Friday, October 30, 2015

New Plastic Pipe Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Plastic Pipes are now available:


  • ASTM D1785, 2015 Edition, Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
  • ASTM D3295, 2015 Edition, Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
  • ASTM F412, 2015 Edition, Standard Terminology Relating to Plastic Piping Systems
  • ASTM F645, 2015a Edition, Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
  • ASTM F656, 2015 Edition, Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
  • ASTM F2389, 2015 Edition, Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
  • BS EN ISO 1452-3, Corrigendum 1 for 2010 Edition, Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Fittings
  • DIN EN ISO 6259-1, 2015 Edition, Thermoplastics pipes - Determination of tensile properties - Part 1: General test method
  • ISO 18488, 1st Edition, Polyethylene (PE) materials for piping systems - Determination of Strain Hardening Modulus in relation to slow crack growth - Test method
  • ISO 18489, 1st Edition, Polyethylene (PE) materials for piping systems - Determination of resistance to slow crack growth under cyclic loading - Cracked Round Bar test method


For more standards like these, please see our Document Center List of Standards on Plastic Pipes.

Thursday, October 29, 2015

New Nanotechnology Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Nanotechnology are now available:


  • IEC 62607-4-1, Edition 2.0, Nanomanufacturing - Key control characteristics - Part 4-1: Cathode nanomaterials for nano-enabled electrical energy storage - Electrochemical characterisation, 2-electrode cell method
  • IEC 62607-4-3, Edition 1.0, Nanomanufacturing - Key control characteristics - Part 4-3: Nano-enabled electrical energy storage - Contact and coating resistivity measurements for nanomaterials
  • ISO 17466, 1st Edition, Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots
  • PD CEN ISO 12025, 2015 Edition with Corrigendum 1, Nanomaterials. Quantification of nano-object release from powders by generation of aerosols
  • PD CEN ISO 27687, Corrigendum 1 for 2009 Edition, Nanotechnologies. Terminology and definitions for nano-objects. Nanoparticle, nanofibre and nanoplate


For more standards like these, please see our Document Center List of Standards on Physics, Chemistry.

And check out my previous post:

Wednesday, October 28, 2015

New Medical Equipment Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Medical Equipment are now available:


  • BS EN 13718-2, 2015 Edition, Medical vehicles and their equipment. Air ambulances. Operational and technical requirements for air ambulances
  • BS EN 60601-1-2, 2015 Edition, Medical electrical equipment. General requirements for basic safety and essential performance. Collateral Standard. Electromagnetic disturbances. Requirements and tests
  • BS EN 60601-1-6, 2010 Edition with Amendment A1, Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Usability
  • SS EN 45502-1, 2015 Edition, Active implantable medical devices - Part 1: General requirements for safety, marking and information to be provided by the manufacturer


For more standards like these, please see our Document Center List of Standards on Medical Equipment.

You may also want to take a look at my previous post:

Tuesday, October 27, 2015

New Audio, Video And Audiovisual Engineering Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Audio, Video And Audiovisual Engineering are now available:


  • BS 7958, 2015 Edition, Closed circuit television (CCTV). Management and operation. Code of practice
  • BS EN 60728-7-1, 2005 Edition with Amendment A1, Cable networks for television signals, sound signals and interactive services. Hybrid Fibre Coax Outside Plant Status Monitoring. Physical (PHY) Layer Specification
  • BS EN 60958-3, 2006 Edition with Amendments A1 and A2, Digital audio interface. Consumer applications
  • BS EN 62379-3, 2015 Edition, Common control interface for networked digital audio and video products. Video
  • BS EN 62379-7, 2015 Edition, Common control interface for networked digital audio and video products. Measurements
  • IEC 62087, Withdrawn and replaced by IEC-62087-1 through IEC 62087-6, Methods of measurement for the power consumption of audio, video and related equipment
  • IEC 62087-1, Edition 1.0, Audio, video, and related equipment - Determination of power consumption - Part 1: General
  • IEC 62087-2, Edition 1.0, Audio, video, and related equipment - Determination of power consumption - Part 2: Signals and media
  • IEC 62087-3, Edition 1.0, Audio, video, and related equipment - Determination of power consumption - Part 3: Television sets
  • IEC 62087-4, Edition 1.0, Audio, video, and related equipment - Determination of power consumption - Part 4: Video recording equipment
  • IEC 62087-5, Edition 1.0, Audio, video, and related equipment - Determination of power consumption - Part 5: Set-top-boxes
  • IEC 62087-6, Edition 1.0, Audio, video, and related equipment - Determination of power consumption - Part 6: Audio equipment
  • IEC 62368-1, Corrigendum for Edition 2.0, Audio/video, information and communication technology equipment - Part 1: Safety requirements
  • IEC 62368-2, Edition 2.0, Audio/video, information and communication technology equipment - Part 2: Explanatory information related to IEC 62368-1
  • IEC 62379-3, Edition 1.0, Common control interface for networked digital audio and video products - Part 3: Video
  • IEC 62379-7, Edition 1.0, Common control interface for networked digital audio and video products - Part 7: Measurements
  • IEC 62753, Edition 1.0, Digital terrestrial television receivers for the DTMB system
  • IEC 62842, Edition 1.0, Multimedia home server systems - File allocation system with minimized reallocation


