Tuesday, January 31, 2017

New Electrical Engineering Standards for the 4th Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Electrical Engineering in General are now available;


  • BS EN 62305-4, 2011 Edition, Protection against lightning. Electrical and electronic systems within structures
  • BS EN 60695-1-21, 2016 Edition, Fire hazard testing. Guidance for assessing the fire hazard of electrotechnical products. Ignitability. Summary and relevance of test methods
  • BS EN 60695-10-3, 2016 Edition, Fire hazard testing. Abnormal heat. Mould stress relief distortion test
  • BS EN 61340-5-1, 2016 Edition, Electrostatics. Protection of electronic devices from electrostatic phenomena. General requirements
  • IEC 60050-161-AM6, Amendment 6 for Edition 1.0, Amendment 6 - International electrotechnical vocabulary - Part 161: Electromagnetic compatibility
  • IEC 60050-561-AM1, Amendment 1 for Edition 2.0, Amendment 1 - International electrotechnical vocabulary - Part 561: Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection
  • IEC 60050-701-AM1, Amendment 1 for Edition 1.0,  Amendment 1 - International electrotechnical vocabulary - Part 701: Telecommunications, channels and networks
  • IEC 60050-702-AM2, Amendment 2 for Edition 1.0, Amendment 2 - International electrotechnical vocabulary - Part 702: Oscillations, signals and related devices
  • IEC 60050-705-AM2, Amendment 2 for Edition 1.0, Amendment 2 - International electrotechnical vocabulary - Part 705: Radio wave propagation
  • IEC 60050-721-AM1, Amendment 1 for Edition 1.0, Amendement 1 - International electrotechnical vocabulary - Part 721: Telegraphy, facsimile and data communication
  • IEC 60050-815-AM1, Amendment 1 for Edition 2.0, Amendment 1 - International electrotechnical vocabulary - Part 815: Superconductivity
  • IEC 60204-1, Edition 6.0, Safety of machinery - Electrical equipment of machines - Part 1: General requirements
  • IEC 60695-1-10, Edition 2.0, Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
  • IEC 60695-8-1, Edition 3.0, Fire hazard testing - Part 8-1: Heat release - General guidance
  • IEC 60695-8-2, Edition 1.0, Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
  • IEC 60695-11-5, Edition 2.0, Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance


For more standards like these, please refer to our Document Center List of Standards on Electrical Engineering in General.

Monday, January 30, 2017

New Processes and Auxiliary Material Standards for the 4th Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Processes and Auxiliary Materials are now available;

  • ASTM D4901, 1999 Edition Reapproved in 2016, Standard Practice for Preparation of Solution of Liquid Vegetable Tannin Extracts
  • ASTM D6020, 2000 Edition Reapproved in 2016, Standard Practice for Calculation of (Non-Mineral) Combined Tanning Agents and Degree of Tannage
  • ASTM D6401, 1999 Edition Reapproved in 2016, Standard Test Method for Determining Non-Tannins and Tannin in Extracts of Vegetable Tanning Materials
  • ASTM D6656, 2016 Edition, Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation)


For more standards like these, please refer to our Document Center List of Standards on Processes and Auxiliary Materials.

Friday, January 27, 2017

New Hospital Equipment Standards for the 4th Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Hospital Equipment are now available;


  • ASTM D7160, 2016 Edition, Standard Practice for Determination of Expiration Dating for Medical Gloves
  • BS ISO 22882, 2016 Edition, Castors and wheels. Requirements for castors for hospital beds
  • ISO 22882, 2nd Edition, Castors and wheels - Requirements for castors for hospital beds


For more Standards like these, please refer to our Document Center List of Standards on Hospital Equipment.

