Monday, July 31, 2017

New Plastics Standards for the 2nd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Plastics is now available:

  • ASTM D2990, 2017 Edition, Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
  • ASTM D732, 2017 Edition, Standard Test Method for Shear Strength of Plastics by Punch Tool
  • ASTM D7774, 2017 Edition Standard Test Method for Flexural Fatigue Properties of Plastics
  • ASTM D7791, 2017 Edition, Standard Test Method for Uniaxial Fatigue Properties of Plastics
  • ASTM E2050, 2017 Edition, Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion
  • BS ISO 19929, 2017 Edition, Plastics. Determination of average molecular mass and mixture ratio of poly(ethylene glycol) and its derivatives by MALDI-TOF-MS
  • BS ISO 9370, 2017 Edition, Plastics. Instrumental determination of radiant exposure in weathering tests. General guidance and basic test method
  • DIN EN ISO 15512, 2017 Edition, Plastics - Determination of water content
  • ISO 5659-2, 4th Edition, Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test
  • ISO 9370, 3rd Edition, Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method
  • ASTM D6272, 2017 Edition, Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
  • BS EN ISO 4589-1, 2017 Edition, Plastics. Determination of burning behaviour by oxygen index. General requirements
  • BS EN ISO 4589-2, 2017 Edition, Plastics. Determination of burning behaviour by oxygen index. Ambient-temperature test
  • BS EN ISO 4589-3, 2017 Edition, Plastics. Determination of burning behaviour by oxygen index. Elevated-temperature test
  • ISO 4589-1, 2nd Edition, Plastics - Determination of burning behaviour by oxygen index - Part 1: General requirements
  • ISO 4589-2, 2nd Edition, Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test
  • ISO 4589-3, 2nd Edition, Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test  
  • ASTM D4142, 1989 Edition Reapproved in 2017, Standard Guide for Testing Epoxy Resins
  • ASTM D4217, 2007 Edition Reapproved in 2017, Standard Test Method for Gel Time of Thermosetting Coating Powder
  • ASTM D4242, 2007 Edition Reapproved in 2017, Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders
  • ASTM D4640, 1986 Edition, Reapproved in 2017, Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
  • ASTM D2561, 2017 Edition, Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers
  • ASTM D7436, 2017 Edition, Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
  • BS EN ISO 15023-1, 2017 Edition, Plastics. Poly(vinyl alcohol) (PVAL) materials. Designation system and basis for specifications
  • BS EN ISO 20028-1, 2017 Edition, Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Designation system and basis for specifications
  • BS EN ISO 20028-2, 2017 Edition, Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Preparation of test specimens and determination of properties
  • BS EN ISO 25137-2, 2009 Edition with Corrigendum 1 (C1), Plastics. Sulfone polymer moulding and extrusion materials. Preparation of test specimens and determination of properties
  • BS EN ISO 7792-1, Withdrawn and replaced by BS EN ISO 20028-1, Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Designation system and basis for specifications
  • BS EN ISO 7792-2, Withdrawn and replaced by BS EN ISO 20028-2, Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Preparation of test specimens and determination of properties
  • ISO 20568-1, 1st Edition, Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications
  • ISO 20568-2, 1st Edition, Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
  • ISO 294-1, 2nd Edition, Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens
  • ASTM F1698, 2002 Edition Reapproved in 2015 with an Editorial Correction (E1), Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits  


For more standards like these, please refer to our Document Center List of Standards on Plastics.
                  

