Thursday, October 27, 2016

New Quality Standards for the 3rd Quarter 2016

Document Center Inc. is pleased to announce that the following New Standards on Quality are now available:


  • ASTM C1093, 2015a(e1) Edition (Editorially Corrected), Standard Practice for Accreditation of Testing Agencies for Masonry
  • ASTM D6300, 2016a Edition, Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
  • ASTM E178, 2016a Edition, Standard Practice for Dealing With Outlying Observations
  • DIN EN ISO 13485, 2016 Edition (English Language), Medical devices - Quality management systems - Requirements
  • IEC 61078, Edition 3.0, Reliability block diagrams
  • IEC 61703, Edition 2.0, Mathematical expressions for reliability, availability, maintainability and maintenance support terms
  • IEC 63039, Edition 1.0, Probablistic risk analysis of technological systems - Estimation of final event rate at a given initial state
  • ISO 16705, 1st Edition, Statistical methods for implementation of Six Sigma - Selected illustrations of contingency table analysis
  • ISO 22514-4, 2nd Edition, Statistical methods in process management - Capability and performance - Part 4: Process capability estimates and performance measures


For more standards like these, please see our Document Center List of Standards on Quality.

Tuesday, October 25, 2016

New Liquid Fuels Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Liquid Fuels are now available;


  • ASTM D93, 2016A Edition, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
  • ASTM D322, 1997 Edition Reapproved in 2012 with Editorial Correction, Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation
  • ASTM D613, 2016A Edition, Standard Test Method for Cetane Number of Diesel Fuel Oil 
  • ASTM D1318, 2016 Edition, Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)
  • ASTM D1655, 2016A Edition, Standard Specification for Aviation Turbine Fuels
  • ASTM D1796, 2011 Edition Reapproved in 2016, Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
  • ASTM D3241, 2016A Edition, Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
  • ASTM D3341, 2016 Edition, Standard Test Method for Lead in Gasoline - Iodine Monochloride Method
  • ASTM D3605, 2016 Edition, Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
  • ASTM D4717, 2016 Edition, Standard Specification for Fuel System Icing Inhibitors
  • ASTM D4737, 2010 Edition Reapproved in 2016, Standard Test Method for Calculated Cetane Index by Four Variable Equation
  • ASTM D4814, 2016D Edition, Standard Specification for Automotive Spark-Ignition Engine Fuel
  • ASTM D6974, 2016 Edition, Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels - Filtration and Culture Procedures
  • ASTM D7185, 2016 Edition, Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene
  • ASTM D7215, 2016 Edition, Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels
  • ASTM D7223, 2016A Edition, Standard Specification for Aviation Certification Turbine Fuel
  • ASTM D7236, 2016A Edition, Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
  • ASTM D7321, 2016A Edition, Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
  • ASTM D7462, Withdrawn Without Replacement, Standard Test Method for Oxidation Stability of Biodiesel (B100) and Blends of Biodiesel with Middle Distillate Petroleum Fuel (Accelerated Method)
  • ASTM D7566, 2016B Edition, Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
  • ASTM D7826, 2016 Edition, Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
  • BS 6380, 2012 Edition with Amendment 1, Guide to low temperature properties and cold weather use of diesel fuels and gas oils
  • BS EN 15940, 2016 Edition, Automotive fuels. Paraffinic diesel fuel from synthesis or hydrotreatment. Requirements and test methods
  • BS EN 16709, Corrigendum 1 for 2015 Edition, Automotive fuels. High FAME diesel fuel (B20 and B30). Requirements and test methods


For more standards like these, please refer to our Document Center List of Standards on Liquid Fuels.

Friday, October 21, 2016

New Heating Systems Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Heating Systems are now available;


  • BS EN 14037-1, 2016 Edition, Free hanging heating and cooling surfaces for water with a temperature below 120°C. Pre-fabricated ceiling mounted radiant panels for space heating. Technical specifications and requirements
  • BS EN 14037-2, 2016 Edition, Free hanging heating and cooling surfaces for water with a temperature below 120°C. Pre-fabricated ceiling mounted radiant panels for space heating. Test method for thermal output
  • BS EN 14037-3, 2016 Edition, Free hanging heating and cooling surfaces for water with a temperature below 120°. Prefabricated ceiling mounted radiant panels for space heating. Rating method and evaluation of radiant thermal output
  • BS EN 14037-4, 2016 Edition, Free hanging heating and cooling surfaces for water with a temperature below 120°C. Pre-fabricated ceiling mounted radiant panels. Test method for cooling capacity
  • BS EN 14037-5, 2016 Edition, Free hanging heating and cooling surfaces for water with a temperature below 120°C. Open or closed heated ceiling surfaces. Test method for thermal output
  • PD CEN 12098-6, 2016 Edition, Controls for heating systems. Accompanying TR prEN 12098-1:2015. Modules M3-5,6,7,8
  • PD CEN 12098-7, 2016 Edition, Controls for heating systems. Accompanying TR prEN 12098-3:2015. Modules M3-5,6,7,8
  • PD CEN 12098-8, 2016 Edition, Controls for heating systems. Accompanying TR prEN 12098-5:2015. Modules M3-5,6,7,8


For more standards like these, please refer to our Document Center List of Standards on Heating Systems.