Thursday, January 26, 2017

New Physicochemical Methods of Analysis Standards for the 4th Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Physicochemical Methods of Analysis are now available;


  • ASTM C1510, 2001 Edition Reapproved in 2016, Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
  • ASTM D5953M, 2016 Edition, Standard Test Method for Determination of Non-methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection
  • ASTM D6010, Withdrawn Without Replacement, Standard Practice for Closed Vessel Microwave Solvent Extraction of Organic Compounds from Solid Matrices
  • ASTM D6304, 2016 Edition with Editorial Correction, Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
  • ASTM D7707, 2011 Edition Reapproved in 2016, Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust
  • ASTM D7169, 2016 Edition, Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
  • ASTM E1644, 2004 Edition Reapproved in 2016 with Editorial Correction, Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
  • ASTM E1726, 2016 Edition, Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
  • ASTM E1941, 2010 Edition Reapproved in 2016, Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
  • ASTM E1979, 2012 Edition Reapproved in 2016, Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
  • ASTM E2108, 2016 Edition, Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
  • ASTM E2857, 2011 Edition Reapproved in 2016, Standard Guide for Validating Analytical Methods
  • BS EN 16877, 2016 Edition, Animal feeding stuffs. Methods of sampling and analysis. Determination of T-2 and HT-2 toxins, Deoxynivalenol and Zearalenone, in feed materials and compound feed by LCMS


For more standards like these, please refer to our Document Center List of Standards on Physicochemical Methods of Analysis

Wednesday, January 25, 2017

New Space Systems And Operations Standards for the 4th Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Space Systems and Operations are now available;

  • ASTM E1216, 2011 Edition Reapproved in 2016, Standard Practice for Sampling for Particulate Contamination by Tape Lift
  • BS EN 13291-3, Withdrawn and Replaced by BS EN 16602-70, Space products assurance. General requirements. Materials, mechanical parts and processes
  • BS EN 16602-70, 2016 Edition, Space product assurance. Materials, mechanical parts and processes
  • BS EN 16602-70-12, 2016 Edition, Space product assurance. Design rules for printed circuit boards
  • BS EN 16803-1, 2016 Edition, Space. Use of GNSS-based positioning for road Intelligent Transport Systems (ITS). Definitions and system engineering procedures for the establishment and assessment of performances
  • BS ISO 10537, 2016 Edition, Space data and information transfer systems. Encapsulation service
  • BS ISO 17540, 2016 Edition, Space systems. Liquid rocket engines and test stands. Terms and definitions
  • BS ISO 18257, 2016 Edition, Space systems. Semiconductor integrated circuits for space applications. Design requirements
  • BS ISO 18440, 2016 Edition, Space data and information transfer systems. Space link extension. Internet protocol for transfer services
  • BS ISO 18441, 2016 Edition, Space data and information transfer systems. Space link extension. Application program interface for transfer services. Core specification
  • BS ISO 18442, 2016 Edition, Space data and information transfer systems. Space link extension. Application program interface for return all frames service
  • BS ISO 18443, 2016 Edition, Space data and information transfer systems. Space link extension. Application program interface for return channel frames service
  • BS ISO 18444, 2016 Edition, Space data and information transfer systems. Space link extension. Application program interface for return operational control fields service
  • BS ISO 18445, 2016 Edition, Space data and information transfer systems. Space Link Extension. Application Program Interface for the Forward CLTU Service
  • BS ISO 18446, 2016 Edition, Space data and information transfer systems. Space link extension. Application program interface for the forward space packet service
  • BS ISO 21323, 2016 Edition, Space data and information transfer systems. Bundle protocol specification
  • BS ISO 21324, 2016 Edition, Space data and information transfer systems. Space data link security protocol
  • BS ISO 22645, 2016 Edition, Space data and information transfer systems. TM (telemetry) space data link protocol
  • BS ISO 22664, 2016 Edition, Space data and information transfer systems. TC (telecommand) space data link protocol
  • BS ISO 22666, 2016 Edition, Space data and information transfer systems. AOS (advanced orbiting systems) space data link protocol
  • ISO 10537, 2nd Edition, Space data and information transfer systems - Encapsulation service
  • ISO 17540, 1st Edition, Space systems - Liquid rocket engines and test stands - Terms and definitions
  • ISO 17666, 2nd Edition, Space systems - Risk management
  • ISO 18257, 1st Edition, Space systems - Semiconductor integrated circuits for space applications - Design requirements
  • ISO 18440, 2nd Edition, Space data and information transfer systems - Space link extension - Internet protocol for transfer services
  • ISO 18441, 2nd Edition, Space data and information transfer systems - Space link extension - Application program interface for transfer services - Core specification
  • ISO 18442, 2nd Edition, Space data and information transfer systems - Space link extension - Application program interface for return all frames service
  • ISO 18443, 2nd Edition, Space data and information transfer systems - Space link extension - Application program interface for return channel frames service
  • ISO 18444, 2nd Edition, Space data and information transfer systems - Space link extension - Application program interface for return operational control fields service
  • ISO 18445, 2nd Edition, Space data and information transfer systems - Space link extension - Application program interface for the forward CLTU service
  • ISO 18446, 2nd Edition, Space data and information transfer systems - Space link extension - Application program interface for the forward space packet service
  • ISO 21323, 1st Edition, Space data and information transfer systems - CCSDS Bundle protocol specification
  • ISO 21324, 1st Edition, Space data and information transfer systems - Space data link security protocol
  • ISO 22645, 2nd Edition, Space data and information transfer systems - TM (telemetry) space data link protocol
  • ISO 22664, 3rd Edition, Space data and information transfer systems - TC (telecommand) space data link protocol
  • ISO 22666, 3rd Edition, Space data and information transfer systems - AOS (advanced orbiting systems) space data link protocol


