Thursday, December 17, 2015

New Air Quality Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Air Quality are now available:


  • ASTM D1356, 2015a Edition, Standard Terminology Relating to Sampling and Analysis of Atmospheres
  • ASTM D2914, 2015 Edition, Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
  • ASTM D6246, 2008 Edition (Reapproved in 2013) with an Editorial Correction, Standard Practice for Evaluating the Performance of Diffusive Samplers
  • ASTM D7440, 2008 Edition Reapproved in 2015 with an Editorial Correction, Standard Practice for Characterizing Uncertainty in Air Quality Measurements
  • ASTM E2115, 2015 Edition, Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities  
  • BS EN 1231, Withdrawn and replaced by BS EN ISO 17621, Workplace atmospheres. Short term detector tube measurement systems. Requirements and test methods
  • BS EN ISO 11665-1, Corrigendum 1 for 2012 Edition, Measurement of radioactivity in the environment. Air: radon-222. Origins of radon and its short-lived decay products and associated measurement methods
  • BS EN ISO 11665-6, Corrigendum 1 for 2012 Edition, Measurement of radioactivity in the environment. Air: radon-222. Spot measurement method of the activity concentration
  • BS EN ISO 17621, 2015 Edition, Workplace atmospheres. Short term detector tube measurement systems. Requirements and test methods
  • ISO 8178-7, 2nd Edition, Reciprocating internal combustion engines - Exhaust emission measurement - Part 7: Engine family determination
  • ISO 8178-8, 2nd Edition, Reciprocating internal combustion engines - Exhaust emission measurement - Part 8: Engine group determination
  • ISO 14644-1, 2nd Edition, Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration
  • ISO 14644-2, 2nd Edition, Cleanrooms and associated controlled environments - Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration
  • ISO-15031-5, 3rd Edition, Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 5: Emissions-related diagnostic services
  • ISO 15031-6, 3rd Edition, Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions
  • ISO 16258-1, 1st Edition, Workplace air - Analysis of respirable crystalline silica by X-ray diffraction - Part 1: Direct-on-filter method
  • ISO 16258-2, 1st Edition, Workplace air - Analysis of respirable crystalline silica by X-ray diffraction - Part 2: Method by indirect analysis
  • ISO 17211, 1st Edition, Stationary source emissions - Sampling and determination of selenium compounds in flue gas
  • ISO 17621, 1st Edition, Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods


For more standards like these, please see our Document Center List of Standards on Air Quality.  Links will take you to the various sub-topics.

You may also want to review my previous post:

Monday, December 14, 2015

New Central Heating System Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Central Heating Systems are now available:


  • BS EN 15377-1, Withdrawn and replaced by BS EN ISO 11855-1, Heating systems in buildings. Design of embedded water based surface heating and cooling systems. Determination of the design heating and cooling capacity
  • BS EN 15377-3, Withdrawn and replaced by BS EN ISO 11855-4, Heating systems in buildings. Design of embedded water based surface heating and cooling systems. Optimizing for use of renewable energy sources
  • BS EN 15502-1, 2012 Edition with Amendment A1, Gas-fired heating boilers. General requirements and tests
  • BS EN ISO 11855-1, 2015 Edition, Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems. Definition, symbols, and comfort criteria
  • BS EN ISO 11855-2, 2015 Edition, Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems. Determination of the design heating and cooling capacity
  • BS EN ISO 11855-3, 2015 Edition, Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems. Design and dimensioning
  • BS EN ISO 11855-4, 2015 Edition, Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems. Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS)
  • BS EN ISO 11855-5, 2015 Edition, Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems. Installation


For more standards like these, please see the Document Center List of Standards on Central Heating Systems.

Friday, December 11, 2015

New Buildings in General Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Buildings in General are now available:


  • ASTM E2506, 2015 Edition, Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities
  • BS 8536, Withdrawn and replaced by BS 8536-1, Facility management briefing. Code of practice
  • BS 8536-1, 2015 Edition, Briefing for design and construction. Code of practice for facilities management (Buildings infrastructure)
  • BS 8895-2, 2015 Edition, Designing for material efficiency in building projects. Code of Practice for concept and developed design
  • BS EN 16627, 2015 Edition, Sustainability of construction works. Assessment of economic performance of buildings. Calculation methods
  • BS EN ISO 11855-2, 2015 Edition, Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems. Determination of the design heating and cooling capacity
  • ISO 15928-1, 2nd Edition, Houses - Description of performance - Part 1: Structural safety
  • ISO 15928-2, 2nd Edition, Houses - Description of performance - Part 2: Structural serviceability
  • ISO 15928-3, 2nd Edition, Houses - Description of performance - Part 3: Structural durability
  • SS EN 16627, 2015 Edition, Sustainability of construction works. Assessment of economic performance of buildings. Calculation methods
  • SS EN ISO 11855-2, 2015 Edition, Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems. Determination of the design heating and cooling capacity


For more standards like these, please see our Document Center List of Standards on Buildings in General.

