New Domestic Safety Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Domestic Safety are now available:

• BS EN 60335-2-23, 2003 Edition with Amendment A2, Household and similar electrical appliances. Safety. Particular requirements for appliances for skin or hair care
• BS EN 60335-2-31, 2014 Edition, Household and similar electrical appliances. Safety. Particular requirements for range hoods and other cooking fume extractors
• BS EN 60335-2-32, 2003 Edition with Amendment A2, Household and similar electrical appliances. Safety. Particular requirements for massage appliances
• BS EN 60335-2-95, 2015 Edition, Household and similar electrical appliances. Safety. Particular requirements for drives for vertically moving garage doors for residential use
• BS EN 60335-2-103, 2015 Edition, Household and similar electrical appliances. Safety. Particular requirements for drives for gates, doors and windows
• BS EN 62115, 2005 Edition with Amendment A12, Electric toys. Safety
• IEC 60335-2-95 Amendment 1, Amendment 1 for Edition 3.0, Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use
• IEC 60335-2-111, Edition 1.0, Household and similar electrical appliances - Safety - Part 2-111: Particular requirements for electric ondol mattress with a non-flexible heated part

For more standards like these, please see our Document Center List of Standards on Domestic Safety.

New Technical Product Documentation Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Technical Product Documentation are now available:

• BS EN 61082-1, 2015 Edition, Preparation of documents used in electrotechnology. Rules
• BS EN 62656-1, 2015 Edition, Standardized product ontology register and transfer by spreadsheets. Logical structure for data parcels
• BS EN ISO 10628-1, 2015 Edition, Diagrams for the chemical and petrochemical industry. Specification of diagrams
• IEC 62656-3, Edition 1.0, Standardized product ontology register and transfer by spreadsheets - Part 3: Interface for Common information Model
• IEC 62708, Edition 1.0, Documents kinds for electrical and instrumentation projects in the process industry
• ISO 16952-10, Withdrawn and replaced by ISO 81346-10, Technical product documentation -- Reference designation system -- Part 10: Power plants
• ISO 81346-10, 1st Edition, Industrial systems, installations and equipment and industrial products - Structuring principles and reference designation - Part 10: Power plants

For more standards like these, please see our Document Center List of Standards on Technical Product Documentation.

New Shipbuilding and Marine Structure Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Shipbuilding and Marine Structures are now available:

• ASTM F2001, 2015 Edition, Standard Guide for Vessel-Related Technical Information for Use in Developing an Electronic Database and Ship Safety Record (Reinstated)
• ASTM F2017, 2015 Edition, Standard Guide for Database Structure of Electronic Data Interchange Between Ship Owner and Shipyard for Contract Administration (Reinstated)
• BS EN 60092-507, 2015 Edition, Electrical installations in ships. Small vessels
• BS EN 62320-1, 2015 Edition, Maritime navigation and radiocommunication equipment and systems. Automatic identification system (AIS). AIS Base Stations. Minimum operational and performance requirements, methods of testing and required test results
• IEC 62320-1, Edition 2.0, Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 1: AIS Base Stations - Minimum operational and performance requirements, methods of testing and required test results
• IEC 62320-3, Edition 1.0, Maritime navigation and radiocommunication equipment and systems - Automatic identification systems (AIS) - Part 3: Repeater stations - Minimum operational and performance requirements - Methods of test and required test results
• ISO 9876, 3rd Edition, Ships and marine technology - Marine facsimile receivers for meteorological charts
• ISO 17941, 1st Edition, Ships and marine technology - Hydraulic hinged watertight fireproof doors
• ISO 22554, 2nd Edition, Ships and marine technology - Propeller shaft revolution indicators - Electric type and electronic type

For more standards like these, please see our Document Center List of Standards on Shipbuilding and Marine Structures.  Most standards are in the level 3 categories.

New Chemical Analysis Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Chemical Analysis are now available:

• ASTM D5932, 2008 Edition with an Editorial Correction, Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace
• ASTM D6069, Withdrawn without replacement, Standard Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection (Withdrawn 2015)
• ASTM D6174, Withdrawn without replacement, Standard Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration (Withdrawn 2015)
• BS EN 50436-2, 2014 Edition with Amendment A1, Alcohol interlocks. Test methods and performance requirements. Instruments having a mouthpiece and measuring breath alcohol for preventive use
• BS EN 50436-6, 2015 Edition, Alcohol interlocks. Test methods and performance requirements. Data security
• BS EN 61207-6, 2015 Edition, Expression of performance of gas analyzers. Photometric analyzers
• BS EN ISO 6141, 2015 Edition, Gas analysis. Contents of certificates for calibration gas mixtures
• ISO 6141, 4th Edition, Gas analysis - Contents of certificates for calibration gas mixtures
• ISO 14707, 2nd Edition, Surface chemical analysis - Glow discharge optical emission spectrometry (GD-OES) - Introduction to use
• ISO 19229, 1st Edition, Gas analysis - Purity analysis and the treatment of purity data

For more standards like these, please see our Document Center List of Standards on Chemical Analysis.  