For more standards like these, please refer to our Document Center List of Standards on Space Systems and Operations.

Tuesday, January 24, 2017

New Nanotechnology Standards for the 4th Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Nanotechnology are now available;


  • ASTM D4948, 1989 Edition Reapproved in 2016, Standard Test Method for Determination of the Upper Layer Separated from a Viscous Liquid
  • ASTM E1620, 1997 Edition Reapproved in 2016, Standard Terminology Relating to Liquid Particles and Atomization
  • IEC 62607-6-4, Edition 1.0, Nanomanufacturing - Key control characteristics - Part 6-4: Graphene - Surface conductance measurement using resonant cavity


For more standards like these, please refer to our Document Center List of Standards on Physics, Chemistry.

Friday, January 20, 2017

New Cement, Gypsum, Lime, and Mortar Standards for the 4th Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Cement, Gypsum, Lime, and Mortar are now available;


  • ASTM C151, 2016 Edition, Standard Test Method for Autoclave Expansion of Hydraulic Cement
  • ASTM C183, 2016 Edition, Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
  • ASTM C188, 2016 Edition, Standard Test Method for Density of Hydraulic Cement
  • ASTM C473, 2016 Edition, Standard Test Methods for Physical Testing of Gypsum Panel Products
  • ASTM C780, 2016A Edition, Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
  • ASTM C840, 2016 Edition, Standard Specification for Application and Finishing of Gypsum Board
  • ASTM C1063, 2016C Edition, Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
  • ASTM C1329, 2016A Edition, Standard Specification for Mortar Cement
  • ASTM C1506, 2016B Edition, Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
  • ASTM C1622, 2010 Edition Reapproved in 2016 with Editorial Correction, Standard Specification for Cold-Weather Admixture Systems
  • ASTM C1697, 2016 Edition, Standard Specification for Blended Supplementary Cementitious Materials
  • BS EN 196-3, 2016 Edition, Methods of testing cement. Determination of setting times and soundness
  • BS EN 413-2, 2016 Edition, Masonry cement. Test methods
  • BS EN 998-1, 2016 Edition, Specification for mortar for masonry. Rendering and plastering mortar
  • BS EN 998-2, 2016 Edition, Specification for mortar for masonry . Masonry mortar
  • DIN EN 13914-1, 2016 Edition, Design, preparation and application of external rendering and internal plastering - Part 1: External rendering
  • DIN EN 13914-2, 2016 Edition, Design, preparation and application of external rendering and internal plastering - Part 2: Internal plastering


For more standards like these, please refer to our Document Center List of Standards on Cement, Gypsum, Lime, and Mortar