And you can also take a look at my previous post:

Thursday, December 10, 2015

New Glass And Ceramics Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Glass And Ceramics Industries are now available:


  • ASTM C1273, 2015 Edition, Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
  • ASTM C1275, 2015 Edition, Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
  • ASTM D5359, 1998 Edition Reapproved in 2015, Standard Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber
  • BS EN 12150-1, 2015 Edition, Glass in building. Thermally toughened soda lime silicate safety glass. Definition and description
  • ISO 15733, 2nd Edition, Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of tensile properties
  • ISO 17841, 1st Edition, Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for thermal fatigue of fine ceramics substrate
  • ISO 17859, 1st Edition, Fine ceramics (advanced ceramics, advanced technical ceramics) - Measurement method of piezoelectric strain at high electric field


For more standards like these, follow the links on our Document Center List of Standards on Glass And Ceramics Industries.

Wednesday, December 9, 2015

New Iron Ore Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Iron Ores are now available:


  • ASTM E246, 2010 Edition Reapproved in 2015, Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry
  • ISO 3271, 5th Edition, Iron ores for blast furnace and direct reduction feedstocks - Determination of the tumble and abrasion indices
  • ISO 4689-2, 2nd Edition, Iron ores - Determination of sulfur content - Part 2: Combustion/titration method
  • ISO 4689-3, 2nd Edition, Iron ores - Determination of sulfur content - Part 3: Combustion/infrared method
  • ISO 4695, 4th Edition, Iron ores for blast furnace feedstocks - Determination of the reducibility by the rate of reduction index
  • ISO 4696-1, 3rd Edition, Iron ores for blast furnace feedstocks - Determination of low-temperature reduction-disintegration indices by static method - Part 1: Reduction with CO, CO2, H2 and N2
  • ISO 4696-2, 3rd Edition, Iron ores for blast furnace feedstocks - Determination of low-temperature reduction-disintegration indices by static method - Part 2: Reduction with CO and N2
  • ISO 4700, 4th Edition, Iron ore pellets for blast furnace and direct reduction feedstocks - Determination of the crushing strength
  • ISO 7215, 4th Edition, Iron ores for blast furnace feedstocks - Determination of the reducibility by the final degree of reduction index
  • ISO 8371, 3rd Edition, Iron ores for blast furnace feedstocks - Determination of the decrepitation index
  • ISO 10204, 3rd Edition, Iron ores - Determination of magnesium - Flame atomic absorption spectrometric method
  • ISO 11256, 3rd Edition, Iron ore pellets for shaft direct-reduction feedstocks - Determination of the clustering index
  • ISO 11257, 3rd Edition, Iron ores for shaft direct-reduction feedstocks - Determination of the low-temperature reduction-disintegration index and degree of metallization
  • ISO 11258, 3rd Edition, Iron ores for shaft direct-reduction feedstocks - Determination of the reducibility index, final degree of reduction and degree of metallization
  • ISO 11536, 1st Edition, Iron ores - Determination of loss on ignition - Gravimetric method
  • ISO 13930, 3rd Edition, Iron ores for blast furnace feedstocks - Determination of low-temperature reduction-disintegration indices by dynamic method
  • ISO 15634, 2nd Edition, Iron ores - Determination of chromium content - Flame atomic absorption spectrometric method
  • ISO 16742, 1st Edition Corrected Reprint, Iron ores - Sampling of slurries
  • ISO 18230, 1st Edition, Iron ores - Determination of loss on ignition - Non-oxidised ores


For more standards like these, please see our Document Center List of Standards on Iron Ores.