Friday, July 28, 2017

New Fuels Standards for the 2nd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Fuels are now available:

  • ASTM D4239, 2017 Edition, Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
  • ASTM D5056, 2017 Edition, Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
  • ASTM D5600, 2017 Edition, Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
  • BS EN 14778, Withdrawn and replaced by BS EN ISO 18135, Solid biofuels. Sampling
  • ASTM D2068, 2017 Edition, Standard Test Method for Determining Filter Blocking Tendency
  • ASTM D2699, 2016 Edition with Editorial Correction (E1), Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
  • ASTM D3237, 2017 Edition, Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
  • ASTM D3605, 2017 Edition, Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
  • ASTM D3701, 2017 Edition, Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry
  • ASTM D4418, 2017 Edition, Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
  • ASTM D4808, 2017 Edition, Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy
  • ASTM D4814, 2017 Edition, Standard Specification for Automotive Spark-Ignition Engine Fuel
  • ASTM D5599, 2017 Edition, Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
  • ASTM D5622, 2017 Edition, Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
  • ASTM D5771, 2017 Edition, Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)
  • ASTM D5773, 2017 Edition, Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
  • ASTM D613, 2017B Edition, Standard Test Method for Cetane Number of Diesel Fuel Oil
  • ASTM D6227, 2017 Edition, Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
  • ASTM D6258, 2017 Edition, Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
  • ASTM D6371, 2017 Edition, Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
  • ASTM D7422, 2017 Edition, Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
  • ASTM D7687, 2017 Edition, Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
  • ASTM D7689, 2017 Edition, Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Mini Method)
  • ASTM D7797, 2017 Edition, Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy - Rapid Screening Method
  • ASTM D7826, 2017 Edition, Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
  • ASTM D7923, 2017A Edition, Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
  • ASTM D910, 2017 Edition, Standard Specification for Leaded Aviation Gasolines
  • ASTM D975, 2017 Edition, Standard Specification for Diesel Fuel Oils
  • BS EN 16942, 2016 Edition, Fuels. Identification of vehicle compatibility. Graphical expression for consumer information
  • DIN 51603-1, 2017 Edition, Liquid fuels - Fuel oils - Part 1: Fuel oils EL, minimum requirements
  • DIN 51603-3, 2017 Edition, Liquid fuels - Fuel oils - Part 3: Fuel oil S, Minimum requirements
  • DIN 51603-5, 2017 Edition, Liquid fuels - Fuel oils - Part 5: Fuel oils SA, Minimum requirements
  • UNE EN 16896, 2017 Edition, Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter
  • ASTM D1070, 2003 Edition reapproved in 2017, Standard Test Methods for Relative Density of Gaseous Fuels
  • ASTM D1071, 2017 Edition, Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
  • ASTM D3588, 1998 Edition reapproved in 2017, Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
  • ASTM D1826, 1994 Edition reapproved in 2017, Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
  • BS EN ISO 18135, 2017 Edition, Solid Biofuels. Sampling
  • ISO 14780, 1st Edition, Solid biofuels - Sample preparation
  • ISO 18125, 1st Edition, Solid biofuels - Determination of calorific value
  • ISO 18135, 1st Edition, Solid Biofuels - Sampling
  • ISO 19743, 1st Edition, Solid biofuels - Determination of content of heavy extraneous materials larger than 3,15 mm
 
For more standards like these, please refer to our Document Center List of Standards on Fuels

Thursday, July 27, 2017

New Thermal Insulation Of Buildings Standards for the 2nd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Thermal Insulation Of Buildings are now available:

  • PD CEN 15316-6-1, 2017 Editio, Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Explanation and justification of EN 15316-1, Module M3-1, M3-4, M3-9, M8-1, M8-4
  • ASTM C1373, 2011 Edition reapproved in 2017, Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
  • ASTM C687, 2017 Edition, Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
  • BS EN 15193-1, 2017 Edition, Energy performance of buildings. Energy requirements for lighting. Specifications, Module M9
  • BS EN 16783, 2017 Edition, Thermal insulation products. Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations
  • BS EN 16947-1, 2017 Edition, Energy Performance of Buildings. Building Management System. Module M10-12
  • ISO 10077-1, 3rd Edition, Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General
  • ISO 10211, 2nd Edition, Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
  • ISO 13370, 3rd Edition, Thermal performance of buildings - Heat transfer via the ground - Calculation methods
  • ISO 13789, 3rd Edition, Thermal performance of buildings - Transmission and ventilation heat transfer coefficients - Calculation method
  • ISO 14683, 3rd Edition, Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values
  • ISO 17772-1, 1st Edition, Energy performance of buildings - Indoor environmental quality - Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings
  • ISO 52000-1, 1st Edition, Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures
  • ISO 52000-2, 1st Edition, Energy performance of buildings - Overarching EPB assessment - Part 2: Explanation and justification of ISO 52000-1
  • ISO 52003-1, 1st Edition, Energy performance of buildings - Indicators, requirements, ratings and certificates - Part 1: General aspects and application to the overall energy performance
  • ISO 52003-2, 1st Edition, Energy performance of buildings - Indicators, requirements, ratings and certificates - Part 2: Explanation and justification of ISO 52003-1
  • ISO 52010-1, 1st Edition, Energy performance of buildings - External climatic conditions - Part 1: Conversion of climatic data for energy calculations
  • ISO 52010-2, 1st Edition, Energy performance of buildings - External climatic conditions - Part 2: Explanation and justification of ISO 52010-1
  • ISO 52016-1, 1st Edition, Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 1: Calculation procedures
  • ISO 52016-2, 1st Edition, Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 2: Explanation and justification of ISO 52016-1 and ISO 52017-1
  • ISO 52017-1, 1st Edition, Energy performance of buildings - Sensible and latent heat loads and internal temperatures - Part 1: Generic calculation procedures
  • ISO 52018-1, 1st Edition, Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 1: Overview of options
  • ISO 52018-2, 1st Edition, Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 2: Explanation and justification of ISO 52018-1
  • ISO 52019-2, 1st Edition, Energy performance of buildings - Hygrothermal performance of building components and building elements - Part 2: Explanation and justification
  • ISO 52022-1, 1st Edition, Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection devices combined with glazin
  • ISO 52022-2, 1st Edition, Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 2: Explanation and justification
  • ISO 52022-3, 1st Edition, Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 3: Detailed calculation method of the solar and daylight characteristics for solar protection devices combined with glazing
  • PD CEN 12831-4, 2017 Edition, Energy performance of buildings. Method for calculation of the design heat load. Explanation and justification of EN 12831-3, Module M8-2, M8-3
  • PD CEN 15193-2, 2017 Edition, Energy performance of buildings. Energy requirements for lighting. Explanation and justification of EN 15193-1, Module M9
  • PD CEN 15316-6-10, 2017 Edition, Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Explanation and justification of EN 15316-5, Module M3-7, M8-7
  • PD CEN 15316-6-5, 2017 Edition, Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Explanation and justification of EN 15316-4-2, Module M3-8
  • PD CEN 15378-2, 2017 Edition, Energy performance of buildings. Heating systems and DHW in buildings. Explanation and justification of EN 15378-1, Module M3-11 and M8-11
  • BS ISO 19467, 2017 Edition, Thermal performance of windows and doors. Determination of solar heat gain coefficient using solar simulator
  • ISO 10077-2, 3rd Edition, Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames
  • ISO 13786, 3rd Edition, Thermal performance of building components - Dynamic thermal characteristics - Calculation methods
  • ISO 19467, 1st Edition, Thermal performance of windows and doors - Determination of solar heat gain coefficient using solar simulator
  • ISO 6946, 3rd Edition, Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods
  • PD CEN 15316-6-7, 2017 Edition, Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Explanation and justification of EN 15316-4-4, Module M8-3-4, M8-8-4, M8-11-4
  • UNE 92181, 2017 Edition, Minimum advisable characteristics for different applications. Thermal insulation products for buildings. Factory made expanded polystyrene products (EPS).
  • ASTM-C919, 2012 Edition reapproved in 2017, Standard Practice for Use of Sealants in Acoustical Applications
  • ASTM E1477, 1998A Edition reapproved in 2017, Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
  • ISO 3010, 3rd Edition, Bases for design of structures - Seismic actions on structures
  • ASTM D5683, 1995 Edition reapproved in 2017, Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes
  • IEC 62561-3, Edition 2.0, Lightning protection system components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG)   

For more standards like these, please refer to our Document Center List of Standards on Thermal Insulation Of Buildings.                          