Friday, October 23, 2015

New Quality Management And Quality Assurance Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Quality Management And Quality Assurance are now available:


  • ASQ/ANSI/ISO 9000, 2015 Edition, Quality management systems - Fundamentals and vocabulary
  • ASQ/ANSI/ISO 9001, 2015 Edition, Quality management systems - Requirements
  • BS EN 9101, 2015 Edition, Quality Management Systems. Audit Requirements for Aviation, Space, and Defence Organisations
  • BS EN 16247-5, 2015 Edition, Energy audits. Competence of energy auditors
  • BS EN ISO 9000, 2015 Edition, Quality management systems. Fundamentals and vocabulary
  • BS EN ISO 9001, 2015 Edition, Quality Management Systems. Requirements
  • ISO 9000, 4th Edition, Quality management systems - Fundamentals and vocabulary
  • ISO 9001, 5th Edition, Quality management systems - Requirements
  • SS EN 9101, 2015 Edition, Quality Management Systems. Audit Requirements for Aviation, Space, and Defence Organisations
  • SS EN ISO 9001, 2015 Edition, Quality Management Systems. Requirements


Thursday, October 22, 2015

New Toy and other Entertainment Equipment Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Toys and other Entertainment Equipment are now available:


  • BS EN 71-5, 2015 Edition, Safety of toys. Chemical toys (sets) other than experimental sets
  • ISO 8124-7, 1st Edition, Safety of toys - Part 7: Requirements and test methods for finger paints
  • PD CEN 15071, 2015 Edition, Safety of toys. National translations of warnings and instructions for use in the EN 71 series


For more standards like these, please see our Document Center List of Standards on Equipment for Entertainment.

Wednesday, October 21, 2015

New Protection Against Crime Standards for 2015

Document Center Inc. is pleased to announce that the following New Standards on Protection Against Crime are now available:


  • ASTM E2057, 2010 Edition Reapproved in 2015, Standard Specifications for Preparation of Laboratory Analysis Requests in Sexual Assault Investigations
  • ASTM E2124, 2015 Edition, Standard Practice for Specification for Equipment and Supplies in Sexual Assault Investigations
  • ASTM F2814, 2009 Edition Reapproved in 2015, Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes
  • BS 4737-3.30, 2015 Edition, Intruder alarm systems. Specifications for components. Specification for PVC insulated cables for interconnecting wiring
  • BS 7958, 2015 Edition, Closed circuit television (CCTV). Management and operation. Code of practice
  • BS 8418, 2015 Edition, Installation and remote monitoring of detector-activated CCTV systems. Code of practice
  • BS 16000, 2015 Edition, Security management. Strategic and operational guidelines
  • BS EN 16747, 2015 Edition, Maritime and port security services
  • BS EN 50134-3, Corrigendum 1 for 2012 Edition, Alarm systems. Social alarm systems. Local unit and controller
  • ISO/IEC 20243, 1st Edition, Information Technology - Open Trusted Technology ProviderTM Standard (O-TTPS) - Mitigating maliciously tainted and counterfeit products
  • ISO 18788, 1st Edition, Management system for private security operations - Requirements with guidance for use


For more standards like these, please see our Document Center List of Standards on Protection Against Crime.