Tuesday, December 8, 2015

New Road Vehicle Electrical And Electronic Equipment Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Road Vehicle Electrical And Electronic Equipment are now available:


  • BS EN 62321-6, 2015 Edition, Determination of certain substances in electrotechnical products. Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS)
  • IEC 62321-6, Edition 1.0, Determination of certain substances in electrotechnical products - Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatograhy -mass spectometry (GC-MS)
  • IEC 62321-7-1, Edition 1.0, Determination of certain substances in electrotechnical products - Part 7-1: Hexavalent chromium - Presence of hexavalent chromium (Cr(VI)) in colourless and coloured corrosion-protected coatings on metals by the colorimetric method
  • ISO 8820-3, 4th Edition, Road vehicles - Fuse-links - Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)
  • ISO 10924-4, 2nd Edition, Road vehicles - Circuit breakers - Part 4: Medium circuit breakers with tabs (Blade type), Form CB15
  • ISO 15031-5, 3rd Edition, Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 5: Emissions-related diagnostic services
  • ISO 15031-6, 3rd Edition, Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions


Monday, December 7, 2015

New Fiber Optic Interconnecting Device Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Fiber Optic Interconnecting Devices are now available:


  • BS EN 60875-1, 2015 Edition, Fibre optic interconnecting devices and passive components. Non-wavelength-selective fibre optic branching devices. Generic specification
  • BS EN 61300-2-28, Corrigendum 1 for the 2013 Edition, Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Industrial atmosphere (sulphur dioxide)
  • BS EN 61755-3-31, 2015 Edition, Fibre optic interconnecting devices and passive components. Connector optical interfaces. Connector parameters of non-dispersion shifted single mode physically contacting fibres. Angled polyphenylene sulphide rectangular ferrules
  • BS EN 62150-3, 2015 Edition, Fibre optic active components and devices. Test and measurement procedures. Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces
  • IEC 61300-3-50, Corrigendum 2 for Edition 1.0, Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches
  • IEC 61755-3-31, Edition 1.0, Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-31: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled polyphenylene sulphide rectangular ferrules
  • IEC 61755-3-32, Edition 1.0, Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-32: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled thermoset epoxy rectangular ferrules
  • IEC 61977, Edition 3.0, Fiber optic interconnecting devices and passive components - Fibre optic filters - Generic specification
  • IEC 62005-9-1, Edition 1.0, Fibre optic interconnecting devices and passive components - Reliability - Part 9-1: Qualification of passive optical components


Friday, December 4, 2015

New Plastic Fitting Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Plastic Fittings are now available:


  • ASTM D2466, 2015 Edition, Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
  • ASTM D2609, 2015 Edition, Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
  • ASTM F437, 2015 Edition, Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
  • ASTM F438, 2015 Edition, Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
  • ASTM F656, 2015 Edition, Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
  • BS EN ISO 1452-3, Corrigendum 1 for 2010 Edition, Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Fittings
  • ISO 17885, 1st Edition, Plastics piping systems - Mechanical fittings for pressure piping systems - Specifications
  • ISO 18488, 1st Edition, Polyethylene (PE) materials for piping systems - Determination of Strain Hardening Modulus in relation to slow crack growth - Test method
  • ISO 18489, 1st Edition, Polyethylene (PE) materials for piping systems - Determination of resistance to slow crack growth under cyclic loading - Cracked Round Bar test method


For more standards on this topic, please see our Document Center List of Standards on Plastic Fittings.

Thursday, December 3, 2015

New Water Quality - Examination of Water for Chemical Substances Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on the Examination of Water for Chemical Substances are now available:


  • ASTM D2036, 2009 Edition Reapproved in 2015, Standard Test Methods for Cyanides in Water
  • ASTM D4282, 2015 Edition, Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
  • ASTM D5543, 2015 Edition, Standard Test Method for Low-Level Dissolved Oxygen in Water
  • ASTM D5997, 2015 Edition, Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D6317, 2015 Edition,Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D7126, 2015 Edition, Standard Test Method for On-Line Colorimetric Measurement of Silica
  • ASTM D7236, 2015a Edition, Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
  • ASTM D7365, 2009a Edition Reapproved in 2015, Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide
  • BS 6920-4, Withdrawn and replaced by BS EN 15768, Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Method for the GCMS identification of water leachable organic substances
  • BS EN 15768, 2015 Edition, Influence of materials on water intended for human consumption. GC-MS identification of water leachable organic substances
  • BS EN 16691, 2015 Edition, Water quality. Determination of selected polycyclic aromatic hydrocarbons (PAH) in whole water samples. Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
  • BS EN 16693, 2015 Edition, Water quality. Determination of organochlorine pesticides (OCP) in whole water samples. Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
  • BS EN 16694, 2015 Edition, Water quality. Determination of selected polybrominated diphenly ether (PBDE) in whole water samples. Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography-mass spectrometry (GC-MS)
  • ISO 16780, 1st Edition, Water quality - Determination of polychlorinated naphthalenes (PCN) - Method using gas chromatography (GC) and mass spectrometry (MS)
  • ISO 18191, 1st Edition, Water quality - Determination of pHt in sea water - Method using the indicator dye m-cresol purple