Wednesday, July 26, 2017

New Transport Of Dangerous Goods Standards for the 2nd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Transport Of Dangerous Goods are now available:

  • BS ISO 24102-1, 2013 Edition with Amendment 1 (A1), Intelligent transport systems. Communications access for land mobiles (CALM). ITS station management. Local management
  • BS ISO 24102-3, 2013 Edition with Amendment 1 (A1), Intelligent transport systems. Communications access for land mobiles (CALM). ITS station management. Service access points
  • BS ISO 24102-4, 2013 Edition with Amendment 1 (A1), Intelligent transport systems. Communications access for land mobiles (CALM). ITS station management. Station-internal management communications    
  • BS ISO 24102-5, 2013 Edition with Amendment 1 (A1), Intelligent transport systems. Communications access for land mobiles (CALM). ITS station management. Fast service advertisement protocol (FSAP) 
  • ISO 17429, 1st Edition, Intelligent transport systems - Cooperative ITS - ITS station facilities for the transfer of information between ITS stations
  • ISO 21219-22, 1st Edition, Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) - Part 22: OpenLR location referencing (TPEG2-OLR)
  • ISO 21219-7, 1st Edition, Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) - Part 7: Location referencing container (TPEG2-LRC)
  • ISO 24102-1, 1st Edition, Intelligent transport systems - Communications access for land mobiles (CALM) - ITS station management - Part 1: Local management
  • ISO 24102-1-AM1, 1st Edition with Amendment 1 (A1), AMENDMENT 1, Part 1: Local management - Intelligent transport systems - Communications access for land mobiles (CALM) - ITS station management    
  • ISO 24102-3, 1st Edition, Intelligent transport systems - Communications access for land mobiles (CALM) - ITS station management - Part 3: Service access points
  • ISO 24102-3-AM1, 1st Edition with Amendment 1 (A1), AMENDMENT 1, Part 3: Service access points - Intelligent transport systems - Communications access for land mobiles (CALM) - ITS station management
  • ISO 24102-4, 1st Edition, Intelligent transport systems - Communications access for land mobiles (CALM) - ITS station management - Part 4: Station-internal management communications
  • ISO 24102-4-AM1, 1st Edition with Amendment 1 (A1), Amendment 1, Part 4: Station-internal management communications, Intelligent transport systems - Communications access for land mobiles (CALM) - ITS station management  
  • ISO 24102-5, 1st Edition, Intelligent transport systems - Communications access for land mobiles (CALM) - ITS station management - Part 5: Fast service advertisement protocol (FSAP)
  • ISO 24102-5-AM1, 1st Edition with Amendment 1 (A1), AMENDMENT 1, Part 5: Fast service advertisement protocol (FSAP) - Intelligent transport systems - Communications access for land mobiels (CALM) - ITS station management  
  • ISO 29281-1, 1st Edition, Intelligent transport systems - Communication access for land mobiles (CALM) - Non-IP networking - Part 1: Fast networking & transport layer protocol (FNTP)
  • ISO 29281-1-AM1, 1st Edition with Amendment 1 (A1), AMENDMENT 1, Part 1: Fast networking & transport layer protocol (FNTP) - Intelligent transport systems - Communication access for land mobiles (CALM) - Non-IP networking 
  • DD CEN ISO 17574, Withdrawn and replaced by PD CEN ISO 17574, Electronic fee collection. Guidelines for security protection profiles
  • ISO 12813, 1st Edition, Electronic fee collection - Compliance check communication for autonomous systems
  • ISO 12813-AM1, 1st Edition with Amendment 1 (A1), AMENDMENT 1, Electronic fee collection - Compliance check communication for autonomous systems    
  • ISO 13111-1, 1st Edition, Intelligent transport systems (ITS) - The use of personal ITS station to support ITS service provision for travellers - Part 1: General information and use case definitions
  • ISO 13141, 1st Edition, Electronic fee collection - Localisation augmentation communication for autonomous systems
  • ISO 13141-AM1, 1st Edition with Amendment 1 (A1), AMENDMENT 1, Electronic fee collection - Localization augmentation communication for autonomous systems
  • ISO 15638-10, 1st Edition, Intelligent transport systems - Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) - Part 10: Emergency messaging system/eCall
  • ISO 15638-18, 1st Edition, Intelligent transport systems - Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) - Part 18: ADR (Dangerous Goods)
  • ISO 17361, 2nd Edition, Intelligent transport systems - Lane departure warning systems - Performance requirements and test procedures
  • ISO 20026, 1st Edition, Intelligent transport systems - Cooperative ITS - Test architecture
  • PAS 1018 MANDARIN, 2017 Edition, Indirect, temperature-controlled refrigerated delivery services. Land transport of refrigerated parcels with intermediate transfer. Specification (Mandarin edition)
  • PD CEN ISO 17574, 2017 Edition, Electronic fee collection. Guidelines for security protection profiles
  • PAS 1018 CANTONESE, 2017 Edition, Indirect, temperature-controlled refrigerated delivery services. Land transport of refrigerated parcels with intermediate transfer. Specification (Cantonese edition)
  • PAS 301, 2017 Edition, Civilian armoured vehicle. Automotive test methods