You may also want to review my previous post:

New Chemical Analysis Standards for the 1st Quarter 2014

New Agricultural Equipment for Plant Care Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards for Agricultural Plant Care Equipment are now available:

• BS EN 13790-1, Withdrawn and replaced by BS EN ISO 16122-2, Agricultural machinery. Sprayers. Inspection of sprayers in use. Field crop sprayers
• BS EN 13790-2, Withdrawn and replaced by BS EN ISO 16122-3, Agricultural machinery. Sprayers. Inspection of sprayers in use. Air-assisted sprayers for bush and tree crops
• BS EN ISO 16122-1, 2015 Edition, Agricultural and forestry machinery. Inspection of sprayers in use. General
• BS EN ISO 16122-2, 2015 Edition, Agricultural and forestry machinery. Inspection of sprayers in use. Horizontal boom sprayers
• BS EN ISO 16122-3, 2015 Edition, Agricultural and forestry machinery. Inspection of sprayers in use. Sprayers for bush and tree crops
• BS EN ISO 16122-4, 2015 Edition, Agricultural and forestry machines. Inspection of sprayers in use. Fixed and semi-mobile sprayers
• ISO 16122-1, 1st Edition, Agricultural and forestry machinery - Inspection of sprayers in use - Part 1: General
• ISO 16122-2, 1st Edition, Agricultural and forestry machinery - Inspection of sprayers in use - Part 2: Horizontal boom sprayers
• ISO 16122-3, 1st Edition, Agricultural and forestry machinery - Inspection of sprayers in use - Part 3: Sprayers for bush and tree crops
• ISO 16122-4, 1st Edition, Agricultural and forestry machines - Inspection of sprayers in use - Part 4: Fixed and semi-mobile sprayers
• ISO 24253-1, 1st Edition, Crop protection equipment - Spray deposition test for field crop - Part 1: Measurement in a horizontal plane
• ISO 24253-2, 1st Edition, Crop protection equipment - Spray deposition test for field crop - Part 2: Measurement in a crop

For more standards like these, please see our Document Center List of Standards on Plant Care Equipment (Agricultural).

New Liquid Fuel Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Liquid Fuels are now available:

• ASTM D93, 2015 Edition, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
• ASTM D396, 2015b Edition, Standard Specification for Fuel Oils
• ASTM D613, 2015 Edition, Standard Test Method for Cetane Number of Diesel Fuel Oil
• ASTM D975, 2015a Edition, Standard Specification for Diesel Fuel Oils
• ASTM D1655, 2015 Edition, Standard Specification for Aviation Turbine Fuels
• ASTM D2274, 2014 Edition, Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
• ASTM D2880, 2015 Edition, Standard Specification for Gas Turbine Fuel Oils
• ASTM D3241, 2014b Edition with Editorial Correction, Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
• ASTM D3699, 2013b Edition with Editorial Correction, Standard Specification for Kerosine
• ASTM D3948, 2014 Edition, Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
• ASTM D4815, 2015a Edition, Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
• ASTM D4860, 2014 Edition, Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
• ASTM D5839, Withdrawn then reinstated, 2015 Edition, Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry 
• ASTM D6729, 2014 Edition, Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography
• ASTM D6751, 2015a Edition, Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
• ASTM D6974, 2009 Edition with a second editorial correction, Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels - Filtration and Culture Procedures
• ASTM D7224, 2014 Edition, Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
• ASTM D7261, 2014 Edition, Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
• ASTM D7467, 2015a Edition, Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
• ASTM D7566, 2014c Edition, Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
• ASTM D7794, 2014 Edition, Standard Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines
• ASTM D7862, 2015 Edition, Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel
• BS EN 16136, 2015 Edition, Automotive fuels. Determination of manganese and iron content in unleaded petrol. Inductively coupled plasma optical emission spectrometry (ICP OES) method
• BS EN 16568, 2014 Edition, Automotive fuels. Blends of Fatty acid methyl ester (FAME) with diesel fuel. Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C
• ISO 17308, 1st Edition, Petroleum products and other liquids - Ethanol - Determination of electrical conductivity

For more standards like these, please see our Document Center List of Standards on Liquid Fuels.