Wednesday, December 2, 2015

New Anaesthetic, Respiratory and Reanimation Equipment Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Anaesthetic, Respiratory and Reanimation Equipment are now available:


  • BS 5682, 2015 Edition, Dimensions of probes and terminal units for medical gas supply systems. Requirements
  • BS EN ISO 10651-2, Withdrawn and replaced by BS EN ISO 80601-2-72, Lung ventilators for medical use. Particular requirements for basic safety and essential performance. Home care ventilators for ventilator-dependent patients
  • BS EN ISO 23747, 2015 Edition, Anaesthetic and respiratory equipment. Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
  • BS EN ISO 80601-2-72, 2015 Edition, Medical electrical equipment. Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
  • ISO 17510, 1st Edition, Medical devices - Sleep apnoea breathing therapy - Masks and application accessories
  • ISO 17510-2, Withdrawn and replaced by ISO 17510, Sleep apnoea breathing therapy -- Part 2: Masks and application accessories
  • ISO 23747, 2nd Edition, Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
  • ISO 80601-2-72, 1st Edition,  Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients


Tuesday, December 1, 2015

New Industrial Process Measurement and Control Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Industrial Process Measurement and Control are now available:


  • BS EN 62769-1, 2015 Edition, Field device integration (FDI). Overview
  • BS EN 62769-2, 2015 Edition, Field Device Integration (FDI). FDI Client
  • BS EN 62769-3, 2015 Edition, Devices and integration in enterprise systems; Field Device Integration. FDI Server
  • BS EN 62769-4, 2015 Edition, Field Device Integration (FDI). FDI Packages
  • BS EN 62769-5, 2015 Edition, Field Device Integration (FDI). FDI Information Model
  • BS EN 62769-6, 2015 Edition, Field Device Integration (FDI). FDI Technology Mapping
  • BS EN 62769-7, 2015 Edition, Field Device Integration (FDI). FDI Communication Devices
  • BS EN 62769-101-1, 2015 Edition, Field Device Integration (FDI). Profiles. Foundation Fieldbus H1
  • BS EN 62769-101-2, 2015 Edition, Field Device Integration (FDI). Profiles. Foundation Fieldbus HSE
  • BS EN 62769-103-1, 2015 Edition, Field Device Integration (FDI). Profiles. PROFIBUS
  • BS EN 62769-103-4, 2015 Edition, Field Device Integration (FDI). Profiles. PROFINET
  • BS EN 62769-109-1, 2015 Edition, Field Device Integration (FDI). Profiles. HART(r) and WirelessHART(r)
  • IEC 60534-8-4, Edition 3.0, Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow
  • IEC 61784-5-4 Amendment 1 for Edition 1.0, Amendment 1 - Industrial communication networks - Profiles - Part 5-4: Installation of fieldbuses - Installation profiles for CPF 4
  • IEC 61804-3, Edition 3.0, Function Blocks (FB) for process control and Electronic Device Description Language (EDDL) - Part 3: EDDL syntax and semantics
  • IEC 61804-5, Edition 1.0, Function blocks (FB) for process control and electronic device description language (EDDL) - Part 5: EDDL Builtin library
  • IEC 61987-21, Edition 1.0, Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21: List of Properties (LOP) of automated valves for electronic data exchange - Generic structures
  • IEC 61987-22, Edition 1.0, Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 22: Lists of Properties (LOPs) of valve body assemblies for electronic data exchange
  • IEC 61987-23, Edition 1.0, Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 23: Lists of Properties (LOPs) of actuators for electronic data exchange
  • IEC 61987-24-1, Edition 1.0, Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-1: List of Properties (LOPs) of positioners and I/P converters for electronic data exchange
  • IEC 62443-2-3, Edition 1.0, Security for industrial automation and control systems - Part 2-3: Patch management in the IACS environment
  • IEC 62443-2-4, Edition 1.0, Security for industrial automation and control systems - Part 2-4: Security program requirements for IACS service providers