For more standards like these, please refer to our Document Center List of Standards on Transport Of Dangerous Goods.          

Tuesday, July 25, 2017

New Microbiology Standards for the 2nd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Microbiology are now available:

  • ASTM E2180, 2007 Edition reapproved in 2017, Standard Test Method for Determining the Activity of Incorporated Antimicrobial Agent(s) In Polymeric or Hydrophobic Materials
  • ASTM E2196, 2017 Edition, Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown with Medium Shear and Continuous Flow Using Rotating Disk Reactor
  • ASTM E2562, 2017 Edition, Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown with High Shear and Continuous Flow using CDC Biofilm Reactor
  • ASTM E2799, 2017 Edition, Standard Test Method for Testing Disinfectant Efficacy against Pseudomonas aeruginosa Biofilm using the MBEC Assay
  • SS EN ISO 18153, 2004 Edition, In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003)
  • BS EN ISO 11731, 2017 Edition, Water quality. Enumeration of Legionella
  • BS EN ISO 11731-2, Withdrawn and replaced by BS EN ISO 11731, Water quality. Detection and enumeration of Legionella. Direct membrane filtration method for waters with low bacterial counts 
  • ISO 11731, 2nd Edition, Water quality - Enumeration of Legionella
  • BS EN ISO 10273, 2017 Edition, Microbiology of the food chain. Horizontal method for the detection of pathogenic Yersinia enterocolitica
  • BS EN ISO 15216-1, 2017 Edition, Microbiology of the food chain. Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR. Method for quantification
  • BS EN ISO 22964, 2017 Edition, Microbiology of the food chain. Horizontal method for the detection of Cronobacter spp.
  • BS EN ISO 6887-1, 2017 Edition, Microbiology of the food chain. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. General rules for the preparation of the initial suspension and decimal dilutions
  • BS EN ISO 6887-2, 2017 Edition, Microbiology of the food chain. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. Specific rules for the preparation of meat and meat products
  • BS EN ISO 6887-3, 2017 Edition, Microbiology of the food chain. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. Specific rules for the preparation of fish and fishery products
  • BS EN ISO 6887-4, 2017 Edition, Microbiology of the food chain. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. Specific rules for the preparation of miscellaneous products
  • ISO 10273, 3rd Edition, Microbiology of the food chain - Horizontal method for the detection of pathogenic Yersinia enterocolitica
  • ISO 11290-1, 2nd Edition, Microbiology of the food chain - Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. - Part 1: Detection method
  • ISO 11290-2, 2nd Edition, Microbiology of the food chain - Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. - Part 2: Enumeration method
  • ISO 16654, 1st Edition, Microbiology of food and animal feeding stuffs -- Horizontal method for the detection of Escherichia coli O157
  • ISO 16654-AM1, 1st Edition with Amendment 1, Amendment 1: Annex B: Result of interlaboratory studies, Microbiology of food and animal feeding stuffs -- Horizontal method for the detection of Escherichia coli O157
  • ISO 19020, 1st Edition, Microbiology of the food chain - Horizontal method for the immunoenzymatic detection of staphylococcal enterotoxins in foodstuffs
  • ISO 21528-1, 2nd Edition, Microbiology of the food chain - Horizontal method for the detection and enumeration of Enterobacteriaceae - Part 1: Detection of Enterobacteriaceae
  • ISO 21528-2, 2nd Edition, Microbiology of the food chain - Horizontal method for the detection and enumeration of Enterobacteriaceae - Part 2: Colony-count technique
  • PD CEN ISO 15216-1, Withdrawn and replaced by PD CEN ISO 15216-1, Microbiology of food and animal feed. Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR. Method for quantification
  • UNE EN ISO 15216-1, 2017 Edition, Microbiology of the food chain - Technical requirements and guidance on establishment or revision of a standardized reference method
  • ISO 22964, 1st Edition, Microbiology of the food chain - Horizontal method for the detection of Cronobacter spp.
  • BS EN ISO 29621, 2017 Edition, Cosmetics. Microbiology. Guidelines for the risk assessment and identification of microbiologically low-risk products
  • ISO 16212, 2nd Edition, Cosmetics - Microbiology - Enumeration of yeast and mould
  • ASTM D7391, 2017 Edition with Editorial Correction (E1), Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy    
  • ASTM E2897, 2012 Edition reapproved in 2017, Standard Guide for Evaluation of the Effectiveness of Hand Hygiene Topical Antimicrobial Products using ex vivo Porcine Skin
  • ISO 18415, 2nd Edition, Cosmetics - Microbiology - Detection of specified and non-specified microorganisms
  • ISO 21148, 2nd Edition, Cosmetics - Microbiology - General instructions for microbiological examination
  • ISO 21149, 2nd Edition, Cosmetics - Microbiology - Enumeration and detection of aerobic mesophilic bacteria
 
For more standards like these, please refer to our Document Center List of Standards on Microbioloigy.                    

Monday, July 24, 2017

New Vocabulary Standards for the 2nd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Vocabulary are now available:

  • BS ISO 5127, 2017 Edition, Information and documentation. Foundation and vocabulary
  • IEC 62656-5, Edition 1.0, Standardized product ontology register and transfer by spreadsheets - Part 5: Interface for activity description
  • ISO 5127, 2nd Edition, Information and documentation - Foundation and vocabulary
  • BS ISO 19731, 2017 Edition, Digital analytics and web analyses for purposes of market, opinion and social research. Vocabulary and service requirements
  • ISO 19731, 1st Edition, Digital analytics and web analyses for purposes of market, opinion and social research - Vocabulary and service requirements
  • ISO 41011, 1st Edition, Facility management - Vocabulary
  • ISO 18401,1st Edition, Nanotechnologies - Plain language explanation of selected terms from the ISO/IEC 80004 series
  • ISO 80004-11, 1st Edition, Nanotechnologies - Vocabulary - Part 11: Nanolayer, nanocoating, nanofilm, and related terms
  • DIN EN ISO 9999, 2017 Edition, Assistive products for persons with disability - Classification and terminology
  • DIN EN 374-1, Withdrawn and replaced by DIN EN ISO 374-1, Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements
  • ASTM E170, 2017 Edition, Standard Terminology Relating to Radiation Measurements and Dosimetry 
  • BS ISO 18405, 2017 Edition, Underwater acoustics. Terminology
  • ISO 18405, 1st Edition, Underwater acoustics - Terminology
  • ASTM E6, 2015 Edition with an Editorial Correction, Standard Terminology Relating to Methods of Mechanical Testing
  • BS EN 1330-8, Withdrawn and replaced by BS EN ISO 20484, Non-destructive testing. Terminology. Terms used in leak tightness testing
  • BS EN ISO 20484, 2017 Edition, Non-destructive testing. Leak testing. Vocabulary
  • ASTM F1789, 2017 Edition, Standard Terminology for F16 Mechanical Fasteners\
  • ISO 21940-2, 1st Edition, Mechanical vibration - Rotor balancing - Part 2: Vocabulary
  • ISO 4378-1, 4th Edition, Plain bearings - Terms, definitions, classification and symbols - Part 1: Design, bearing materials and their properties
  • ISO 4378-2, 3rd Edition, Plain bearings - Terms, definitions, classification and symbols - Part 2: Friction and wear
  • ISO 4378-3, 3rd Edition, Plain bearings - Terms, definitions, classification and symbols - Part 3: Lubrication
  • ASTM C286, 1999 Edition Reapproved in 2017, Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems
  • BS EN 15826, Withdrawn and replaced by BS EN ISO 19496-1, Vitreous and porcelain enamels. Terminology