You can also review my previous postings:

New Liquid Fuel Standards for the 4th Quarter 2014

New Liquid Fuel Standards for the 1st Quarter 2014

New Pipeline Components And Pipelines In General Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Pipeline Components And Pipelines In General are now available:

• ASTM F2769, 2014 Edition, Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
• BS EN 15632-1, 2009 Edition with Amendment A1, District heating pipes. Pre-insulated flexible pipe systems. Classification, general requirements and test methods
• BS EN 15632-2, 2010 Edition with Amendment A1, District heating pipes. Pre-insulated flexible pipe systems. Bonded plastic service pipes. Requirements and test methods
• BS EN 15632-3, 2010 Edition with Amendment A1, District heating pipes. Pre-insulated flexible pipe systems. Non bonded system with plastic service pipes; requirements and test methods
• BS EN ISO 13845, 2015 Edition, Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes. Test method for leaktightness under internal pressure and with angular deflection
• DIN EN 13480-1, 2014 Edition, Metallic industrial piping - Part 1: General (English Edition)
• DIN EN 13480-2, 2014 Edition, Metallic industrial piping - Part 2: Materials (English Edition)
• DIN EN 13480-3, 2014 Edition, Metallic industrial piping - Part 3: Design and calculation (English Edition)
• DIN EN 13480-4, 2014 Edition, Metallic industrial piping - Part 4: Fabrication and installation (English Edition)
• DIN EN 13480-5, 2014 Edition, Metallic industrial piping - Part 5: Inspection and testing (English Edition)
• DIN EN 13480-6, 2014 Edition, Metallic industrial piping - Part 6: Additional requirements for buried piping (English Edition)
• DIN EN 13480-8, 2014 Edition, Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping (English Edition)
• ISO 13845, 2nd Edition, Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection
• ISO 13951, 2nd Edition, Plastics piping systems - Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading

For more standards like these, please see our Document Center List of Standards on Pipeline Components And Pipelines In General.

New Acoustics And Acoustic Measurement Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Acoustics And Acoustic Measurements are now available:

• ANSI/ASA S12.72, 2015 Edition, American National Standard Procedure for Measuring the Ambient Noise Level in a Room
• BS EN 1793-4, 2015 Edition, Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics. In situ values of sound diffraction
• BS EN 14462, 2015 Edition, Surface treatment equipment. Noise test code for surface treatment equipment including its ancillary handling equipment. Accuracy grades 2 and 3
• BS EN 60118-4, 2015 Edition, Electroacoustics. Hearing aids. Induction-loop systems for hearing aid purposes. System performance requirements
• BS EN 60318-3, 2015 Edition, Electroacoustics. Simulators of human head and ear. Acoustic coupler for the calibration of supra-aural earphones used in audiometry
• BS EN 60645-1, 2015 Edition, Electroacoustics. Audiometric equipment. Equipment for pure-tone audiometry
• BS EN 60704-2-1, 2015 Edition, Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for vacuum cleaners
• BS EN 62489-1, 2010 Edition with Amendment A1, Electroacoustics. Audio-frequency induction loop systems for assisted hearing. Methods of measuring and specifying the performance of system components
• BS EN ISO 23771, 2015 Edition, Textile machinery. Guide to the design of textile machinery for reduction of the noise emissions
• IEC 62489-1 Amendment 1, Amendment 1 for Edition 1.0, Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components
• ISO 362-1, 2nd Edition, Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and N categories
• ISO 17534-3, 1st Edition, Acoustics - Software for the calculation of sound outdoors - Part 3: Recommendations for quality assured implementation of ISO 9613-2 in software according to ISO 17534-1
• ISO 23771, 1st Edition, Textile machinery - Guide to the design of textile machinery for reduction of the noise emissions

For more standards like these, please see our Document Center List of Standards on Acoustics And Acoustic Measurements.

Also, you'll want to take a look at my previous post:

New Acoustics And Acoustic Measurement Standards for the 3rd Quarter 2013

New Medical Radiographic Equipment Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Medical Radiographic Equipment are now available:

• BS EN 61910-1, 2014 Edition, Medical electrical equipment. Radiation dose documentation. Radiation dose structured reports for radiography and radioscopy
• IEC 62220-1, Withdrawn, Replaced by IEC-62220-1-1, Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1: Determination of the detective quantum efficiency
• IEC 62220-1-1, Edition 1.0, Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-1: Determination of the detective quantum efficiency - Detectors used in radiographic imaging

For more standards like these, please see our Document Center List of Standards on Medical Radiographic Equipment.