Thursday, October 20, 2016

New Cement, Gypsum, Lime, and Mortar Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Cement, Gypsum, Lime, and Mortar are now available;


  • ASTM C110, 2015 Edition with Editorial Correction, Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
  • ASTM C150, 2016 Edition with Editorial Correction, Standard Specification for Portland Cement
  • ASTM C166, 2005 Edition Reapproved in 2016, Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
  • ASTM C471M, 2016A Edition, Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)
  • ASTM C476, 2016 Edition, Standard Specification for Grout for Masonry
  • ASTM C563, 2016 Edition, Standard Guide for Approximation of Optimum SO3 in Hydraulic Cement Using Compressive Strength
  • ASTM C926, 2016B Edition, Standard Specification for Application of Portland Cement-Based Plaster
  • ASTM C1063, 2016C Edition, Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
  • ASTM C1764, 2012 Edition Reapproved in 2016, Standard Test Methods for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications
  • BS EN 13914-2, 2016 Edition, Design, preparation and application of external rendering and internal plastering. Internal plastering


For more standards like these, please refer to our Document Center List of Standards on Cement, Gypsum, Lime, and Mortar.

Wednesday, October 19, 2016

New Electroacoustics Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Electroacoustics are now available;


  • BS EN 61094-3, 2016 Edition, Electroacoustics. Measurement microphones. Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique
  • BS EN 61094-5, 2016 Edition, Electroacoustics. Measurement microphones. Methods for pressure calibration of working standard microphones by comparison
  • IEC 62736, Edition 1.0, Ultrasonics - Pulse-echo scanners - Simple methods for periodic testing to verify stability of an imaging system's elementary performance
  • IEC 62886, Edition 1.0, Electroacoustics - Hearing aids - Method for measuring electroacoustic performance up to 16 kHz
  • PD IEC 62736, 2016 Edition, Ultrasonics. Pulse-echo scanners. Simple methods for periodic testing to verify stability of an imaging system’s elementary performance
  • PD IEC 62886, 2016 Edition, Electroacoustics. Hearing aids. Method for measuring electroacoustic performance up to 16 kHz


For more standards like these, please refer to our Document Center List of Standards on Electroacoustics.

Tuesday, October 18, 2016

New Leather and Furs Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Leather and Furs are now available;

  • ASTM D7477, 2016 Edition, Standard Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water
  • BS EN ISO 19076, 2016 Edition, Leather. Measurement of leather surface. Using electronic techniques
  • DIN EN ISO 2417, 2016 Edition, Leather - Physical and mechanical tests - Determination of the static absorption of water
  • DIN EN ISO 2589, 2016 Edition, Leather - Physical and mechanical tests - Determination of thickness
  • DIN EN ISO 3377-2, 2016 Edition, Leather - Physical and mechanical tests - Determination of tear load - Part 2: Double edge tear
  • DIN EN ISO 17229, 2016 Edition, Leather - Physical and mechanical tests - Determination of water vapour absorption
  • DIN EN ISO 17236, 2016 Edition, Leather - Physical and mechanical tests - Determination of extension set
  • ISO 19076, 1st Edition, Leather - Measurement of leather surface - Using electronic technique


For more standards like these, please refer to our Document Center List of Standards on Leather and Furs.

Monday, October 17, 2016

New Alarm and Warning Systems Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Alarm and Warning Systems are now available;


  • BS EN 50131-2-7-1, 2012 Edition with Amendment 2, Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Glass break detectors (acoustic)
  • BS EN 50131-2-7-2, 2012 Edition with Amendment 2, Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Glass break detectors (passive)
  • BS EN 50131-2-7-3, 2012 Edition with Amdendment 2, Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Glass break detectors (active)
  • BS EN 50194-2, 2006 Edition with Amendment 1, Electrical apparatus for the detection of combustible gases in domestic premises. Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises. Additional test methods and performance requirements
  • IEC 62820-1-1, Edition, 1.0, Building intercom systems - Part 1-1: System requirements - General
  • PD CLC 50131-2-9, 2016 Edition, Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Active infrared beam detectors


For more standards like these, please refer to our Document Center List of Standards on Alarm and Warning Systems.

Thursday, October 13, 2016

New Fire Resistance of Building Materials Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Fire Resistance of Building Materials are now available;


  • ASTM D7746, 2011 Edition Reapproved in 2016, Standard Practice for Calculating the Superimposed Load on Wood-frame Floor-Ceiling Assemblies for Standard Fire-Resistance Tests
  • ASTM E84, 2016 Edition, Standard Test Method for Surface Burning Characteristics of Building Materials
  • ASTM E119, 2016A Edition, Standard Test Methods for Fire Tests of Building Construction and Materials
  • ASTM E2599, 2016 Edition, Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
  • BS EN 13501-2, 2016 Edition, Fire classification of construction products and building elements. Classification using data from fire resistance tests, excluding ventilation services
  • BS EN 13501-4, 2016 Edition, Fire classification of construction products and building elements. Classification using data from fire resistance tests on components of smoke control systems
  • BS EN 15269-3, Corrigendum 1 for the 2012 Edition, Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware. Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows
  • DIN EN 81-73, 2016 Edition, Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 73: Behaviour of lifts in the event of fire


For more standards like these, please refer to our Document Center List of Standards on Fire Resistance of Building Materials.