Monday, November 30, 2015

New Chemical Analysis Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Chemical Analysis are now available:


  • ASTM D2650, 2010 Edition Reapproved in 2015, Standard Test Method for Chemical Composition of Gases by Mass Spectrometry
  • ASTM D5902, 2005 Edition Reapproved in 2015, Standard Test Method for Rubber - Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
  • ASTM D6843, 2010 Edition Reapproved in 2015, Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)
  • ASTM D6854, 2015 Edition, Standard Test Method for Silica-Oil Absorption Number
  • ASTM E1386, 2015 Edition, Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction
  • BS EN 61207-7, Corrigendum 1 for 2013 Edition, Expression of performance of gas analyzers. Tuneable semiconductor laser gas analyzers
  • BS EN ISO 6142, Withdrawn and replaced by BS EN ISO 6142-1, Gas analysis. Preparation of calibration gas mixtures. Gravimetric method
  • BS EN ISO 6142-1, 2015 Edition, Gas analysis. Preparation of calibration gas mixtures. Gravimetric method for Class I mixtures
  • ISO 6142, Withdrawn and replaced by ISO-6142-1, Gas analysis -- Preparation of calibration gas mixtures -- Gravimetric method
  • ISO 6142-1, 1st Edition, Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures
  • ISO 13083, 1st Edition, Surface chemical analysis - Scanning probe microscopy - Standards on the definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes
  • ISO 17109, 1st Edition, Surface chemical analysis - Depth profiling - Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films
  • ISO 18507, 1st Edition, Surface chemical analysis - Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis


For more standards like these, please see our Document Center List of Standards on Chemical Analysis.

Wednesday, November 25, 2015

New Food Technology Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Food Technology are now available:


  • ASTM D5974, 2015 Edition, Standard Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography
  • ASTM E253, 2015a Edition, Standard Terminology Relating to Sensory Evaluation of Materials and Products
  • BS EN 1674, 2015 Edition, Food processing machinery. Dough sheeters. Safety and hygiene requirements
  • BS EN 13870, 2015 Edition, Food processing machinery, Portion cutting machines. Safety and hygiene requirements
  • BS EN ISO 10504, 2015 Edition, Starch derivatives. Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups. Method using high-performance liquid chromatography
  • BS EN ISO 10519, 2015 Edition with Corrigendum 1, Rapeseed. Determination of chlorophyll content. Spectrometric method
  • BS EN ISO 11085, 2015 Edition, Cereals, cereals-based products and animal feeding stuffs. Determination of crude fat and total fat content by the Randall extraction method
  • DIN EN 14108, 2015 Edition, Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of sodium content by atomic absorption spectrometry
  • ISO 10519, 3rd Edition, Rapeseed - Determination of chlorophyll content - Spectrometric method
  • ISO 11085, 2nd Edition, Cereals, cereals-based products and animal feeding stuffs - Determination of crude fat and total fat content by the Randall extraction method
  • ISO 16488, 1st Edition, Marine finfish farms - Open net cage - Design and operation
  • ISO 16541, 1st Edition, Methods for sea lice surveillance on marine finfish farms
  • ISO 16741, 1st Edition, Traceability of crustacean products - Specifications on the information to be recorded in farmed crustacean distribution chains
  • ISO 16779, 1st Edition, Sensory analysis - Assessment (determination and verification) of the shelf life of foodstuffs
  • ISO 17780, 1st Edition, Animal and vegetable fats and oils - Determination of aliphatic hydrocarbons in vegetable oils
  • ISO 18363-1, 1st Edition, Animal and vegetable fats and oils - Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS - Part 1: Method using fast alkaline transesterification and measurement for 3-MCPD and differential measurement for glycidol
  • ISO 18538, 1st Edition, Traceability of molluscan products - Specifications on the information to be recorded in farmed molluscan distribution chains
  • ISO 18539, 1st Edition, Traceability of molluscan products - Specifications on the information to be recorded in captured molluscan distribution chains


For more documents like these, please see our Document Center List of Standards on Food Technology.

And today at StandardsForum.com I have posted about Food Safety Standards News.  Take a look!