Wednesday, January 18, 2017

New Fuel Systems Standards for the 4th Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Fuel Systems are now available;


  • BS ISO 13296, 2016 Edition, Diesel engines. High-pressure fuel injection pipe assemblies. General requirements and dimensions
  • BS ISO 13775-2, 2016 Edition, Thermoplastic tubing and hoses for automotive use. Petroleum-based-fuel applications
  • BS ISO 13948-2, 2016 Edition, Diesel engines. Fuel injection pumps and fuel injector low-pressure connections. Non-threaded (push-on) connections
  • BS ISO 15501-1, 2016 Edition, Road vehicles. Compressed natural gas (CNG) fuel systems. Safety requirements
  • BS ISO 15501-2, 2016 Edition, Road vehicles. Compressed natural gas (CNG) fuel systems. Test methods
  • BS ISO 18418-1, 2016 Edition, Gasoline engines. Medium pressure liquid fuel supply connections. 60° female cone connectors
  • BS ISO 19724, 2016 Edition, Gasoline engines with direct injection. Cleanliness assessment of fuel injection equipment
  • BS ISO 8535-1, 2016 Edition, Diesel engines. Steel tubes for high-pressure fuel injection pipes. Requirements for seamless cold-drawn single-wall tubes
  • ISO 2698, 4th Edition, Diesel engines - Clamp-mounted fuel injectors, types 7 and 28
  • ISO 2974, 8th Edition, Diesel engines - 60° female cones for high-pressure fuel injection components
  • ISO 8535-1, 6th Edition, Diesel engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes
  • ISO 13296, 4th Edition, Diesel engines - High-pressure fuel injection pipe assemblies - General requirements and dimensions
  • ISO 13775-2, 2nd Edition, Thermoplastic tubing and hoses for automotive use - Part 2: Petroleum-based-fuel applications
  • ISO 13948-2, 3rd Edition, Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 2: Non-threaded (push-on) connections
  • ISO 15501-1, 3rd Edition, Road vehicles - Compressed natural gas (CNG) fuel systems - Part 1: Safety requirements
  • ISO 15501-2, 2nd Edition, Road vehicles - Compressed natural gas (CNG) fuel systems - Part 2: Test methods
  • ISO 18418-1, 2nd Edition, Gasoline engines - Medium pressure liquid fuel supply connections - Part 1: 60° female cone connectors
  • ISO 19724, 1st Edition, Gasoline engines with direct injection - Cleanliness assessment of fuel injection equipment


For more standards like these, please refer to our Document Center List of Standards on Fuel Systems.

Tuesday, January 17, 2017

New Advanced Ceramics Standards for the 4th Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Advanced Ceramics are now available;


  • ASTM C1291, 2016 Edition, Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Monolithic Advanced Ceramics
  • ASTM C1495, 2016 Edition, Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
  • BS ISO 14705, 2016 Edition, Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for hardness of monolithic ceramics at room temperature.
  • BS ISO 19603, 2016 Edition, Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus and bending strength of thick ceramic coatings
  • BS ISO 22197-1, 2016 Edition, Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials. Removal of nitric oxide
  • DIN EN 1071-1, Withdrawn and Replaced by DIN EN ISO 18452, Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe profilometer
  • DIN EN 12290, Withdrawn and Replaced by DIN EN ISO 14544, Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties
  • DIN EN 12291, Withdrawn and Replaced by DIN EN ISO 14544, Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of compression properties
  • DIN EN 15156, Withdrawn and Replaced by DIN EN ISO 17140, Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude
  • DIN EN 658-2, Withdrawn and Replaced by DIN EN ISO 20504, Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 2: Determination of compression properties
  • ISO 14705, 3rd Edition, Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature
  • ISO 19603, 1st Edition, Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus and bending strength of thick ceramic coatings
  • ISO 22197-1, 2nd Edition, Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 1: Removal of nitric oxide


For more standards like these, please refer to our Document Center List of Standards on Advanced Ceramics.