  • BS EN ISO/ASTM 52900, 2017 Edition, Additive manufacturing. General principles. Terminology
  • BS EN ISO 19496-1, 2017 Edition, Vitreous and porcelain enamels. Terminology. Terms and definitions
  • BS EN ISO 19496-2, 2017 Edition, Vitreous and porcelain enamels. Terminology. Visual representations and descriptions
  • ASTM D2864, 2017A Edition, Standard Terminology Relating to Electrical Insulating Liquids and Gases
  • ASTM F149, Withdrawn with no replacement, Standard Terminology Relating to Optical Character Recognition
  • ASTM F335, Withdrawn with no replacement, Standard Terminology Relating to Electrostatic Copying
  • ASTM F3200, 2017 Edition, Standard Terminology for Driverless Automatic Guided Industrial Vehicles
  • ASTM D123, 2017 Edition, Standard Terminology Relating to Textiles
  • UNE ISO 3918, 2017 Edition, Milking machine installations - Vocabulary
  • ASTM E253, 2017 Edtion, Standard Terminology Relating to Sensory Evaluation of Materials and Products
  • ASTM D6384, 2017 Edition, Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants
  • ASTM A902, 2017 Edition, Standard Terminology Relating to Metallic Coated Steel Products
  • BS ISO 6372, 2017 Edition, Nickel and nickel alloys. Terms and definitions
  • ISO 6372, 1st Edition, Nickel and nickel alloys - Terms and definitions
  • ISO 6372-1, Withdrawn as replaced by ISO 6372, Nickel and nickel alloys - Terms and definitions - Part 1: Materials
  • ISO 6372-2, Withdrawn as replaced by ISO 6372, Nickel and nickel alloys - Terms and definitions - Part 2: Refinery Products
  • ISO 6372-3, Withdrawn as replaced by ISO 6372, Nickel and nickel alloys - Terms and definitions - Part 3: Wrought Products & Castings
  • ASTM D7801, 2017 Edition, Standard Terminology for Paint Brush Application Tools
  • ASTM C896, 2017 Edition, Standard Terminology Relating to Clay Products
  • BS ISO 19720-1, 2017 Edition, Building construction machinery and equipment. Plants for the preparation of concrete and mortar. Terminology and commercial specifications
  • ISO 19720-1, 1st Edition, Building construction machinery and equipment - Plants for the preparation of concrete and mortar - Part 1: Terminology and commercial specifications
  • ASTM D8, 2017B Edition, Standard Terminology Relating to Materials for Roads and Pavements
  • ASTM E2135, 2010A Edition Reapproved in 2017, Standard Terminology for Property and Asset Management

For more standards like these, please refer to our Document Center List of Standards on Vocabulary.