You may also want to review my previous post:

New Medical Radiographic Equipment Standards for the 4th Quarter 2014

New Optical Equipment Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Optical Equipment are now available:

• ISO 9022-2, 3rd Edition, Optics and photonics - Environmental test methods - Part 2: Cold, heat and humidity
• ISO 9022-3, 3rd Edition, Optics and photonics - Environmental test methods - Part 3: Mechanical stress
• ISO 9022-4, 3rd Edition, Optics and photonics - Environmental test methods - Part 4: Salt mist
• ISO 9022-6, 2nd Edition, Optics and photonics - Environmental test methods - Part 6: Dust
• ISO 9022-7, 3rd Edition, Optics and photonics - Environmental test methods - Part 7: Resistance to drip or rain
• ISO 9022-8, 2nd Edition, Optics and photonics - Environmental test methods - Part 8: High internal pressure, low internal pressure, immersion
• ISO 9022-11, 2nd Edition, Optics and photonics - Environmental test methods - Part 11: Mould growth
• ISO 9022-12, 2nd Edition, Optics and photonics - Environmental test methods - Part 12: Contamination
• ISO 9022-14, 2nd Edition, Optics and photonics - Environmental test methods - Part 14: Dew, hoarfrost, ice
• ISO 9022-17, 2nd Edition, Optics and photonics - Environmental test methods - Part 17: Combined contamination, solar radiation
• ISO 9022-20, 2nd Edition, Optics and photonics - Environmental test methods - Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide
• ISO 14132-4, 2nd Edition, Optics and photonics - Vocabulary for telescopic systems - Part 4: Terms for astronomical telescopes
• ISO 14490-5 Amendment 1, Amendment 1 for the 1st Edition, Amendment 1: Optics and optical instruments - Test methods for telescopic systems - Part 5: Test methods for transmittance

For more standards like these, please see our Document Center List of Standards on Optical Equipment.

You can also review my previous posts:

New Optical Equipment Standards for the 3rd Quarter 2014

New Optical Equipment Standards for the 2nd Quarter 2014

New Toy and other Entertainment Equipment Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Toys and other Entertainment Equipment are now available:

• ASTM F747, 2006 Edition Reapproved in 2014, Standard Terminology Relating to Amusement Rides and Devices
• ASTM F1159, 2015a Edition, Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards
• ASTM F1898, 2015 Edition,  Standard Specification for Helmets for Non-Motorized Wheeled Vehicle Used by Infants and Toddlers
• ASTM F2075, 2015 Edition, Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
• ASTM F2137, 2015 Edition, Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices
• BS EN 71-14, 2014 Edition, Safety of toys. Trampolines for domestic use
• BS EN 62115, 2005 Edition with Amendment A12, Electric toys. Safety
• DIN EN 71-1, 2015 Edition, Safety of toys - Part 1: Mechanical and physical properties
• DIN EN 71-3, 2014 Edition, Safety of toys - Part 3: Migration of certain elements
• IEC 60335-2-82 Amendment 2, Amendment 2 for Edition 2.0, Amendment 2 - Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
• SS EN 71-14, 2015 Edition, Safety of toys. Trampolines for domestic use

For more standards like these, please see our Document Center List of New Standards on Entertainment Equipment.  It will also have links to the sub-topics included above.

More information can also be found in my previous posts:

New Toy and other Entertainment Equipment Standards for the 3rd Quarter 2014

New Toy and other Entertainment Equipment Standards for the 2nd Quarter 2014

New Toy Standards for the 1st Quarter 2014

New Concrete And Concrete Product Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Concrete And Concrete Products are now available:

• ASTM C55, 2014a Edition, Standard Specification for Concrete Building Brick
• ASTM C123, 2014 Edition, Standard Test Method for Lightweight Particles in Aggregate
• ASTM C127, 2015 Edition, Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
• ASTM C128, 2015 Edition, Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
• ASTM C129, 2014a Edition, Standard Specification for Nonloadbearing Concrete Masonry Units
• ASTM C136, 2014 Edition, Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
• ASTM C139, 2014 Edition, Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
• ASTM C140, 2014b Edition, Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
• ASTM C215, 2014 Edition, Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens
• ASTM C685, 2014 Edition, Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
• ASTM C881, 2014 Edition, Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
• ASTM C1319, 2014 Edition, Standard Specification for Concrete Grid Paving Units
• ASTM C1577, 2015a Edition, Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
• ASTM D7428, 2015 Edition, Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
• DIN EN 480-1, 2015 Edition, Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing
• ISO 10406-1, 2nd Edition, Fibre-reinforced polymer (FRP) reinforcement of concrete - Test methods - Part 1: FRP bars and grids
• ISO 10406-2, 2nd Edition, Fibre-reinforced polymer (FRP) reinforcement of concrete - Test methods - Part 2: FRP sheets

For more standards like these, please see our Document Center Inc. List of Standards on Concrete And Concrete Products.