Thursday, January 12, 2017

New Products of the Chemical Industry Standards for the 4th Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Other Products of the Chemical Industry are now available;


  • ASTM C611, 1998 Edition Reapproved in 2016, Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature
  • ASTM D3207, 1992 Edition Reapproved in 2016, Standard Test Method for Detergent Resistance of Floor Polish Films
  • ASTM D3210, 1995 Edition Reapproved in 2016, Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes
  • ASTM D3430, 1995 Edition Reapproved in 2016, Standard Test Method for Clarity and Yellowness of Liquid Water-Based Clear Floor Polishes
  • ASTM D3543, 1993 Edition Reapproved in 2016, Standard Test Method for Metal Glide Adhesion
  • ASTM D3757, 2016 Edition, Standard Guide for Preparing Specifications for Solvent-based Floor Polishes
  • ASTM D4386, 1995 Edition Reapproved in 2016, Standard Practice for Application of Floor Polishes to Maintain Multilayer Composite Tile or Flooring
  • ASTM D4955, 1989 Edition Reapproved in 2016, Standard Practice for Field Evaluation of Automotive Polish
  • ASTM D5678, 1995 Edition Reapproved in 2016, Standard Test Method for Freeze/Thaw Resistance of Wax Emulsion Floor Polish
  • ASTM D7817, 2012 Edition Reapproved in 2016, Standard Test Method for Enumeration of Yeast and Mold in Raceway Brine, Brine-Cured Hides and Skins


For more standards like these, please refer to our Document Center List of Standards on Other Products of the Chemical Industry.

Wednesday, January 11, 2017

New Solar Energy Engineering Standards for the 4th Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Solar Energy Engineering are now available;


  • ASTM C1549, 2016 Edition, Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
  • ASTM E948, 2016 Edition, Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
  • ASTM E1125, 2016 Edition, Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
  • BS EN 62788-1-5, 2016 Edition, Measurement procedures for materials used in photovoltaic modules. Encapsulants. Measurement of change in linear dimensions of sheet encapsulation material resulting from applied thermal conditions
  • BS EN ISO 22975-1, 2016 Edition, Solar energy. Collector components and materials. Evacuated tubes. Durability and performance
  • BS EN ISO 22975-2, 2016 Edition, Solar energy. Collector components and materials. Heat-pipes for solar thermal application. Durability and performance
  • BS IEC 62548, 2016 Edition, Photovoltaic (PV) arrays. Design requirements
  • BS IEC 62894, 2014 Edition with Amendment 1, Photovoltaic inverters. Data sheet and name plate
  • IEC 61215-1-2, Edition 1.0, Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules
  • IEC 61215-1-3, Edition 1.0, Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
  • IEC 61215-1-4, Edition 1.0, Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testing of thin-film Cu(In,GA)(S,Se)2 based photovoltaic (PV) modules
  • IEC 61724-2, Edition 1.0, Photovoltaic system performance - Part 2: Capacity evaluation method
  • IEC 61836, Edition 3.0, Solar photovoltaic energy systems - Terms, definitions and symbols
  • IEC 62257-9-2, Edition 2.0, Recommendations for renewable energy and hybrid systems for rural electrification - Part 9-2: Integrated systems - Microgrids
  • IEC 62257-9-3, Edition 2.0, Recommendations for renewable energy and hybrid systems for rural electrification - Part 9-3: Integrated systems - User interface
  • IEC 62257-9-4, Edition 2.0, Recommendations for renewable energy and hybrid systems for rural electrification - Part 9-4: Integrated systems - User installation
  • IEC 62548, Edition 1.0, Photovoltaic (PV) arrays - Design requirements
  • IEC 62894-AM1, Amendment 1 for Edition 1.0, Photovoltaic inverters - Data sheet and name plate
  • IEC 62925, Edition 1.0, Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability
  • ISO 22975-1, 1st Edition, Solar energy - Collector components and materials - Part 1: Evacuated tubes - Durability and performance
  • ISO 22975-2, 1st Edition, Solar energy - Collector components and materials - Part 2: Heat-pipes for solar thermal application - Durability and performance


For more standards like these, please refer to our Document Center List of Standards on Solar Energy Engineering.