Tuesday, November 24, 2015

New Textile Fabric Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Textile Fabrics are now available:


  • ASTM D1777, 1996 Edition Reapproved in 2015, Standard Test Method for Thickness of Textile Materials
  • ASTM D3050, 2007 Edition Reapproved in 2015, Standard Guide for Measuring Soil Removal from Artificially Soiled Fabrics (Not Suitable for Detergent Ranking)
  • ASTM D3511, 2015 Edition, Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
  • ASTM D3787, 2015 Edition, Standard Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test
  • ASTM D3885, 2007a Edition Reapproved in 2015, Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
  • ASTM D3886, 1999 Edition Reapproved in 2015, Standard Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus)
  • ASTM D4685, 2015 Edition, Standard Test Method for Pile Fabric Abrasion
  • ASTM D5035, 2011 Edition Reapproved in 2015, Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
  • ASTM D5587, 2015 Edition, Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
  • ASTM D6413, 2015 Edition, Standard Test Method for Flame Resistance of Textiles (Vertical Test)
  • ASTM D6479, 2015 Edition, Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints
  • ASTM D6614, 2007 Edition Reapproved in 2015, Standard Test Method for Stretch Properties of Textile Fabrics - CRE Method
  • ASTM D6770, 2007 Edition Reapproved in 2015, Standard Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method)
  • ASTM D6797, 2015 Edition, Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
  • ASTM D6828, 2002 Edition Reapproved in 2015, Standard Test Method for Stiffness of Fabric by Blade/Slot Procedure
  • ISO 17608, 1st Edition, Textiles - Bare elastane yarns - Determination of resistance to chlorinated water (swimming-pool water)


For more standards like these, please see our Document Center List of Standards on Textile Fabrics.

Monday, November 23, 2015

New Agricultural Machines, Implements and Equipment Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on  Agricultural Machines, Implements and Equipment are now available:


  • ASTM D5093, 2015 Edition, Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
  • ASTM E1519, 2015a Edition, Standard Terminology Relating to Agricultural Tank Mix Adjuvants
  • BS EN ISO 16231-2, 2015 Edition, Self-propelled agricultural machinery. Assessment of stability. Determination of static stability and test procedures
  • BS EN ISO 17962, 2015 Edition, Agricultural machinery. Equipment for sowing. Minimization of the environmental effects of fan exhaust from pneumatic systems
  • ISO 789-3, 3rd Edition, Agricultural tractors - Test procedures - Part 3: Turning and clearance diameters
  • ISO 3600, 4th Edition, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Operators manuals - Content and format
  • ISO 5131, 3rd Edition, Tractors for agriculture and forestry - Measurement of noise at the operators position - Survey method
  • ISO 6535, 4th Edition, Portable chain-saws - Chain brake performance
  • ISO 11783-10, 2nd Edition, Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 10: Task controller and management information system data interchange
  • ISO 16230-1, 1st Edition, Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements
  • ISO 16231-2, 1st Edition, Self-propelled agricultural machinery - Assessment of stability - Part 2: Determination of static stability and test procedures
  • ISO 17962, 1st Edition, Agricultural machinery - Equipment for sowing - Minimization of the environmental effects of fan exhaust from pneumatic systems
  • ISO 19858, 1st Edition, Forestry machines - Portable chain-saws - Test method for evaluating saw chain oil lubricity


Friday, November 20, 2015

New Sports Equipment And Facility Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Sports Equipment And Facilities are now available:


  • ASTM F381, 2015 Edition, Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
  • ASTM F910, 2004 Edition Reapproved in 2015, Standard Specification for Face Guards for Youth Baseball
  • ASTM F1081, 2009 Edition Reapproved in 2015, Standard Specification for Competition Wrestling Mats
  • ASTM F1107, 2004 Edition Reapproved in 2015, Standard Terminology Relating to Snowboarding
  • ASTM F1492, 2015 Edition, Standard Specification for Helmets Used in Skateboarding and Trick Roller Skating
  • ASTM F1722, 2015 Edition, Standard Test Method for Determining Mass and Moment of Inertia of Alpine Skis
  • ASTM F1882, 2015 Edition, Standard Specification for Residential Basketball Systems
  • ASTM F2225, 2015 Edition, Standard Safety Specification for Consumer Trampoline Enclosures
  • ASTM F2571, 2011 Edition Reapproved in 2015, Standard Specification for Paintball Marker Barrel Blocking Devices
  • BS EN 16582-1, 2015 Edition, Domestic swimming pools. General requirements including safety and test methods
  • BS EN 16582-2, 2015 Edition, Domestic swimming pools. Specific requirements including safety and test methods for inground pools
  • BS EN 16582-3, 2015 Edition, Domestic swimming pools. Specific requirements including safety and test methods for aboveground pools
  • BS EN 16664, 2015 Edition, Playing field equipment. Lightweight goals. Functional, safety requirements and test methods
  • PAS 520, 2015 Edition, Safeguarding 0 to 4 year old children within the teaching of swimming, including any associated professional photography. Code of practice
  • ISO 8783, 2nd Edition, Alpine skis - Guidelines for conducting slope performance tests
  • ISO 9523, 3rd Edition, Touring ski-boots for adults - Interface with touring ski-bindings - Requirements and test methods
  • ISO 9838, 3rd Edition, Alpine and touring ski-bindings - Test soles for ski-binding tests
  • ISO 11087, 3rd Edition, Alpine ski-bindings - Retention devices - Requirements and test methods
  • ISO 11110, 2nd Edition, Winter-sports equipment - Test devices for the setting of the functional unit ski/boot/binding - Requirements and tests
  • SS EN 16582-1, 2015 Edition, Domestic swimming pools. General requirements including safety and test methods (English Language)
  • SS EN 16582-2, 2015 Edition, Domestic swimming pools. Specific requirements including safety and test methods for inground pools (English Language)
  • SS EN 16582-3, 2015 Edition, Domestic swimming pools. Specific requirements including safety and test methods for aboveground pools (English Language)
  • SS EN 16664, 2015 Edition, Playing field equipment. Lightweight goals. Functional, safety requirements and test methods (English Language)


For more standards like these, please see our Document Center List of Standards on Sports Equipment And Facilities.

You can also review my previous post:

Thursday, November 19, 2015

New FDA Medical Device Guidance Documents for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following FDA Medical Device Guidance Documents are now available:




You may also want to review my previous post:

Wednesday, November 18, 2015

New Semiconductor Standards for 2015

Document Center Inc. is pleased to announce that the following New Standards on Semiconductor Devices are now available:


  • BS EN 60747-5-5, 2011 Edition with Amendment A1, Semiconductor devices. Discrete devices. Optoelectronic devices. Photocouplers
  • BS EN 62007-1, 2015 Edition, Semiconductor optoelectronic devices for fibre optic system applications. Specification template for essential ratings and characteristics
  • BS EN 62031, 2008 Edition with Amendment A2, LED modules for general lighting. Safety specifications
  • BS EN 62047-15, 2015 Edition, Semiconductor devices. Micro-electromechanical devices. Test method of bonding strength between PDMS and glass
  • BS EN 62047-16, 2015 Edition, Semiconductor devices. Micro-electromechanical devices. Test methods for determining residual stresses of MEMS films. Wafer curvature and cantilever beam deflection methods
  • BS EN 62047-17, 2015 Edition, Semiconductor devices. Micro-electromechanical devices. Bulge test method for measuring mechanical properties of thin films
  • IEC 60700-1, Edition 2.0, Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
  • IEC 62007-1, Edition 3.0, Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics
  • IEC 62047-15, Edition 1.0, Semiconductor devices - Micro-electromechanical devices - Part 15: Test method of bonding strength between PDMS and glass
  • IEC 62047-16, Edition 1.0, Semiconductor devices - Micro-electromechanical devices - Part 16: Test methods for determining residual stresses of MEMS films - Wafer curvature and cantilever beam deflection methods
  • IEC 62047-17, Edition 1.0, Semiconductor devices - Micro-electromechanical devices - Part 17: Bulge test method for measuring mechanical properties of thin films


For more standards like these, please see our Document Center List of Standards on Semiconductor Devices.

Tuesday, November 17, 2015

New Fastener Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Fasteners are now available:


  • ASME B18.2.2, 2015 Edition, Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts (Inch Series)
  • ASME B18.24, 2015 Edition, Part Identifying Number (PIN) Code System Standard for B18 Fastener Products
  • ASTM A502, 2003 Edition Reapproved in 2015, Standard Specification for Rivets, Steel, Structural
  • ASTM A563, 2015 Edition, Standard Specification for Carbon and Alloy Steel Nuts
  • ASTM A1078, 2012 Edition with Editorial Correction, Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement
  • ASTM F879, 2015 Edition, Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
  • ASTM F2282, 2003 Edition Reapproved in 2015, Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners


For more standards like these, please see our Document Center List of Standards on Fasteners.