Tuesday, October 20, 2015

New Software Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Software are now available:


  • ASTM F1716, 1996 Edition Reapproved in 2015, Standard Guide for Transition and Performance of Marine Software Systems Maintenance
  • ISO/IEC/IEEE 15288, 3rd Edition, Systems and software engineering - System life cycle process
  • ISO/IEC/IEEE 15289, 2nd Edition, Systems and software engineering - Content of life-cycle information products (documentation)
  • ISO/IEC 15504-2, Withdrawn and replaced by ISO/IEC 33002, Information technology -- Software process assessment -- Part 2: A reference model for processes and process capability
  • ISO/IEC 16350, 1st Edition, Information technology -- Systems and software engineering -- Application management
  • ISO/IEC 19770-5, 2nd Edition, Information technology -- IT asset management -- Overview and vocabulary
  • ISO/IEC 33002, 2nd Edition, Information technology - Process assessment - Requirements for performing process assessment
  • ISO/IEC TS 30103, 1st Edition, Software and Systems Engineering - Lifecycle Processes - Framework for Product Quality Achievement
  • ISO/IEC 33063, 1st Edition, Information technology -- Process assessment -- Process assessment model for software testing


For more standards like these, please see our Document Center List of Standards on Software.

Friday, October 16, 2015

New Optoelectronics and Laser Equipment Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following new Standards on Optoelectronics and Laser Equipment are now available:


  • ANSI Z136.6, 2015 Edition, Safe Use Of Lasers Outdoors
  • ASTM F1364, 2003 Edition Reapproved in 2015, Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
  • BS EN 62007-1, 2015 Edition, Semiconductor optoelectronic devices for fibre optic system applications. Specification template for essential ratings and characteristics
  • BS EN ISO 11151-1, 2015 Edition, Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
  • BS EN ISO 11151-2, 2015 Edition, Lasers and laser-related equipment. Standard optical components. Components for the infrared spectral range
  • IEC-62906-1-2, Edition 1.0, Laser display devices - Part 1-2: Vocabulary and letter symbols
  • ISO 13142, 1st Edition, Electro-optical systems - Cavity ring-down technique for high-reflectance measurement


Thursday, October 15, 2015

New Rubber Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Rubber are now available:


  • ASTM C661, 2015 Edition, Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
  • ASTM C679, 2015 Edition, Standard Test Method for Tack-Free Time of Elastomeric Sealants
  • ASTM C794, 2015 Edition, Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
  • ASTM D297, 2015 Edition, Standard Test Methods for Rubber Products - Chemical Analysis
  • ASTM D1171, 2015 Edition, Standard Test Method for Rubber Deterioration - Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens)
  • ASTM D1229, 2003 Edition Reapproved in 2015, Standard Test Method for Rubber Property - Compression Set at Low Temperatures
  • ASTM D3182, 2015 Edition, Standard Practice for Rubber - Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
  • ASTM D3677, 2010 Edition Reapproved in 2015, Standard Test Methods for Rubber - Identification by Infrared Spectrophotometry
  • ASTM D4575, 2009 Edition Reapproved in 2015, Standard Test Methods for Rubber Deterioration - Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
  • ASTM D4678, 2015a Edition, Standard Practice for Rubber - Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
  • ASTM D5667, 1995 Edition Reapproved in 2015, Standard Test Method for Rubber From Synthetic Sources - Total and Water Soluble Ash
  • ASTM D5902, 2005 Edition Reapproved in 2015, Standard Test Method for Rubber - Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
  • ASTM D5963, 2002 Edition Reapproved in 2015, Standard Test Method for Rubber Property - Abrasion Resistance (Rotary Drum Abrader)
  • ASTM D6740, 2015 Edition, Standard Test Method for Silanes Used in Rubber Formulations(bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition
  • ASTM D6741, 2010 Edition Reapproved in 2015, Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content
  • ISO 289-1, 4th Edition, Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 1: Determination of Mooney viscosity
  • ISO 1658, 4th Edition, Natural rubber (NR) - Evaluation procedure
  • ISO 6133, 3rd Edition, Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
  • ISO 21561-1, Styrene-butadiene rubber (SBR) - Determination of the microstructure of solution-polymerized SBR - Part 1: 1H-NMR and IR with cast-film method


For more standards like these, please see our Document Center List of Standards on Rubber.