Tuesday, January 10, 2017

New Vibrations, Shock, and Vibration Measurements Standards for the 4th Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Vibration, Shock, and Vibration Measurements are now available;


  • BS 7853, Withdrawn and Replaced by BS ISO 8608, Mechanical vibration. Road surface profiles. Reporting of measured data
  • BS EN 30326-1, Withdrawn and Replaced by BS EN ISO 10326-1, Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Basic requirements
  • BS EN ISO 10326-1, 2016 Edition, Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Basic requirements
  • BS ISO 5344, 2004 Edition with Amendment 1, Electrodynamic vibration generating systems. Performance characteristics
  • BS ISO 8608, 2016 Edition, Mechanical vibration. Road surface profiles. Reporting of measured data
  • BS ISO 10816-1, Withdrawn and Replaced by BS ISO 20816-1, Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. General guidelines
  • BS ISO 20283-5, 2016 Edition, Mechanical vibration. Measurement of vibration on ships. Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships
  • BS ISO 20816-1, 2016 Edition, Mechanical vibration. Measurement and evaluation of machine vibration. General guidelines
  • ISO 5344-AM1, Amendment 1 for the 2nd Edition, Electrodynamic vibration generating systems -- Performance characteristics
  • ISO 8608, 2nd Edition, Mechanical vibration - Road surface profiles - Reporting of measured data
  • ISO 8626-AM1, Amendment 1 for the 1st Edition, Servo-hydraulic test equipment for generating vibration - Method of describing characteristics
  • ISO 15261-AM1, Amendment1 for the 1st Edition, Vibration and shock generating systems - Vocabulary
  • ISO 20283-5, 1st Edition, Mechanical vibration - Measurement of vibration on ships - Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships
  • ISO 20816-1, 1st Edition, Mechanical vibration - Measurement and evaluation of machine vibration - Part 1: General guidelines


Monday, January 9, 2017

New Electrical and Electronic Testing Standards for the 4th Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Electrical and Electronic Testing are now available;


  • BS EN 50270, Corrigendum 1 for the 2015 Edition, Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
  • BS EN 61010-2-012, 2016 Edition, Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for climatic and environmental testing and other temperature conditioning equipment
  • BS EN 61180, 2016 Edition, High-voltage test techniques for low-voltage equipment. Definitions, test and procedure requirements, test equipment
  • BS EN 61180-1, Withdrawn and Replaced by BS EN 61180, High-voltage test techniques for low-voltage equipment. Definitions, test and procedure requirements
  • BS EN 61180-2, Withdrawn and Replaced by BS EN 61180, High-voltage test techniques for low-voltage equipment. Test equipment
  • IEC 61010-1-AM1, Edition 3.0 Amendment, Amendment 1 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
  • IEC 61010-2-120, Edition 1.0, Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-120: Particular safety requirements for machinery aspects of equipment


For more standards like these, please refer to our Document Center List of Standards on Electrical and Electronic Testing.

Friday, January 6, 2017

New Geotextiles Standards for the 4th Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Geotextiles are now available;


  • ASTM-D5641, 2016 Edition, Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber
  • ASTM D6767, 2016 Edition, Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test
  • BS EN 13249, 2016 Edition, Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test
  • BS EN 13250, 2016 Edition, Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways
  • BS EN 13251, 2016 Edition, Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
  • BS EN 13252, 2016 Edition, Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
  • BS EN 13253, 2016 Edition, Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
  • BS EN 13254, 2016 Edition, Geotextiles and geotextile-related products. Characteristics required for use in the construction of reservoirs and dams
  • BS EN 13255, 2016 Edition, Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
  • BS EN 13256, 2016 Edition, Geotextiles and geotextile-related products. Characteristics required for use in the construction of tunnels and underground structures
  • BS EN 13257, 2016 Edition, Geotextiles and geotextile-related products. Characteristics required for use in solid waste disposals
  • BS EN 13265, 2016 Edition, Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects


For more standards like these, please refer to our Document Center List of Standards on Geotextiles.