Monday, November 16, 2015

New Environmental Protection Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Environmental Protection are now available:


  • ASTM C1512, 2010 Edition Reapproved in 2015 with an Editorial Correction, Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
  • ASTM D6044, 1996 Edition Reapproved in 2015, Standard Guide for Representative Sampling for Management of Waste and Contaminated Media
  • ASTM E2101, 2015 Edition, Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer
  • ASTM F2576, 2015a Edition, Standard Terminology Relating to Declarable Substances in Materials
  • BS EN 62321-6, 2015 Edition, Determination of certain substances in electrotechnical products. Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS)
  • BS EN ISO 14001, 2015 Edition, Environmental management systems. Requirements with guidance for use
  • BS EN ISO 14045, Corrigendum 1 for 2012 Edition, Environmental management. Eco-efficiency assessment of product systems. Principles, requirements and guidelines
  • IEC 60050-904, Amendment 1 for Edition 1.0, International Electrotechnical Vocabulary - Part 904: Environmental standardization for electrical and electronic products and systems
  • IEC 62321-6, Edition 1.0, Determination of certain substances in electrotechnical products - Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatograhy -mass spectometry (GC-MS)
  • IEC 62321-7-1, Edition 1.0, Determination of certain substances in electrotechnical products - Part 7-1: Hexavalent chromium - Presence of hexavalent chromium (Cr(VI)) in colourless and coloured corrosion-protected coatings on metals by the colorimetric method
  • ISO 13065, 1st Edition, Sustainability criteria for bioenergy
  • ISO 14001, 3rd Edition, Environmental management systems - Requirements with guidance for use


For more standards like these, please see our Document Center List of Standards on Environmental Protection.

Friday, November 13, 2015

New Sterilization and Disinfection Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Sterilization and Disinfection are now available:


  • ASTM E1173, 2015 Edition, Standard Test Method for Evaluation of Preoperative, Precatheterization, or Preinjection Skin Preparations
  • BS EN 556-2, 2015 Edition, Sterilization of medical devices. Requirements for medical devices to be designated 'STERILE'. Requirements for aseptically processed medical devices
  • BS EN 14476, 2013 Edition with Amendment A1, Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of virucidal activity in the medical area. Test method and requirements (Phase 2/Step 1)
  • BS EN 14885, 2015 Edition, Chemical disinfectants and antiseptics. Application of European Standards for chemical disinfectants and antiseptics
  • BS EN 16616, 2015 Edition, Chemical disinfectants and antiseptics. Chemical-thermal textile disinfection. Test method and requirements (phase 2, step 2)
  • BS EN 61010-031, 2015 Edition, Safety requirements for electrical equipment for measurement, control and laboratory use. Safety requirements for hand-held probe assemblies for electrical measurement and test
  • BS EN 61010-2-040, 2015 Edition, Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
  • BS EN ISO 11137-1, 2015 Edition, Sterilization of health care products. Radiation. Requirements for development, validation and routine control of a sterilization process for medical devices
  • BS EN ISO 11137-2, 2015 Edition, Sterilization of health care products. Radiation. Establishing the sterilization dose
  • BS EN ISO 13408-1, 2015 Edition, Aseptic processing of health care products. General requirements
  • BS EN ISO 13408-7, Corrigendum 1 for 2013 Edition, Aseptic processing of health care products. Alternative processes for medical devices and combination products
  • BS EN ISO 15883-6, 2015 Edition, Washer-disinfectors. Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive, non-critical medical devices and healthcare equipment
  • SS EN 14476, 2013 Edition with Amendment A1, Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of virucidal activity in the medical area. Test method and requirements (Phase 2/Step 1)
  • SS EN 14885, 2015 Edition, Chemical disinfectants and antiseptics. Application of European Standards for chemical disinfectants and antiseptics
  • SS EN 16616, 2015 Edition, Chemical disinfectants and antiseptics. Chemical-thermal textile disinfection. Test method and requirements (phase 2, step 2)
  • SS EN ISO 11137-1, 2015 Edition, Sterilization of medical devices. Requirements for medical devices to be designated 'STERILE'. Requirements for aseptically processed medical devices
  • SS EN ISO 11137-2, 2015 Edition, Sterilization of health care products. Radiation. Establishing the sterilization dose
  • SS EN ISO 13408-12015 Edition, Aseptic processing of health care products. General requirements


For more standards like these, please see our Document Center List of Standards on Sterilization and Disinfection (for Healthcare).