You may also want to review my previous post:

New Concrete And Concrete Product Standards for the 2nd Quarter 2014

New Fire-Fighting Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Fire-Fighting are now available:

• ASTM D7673, 2015 Edition, Standard Specification for Halon 1211, Bromochlorodifluoromethane (CF_2 BrCl)
• BS 5306-9, 2015 Edition, Fire extinguishing installations and equipment on premises. Recharging of portable fire extinguishers. Code of practice
• BS 6643-1, Withdrawn and replaced by BS 5306-9, Recharging fire extinguishers (manufactured to BS 5423 'Specification for portable fire extinguishers'). Specification for procedure and materials
• BS 6643-2, Withdrawn and replaced by BS 5306-9, Recharging fire extinguishers (manufactured to BS 5423 'Specification for portable fire extinguishers'). Specification for powder refill charges
• BS 9990, 2015 Edition, Non automatic fire-fighting systems in buildings. Code of practice
• ISO 14520-12, 3rd Edition, Gaseous fire-extinguishing systems - Physical properties and system design - Part 12: IG-01 extinguishant
• ISO 14520-13, 3rd Edition, Gaseous fire-extinguishing systems - Physical properties and system design - Part 13: IG-100 extinguishant
• ISO 14520-14, 3rd Edition, Gaseous fire-extinguishing systems - Physical properties and system design - Part 14: IG-55 extinguishant
• ISO 14520-15, 3rd Edition, Gaseous fire-extinguishing systems - Physical properties and system design - Part 15: IG-541 extinguishant

For more standards like these, please see our Document Center List of Standards on Fire-Fighting.

FYI: We will review the new NFPA Fire Protection Standards in a separate post.

New Implants For Surgery, Prosthetics And Orthotics Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Implants For Surgery, Prosthetics And Orthotics are now available:

• AAMI/ISO TIR37137, 2014 Edition, Cardiovascular biological evaluation of medical devices - Guidance for absorbable implants
• ASTM F90, 2014 Edition, Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
• ASTM F382, 2014 Edition, Standard Specification and Test Method for Metallic Bone Plates
• ASTM F1108, 2014 Edition, Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
• ASTM F1264, 2014 Edition, Standard Specification and Test Methods for Intramedullary Fixation Devices
• ASTM F1357, 2014 Edition, Standard Specification for Articulating Total Wrist Implants
• ASTM F1472, 2014 Edition, Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
• ASTM F1983, 2-14 Edition, Standard Practice for Assessment of Selected Tissue Effects of Absorbable Biomaterials for Implant Applications
• ASTM F2064, 2014 Edition, Standard Guide for Characterization and Testing of Alginates as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications
• ASTM F2181, 2014 Edition, Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants
• ASTM F2257, 2014 Edition, Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)
• ASTM F2722, 2015 Edition, Standard Practice for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops
• BS EN ISO 7199, Corrigendum 1 for 2009 Edition, Cardiovascular implants and artificial organs. Blood-gas exchangers (oxygenators)
• ISO 13405-1, 2nd Edition, Prosthetics and orthotics - Classification and description of prosthetic components - Part 1: Classification of prosthetic components
• ISO 13405-2, 2nd Edition, Prosthetics and orthotics - Classification and description of prosthetic components - Part 2: Description of lower limb prosthetic components
• ISO 13405-3, 2nd Edition, Prosthetics and orthotics - Classification and description of prosthetic components - Part 3: Description of upper limb prosthetic components
• ISO 13779-6, 1st Edition, Implants for surgery - Hydroxyapatite - Part 6: Powders
• ISO 29783-2, 1st Edition, Prosthetics and orthotics - Vocabulary - Part 2: Prosthetic gait

For more standards like these, please see our Document Center List of Standards on Implants For Surgery, Prosthetics And Orthotics.

You may also want to review these previous posts:

New Implants For Surgery, Prosthetics And Orthotics Standards for the 4th Quarter 2014

New Implants For Surgery, Prosthetics And Orthotics Standards for the 3rd Quarter 2014

New Implants For Surgery, Prosthetics And Orthotics Standards for the 2nd Quarter 2014

New Implants For Surgery, Prosthetics And Orthotics Standards for the 1st Quarter 2014