Thursday, January 5, 2017

New Concrete And Concrete Products Standards for the 4th Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Concrete and Concrete Products are now available;


  • ASTM C33, 2016 Edition with Editorial Correction, Standard Specification for Concrete Aggregates
  • ASTM C42, 2016 Edition, Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
  • ASTM C939, 2016A Edition, Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
  • ASTM C1077, 2016A Edition, Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
  • ASTM C1105, 2008A Edition Reapproved in 2016, Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
  • ASTM C1723, 2016 Edition, Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
  • ASTM D994, 2011 Edition Reapproved in 2016, Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)
  • ASTM D7174, 2005 Edition Reapproved in 2016, Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
  • BS 1881-211, 2016 Edition, Testing concrete. Procedure and terminology for the petrographic examination of hardened concrete
  • BS EN 206, 2013 Edition with Amendment 1, Concrete. Specification, performance, production and conformity
  • BS EN 12602, 2016 Edition, Prefabricated reinforced components of autoclaved aerated concrete
  • ISO 1920-2, 2nd Edition, Testing of concrete - Part 2: Properties of fresh concrete
  • ISO 19044, 1st Edition, Test methods for fibre-reinforced cementitious composites - Load-displacement curve using notched specimen


For more standards like these, please refer to our Document Center List of Standards on Concrete and Concrete Products.

Wednesday, January 4, 2017

New Petroleum Products Standards for the 4th Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Petroleum Products are now available;


  • ASTM D92, 2016A Edition, Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
  • ASTM D93, 2016A Edition, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
  • ASTM D2503, 1992 Edition Reapproved in 2016, Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D2597, Withdrawn Without Replacement, Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography
  • ASTM D2786, 1991 Edition Reapproved in 2016, Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry
  • ASTM D2887, 2016A Edition, Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
  • ASTM D3239, 1991 Edition Reapproved in 2016, Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry
  • ASTM D4175, 2016C Edition, Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
  • ASTM D4177, 2016 Edition, Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
  • ASTM D5291, 2016 Edition, Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
  • ASTM D6304, 2016 Edition with Editorial Correction, Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
  • ASTM D6378, 2010 Edition Reapproved in 2016, Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
  • ASTM D6450, 2016A Edition, Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
  • ASTM D6809, 2002 Edition Reapproved in 2016, Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
  • ASTM D7171, 2016 Edition, Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
  • BS EN ISO 3924, 2016 Edition, Petroleum products. Determination of boiling range distribution. Gas chromatography method
  • ISO 19686-100, 1st Edition, Petroleum products - Equivalency of test method determining the same property - Part 100: Background and principle of the comparison and the evaluation of equivalency


For more standards like these, please refer to our Document Center List of Standards on Petroleum Products in General.

Tuesday, January 3, 2017

New Ground Service And Maintenance Equipment Standards for the 4th Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Ground Service and Maintenance Equipment are now available;


  • BS 2C-12, Withdrawn and Replaced by BS ISO 43, Specification for jacking pads for aircraft
  • BS ISO 43, 2016 Edition, Aircraft. Jacking pads
  • BS ISO 7718-1, 2016 Edition, Aircraft. Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle. Main deck doors
  • BS ISO 7718-2, 2016 Edition, Aircraft. Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle. Upper deck doors
  • BS ISO 23748, 2016 Edition, Aerospace series. O-ring grooves. Dimensions
  • ISO/PAS-15594, Withdrawn Without Replacement, Airport hydrogen fuelling facility operations
  • ISO 43, 2nd Edition, Aircraft - Jacking pads
  • ISO 7718-1, 2nd Edition, Aircraft - Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle - Part 1: Main deck doors
  • ISO 7718-2, 2nd Edition, Aircraft - Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle - Part 2: Upper deck doors
  • ISO 23748, 1st Edition, Aerospace series - O-ring grooves - Dimensions


For more standards like these, please refer to our Document Center List of Standards on Ground Service and Maintenance Equipment.