Wednesday, October 12, 2016

New Surface Active Agents Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Surface Active Agents are now available;

  • ASTM D459, 2016 Edition, Standard Terminology Relating to Soaps and Other Detergents
  • ASTM D500, 1995 Edition Reapproved in 2016, Standard Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils
  • ASTM D501, 2003 Edition Reapproved in 2016, Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents
  • ASTM D502, 1989 Edition Reapproved in 2016, Standard Test Method for Particle Size of Soaps and Other Detergents
  • ASTM D820, 1993 Edition Reapproved in 2016, Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
  • ASTM D1570, 1995 Edition Reapproved in 2016, Standard Test Methods for Sampling and Chemical Analysis of Fatty Alkyl Sulfates
  • ASTM D1768, 1989 Edition Reapproved in 2016, Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
  • ASTM D2023, 1989 Edition Reapproved in 2016, Standard Test Method of Analysis for Sodium Toluene Sulfonate in Detergents
  • ASTM D2281, 2010 Edition Reapproved in 2016, Standard Test Method for Evaluation of Wetting Agents by the Skein Test
  • ASTM D2357, 2011 Edition Reapproved in 2016, Standard for Qualitative Classification of Surfactants by Infrared Absorption
  • ASTM D2358, 2016 Edition, Standard Test Method for Separation of Active Ingredient from Surfactant and Syndet Compositions
  • ASTM D3048, 1989 Edition Reapproved in 2016, Standard Test Method of Assay for Alkaline Protease
  • ASTM D3049, 1989 Edition Reapproved in 2016, Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration
  • ASTM D3375, 2016 Edition, Standard Test Method for Column Capacity of Particulate Mixed Bed Ion Exchange Materials
  • ASTM D3598, 1989 Edition Reapproved in 2016, Standard Test Method for Citrate in Synthetic Detergents
  • ASTM D4008, 2016 Edition, Standard Guide for Measuring Anti-Soil Deposition Properties of Laundry Detergents
  • ASTM D4251, 1989 Edition Reapproved in 2016, Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration


For more standards like these, please refer to our Document Center List of Standards on Surface Active Agents.

Friday, October 7, 2016

New Cranes Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Cranes are now available;


  • ASME B30.18, 2016 Edition, Stacker Cranes (Top or Under Running Bridge, Multiple Girder with Top or Under Running Trolley Hoist)
  • BS ISO 4301-1, 2016 Edition, Cranes. Classification. General
  • BS ISO 11031, 2016 Edition, Cranes. Principles for seismically resistant design
  • BS ISO 12480-3, Cranes. Safe use. Tower cranes
  • ISO 4301-1, 3rd Edition, Cranes - Classification - Part 1: General
  • ISO 11031, 1st Edition Reprint, Cranes - Principles for seismically resistant design
  • ISO 12480-3, 2nd Edition, Cranes - Safe use - Part 3: Tower cranes


For more standards like these, please refer to our Document Center List of Standards on Cranes.

Wednesday, October 5, 2016

New Nanotechnology Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Nanotechnology are now available.


  • IEC 62607-6-4, Edition 1.0, Nanomanufacturing - Key control characteristics - Part 6-4: Graphene - Surface conductance measurement using resonant cavity
  • ISO 16196, 1st Edition, Nanotechnologies - Compilation and description of sample preparation and dosing methods for engineered and manufactured nanomaterials
  • ISO 19006, 1st Edition, Nanotechnologies - 5-(and 6)-Chloromethyl-2,7 Dichloro-dihydrofluorescein diacetate (CM-H2DCF-DA) assay for evaluating nanoparticle-induced intracellular reactive oxygen species (ROS) production in RAW 264.7 macrophage cell line
  • PD ISO 19006, 2016 Edition, Nanotechnologies. 5-(and 6)-Chloromethyl-2’,7’ Dichlorodihydrofluorescein diacetate (CM-H2DCF- DA) assay for evaluating nanoparticle-induced intracellular reactive oxygen species (ROS) production in RAW 264.7 macrophage cell line


For more standards like these, please refer to our Document Center List of Standards on Physics, Chemistry.

Tuesday, October 4, 2016

New Welding Consumables Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Welding Consumables are now available;


  • BS EN ISO 17777, 2016 Edition, Welding consumables. Covered electrodes for manual metal arc welding of copper and copper alloys. Classification
  • BS EN ISO 19288, 2016 Edition, Welding consumables. Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys. Classification
  • DIN EN ISO 1071, 2016 Edition, Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification
  • DIN EN ISO 18273, 2016 Edition, Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification
  • ISO 17777, 1st Edition, Welding consumables - Covered electrodes for manual metal arc welding of copper and copper alloys - Classification
  • ISO 19288, 1st Edition, Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys - Classification


For more standards like these, please refer to our Document Center List of Standards on Welding Consumables.