Wednesday, October 14, 2015

New Health Informatics Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the follow New Standards on IT Applications in Health Care Technology are now available:


  • ASTM F1629, Withdrawn, Standard Guide for Establishing Operating Emergency Medical Services and Management Information Systems, or Both (Withdrawn 2015)
  • BS EN ISO 10781, 2015 Edition, Health Informatics. HL7 Electronic Health Records-System Functional Model, Release 2 (EHR FM)
  • ISO 10781, 2nd Edition, Health Informatics - HL7 Electronic Health Records-System Functional Model, Release 2 (EHR FM)
  • ISO 13972, 1st Edition, Health informatics - Detailed clinical models, characteristics and processes
  • ISO 14199, 1st Edition, Health informatics - Information models - Biomedical Research Integrated Domain Group (BRIDG) Model
  • ISO 17522, 1st Edition, Health informatics - Provisions for health applications on mobile/smart devices
  • ISO 21549-5, 2nd Edition, Health informatics - Patient healthcard data - Part 5: Identification data
  • ISO 22077-2, 1st Edition, Health informatics - Medical waveform format - Part 2: Electrocardiography
  • ISO 22077-3, 1st Edition, Health informatics - Medical waveform format - Part 3: Long term electrocardiography



You can also take a look at my previous post:

Tuesday, October 13, 2015

New IT Applications In Transport And Trade Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on IT Applications In Transport And Trade are now available:


  • BS EN 15430-1, 2015 Edition, Winter and road service area maintenance equipments. Data acquisition and transmission. In-vehicle data acquisition
  • BS EN 15531-1, 2015 Edition, Public transport. Service interface for real-time information relating to public transport operations. Context and framework
  • BS EN 15531-2, 2015 Edition, Public transport. Service interface for real-time information relating to public transport operations. Communications
  • BS EN 15531-3, 2015 Edition, Public transport. Service interface for real-time information relating to public transport operations. Functional service interfaces
  • BS EN 15969-1, 2015 Edition, Tanks for transport of dangerous goods. Digital interface for the data transfer between tank vehicle and with stationary facilities. Protocol specification. Control, measurement and event data
  • BS EN 16454, 2015 Edition, Intelligent transport systems. ESafety. ECall end to end conformance testing
  • BS EN ISO 14906, 2011 Edition with Amendment A1, Electronic fee collection. Application interface definition for dedicated short-range communication
  • ISO 11067, 1st Edition, Intelligent transport systems - Curve speed warning systems (CSWS) - Performance requirements and test procedures
  • ISO 14906 Amendment 1 for 2nd Edition, Electronic fee collection - Application interface definition for dedicated short-range communication
  • ISO 14907-1, 3rd Edition, Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures
  • ISO 16786, 1st Edition, Intelligent transport systems - The use of simulation models for evaluation of traffic management systems - Input parameters and reporting template for simulation of traffic signal control systems
  • ISO 17465-2, 1st Edition, Intelligent transport systems - Cooperative ITS - Part 2: Guidelines for standards documents
  • ISO 17465-3, 1st Edition, Intelligent transport systems - Cooperative ITS - Part 3: Release procedures for standards documents
  • ISO 17515-1, 1st Edition, Intelligent transport systems - Communications access for land mobiles (CALM) - Evolved Universal Terrestrial Radio Access Network (E-UTRAN) - Part 1: General usage
  • ISO 21214, 2nd Edition, Intelligent transport systems - Communications access for land mobiles (CALM) - Infra-red systems
  • ISO/IEC 15944-6, 2nd Edition, Information technology - Business Operational View - Part 6: Technical introduction to e-Business modelling



You can also review my previous post:

Monday, October 12, 2015

New Nuclear Energy Engineering Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Nuclear Energy Engineering are now available:


  • ASTM C787, 2015 Edition, Standard Specification for Uranium Hexafluoride for Enrichment
  • ASTM C996, 2015 Edition, Standard Specification for Uranium Hexafluoride Enriched to Less Than 5% 235U
  • ASTM C1187, 2015 Edition, Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks
  • ASTM C1268, 2015 Edition, Standard Test Method for Quantitative Determination of 241Am in Plutonium by Gamma-Ray Spectrometry
  • ASTM C1295, 2015 Edition, Standard Test Method for Gamma Energy Emission from Fission and Decay Products in Uranium Hexafluoride and Uranyl Nitrate Solution
  • ASTM C1432, 2015 Edition, Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
  • ASTM C1455, 2014 Edition with Editorial Correction, Standard Test Method for Nondestructive Assay of Special Nuclear Material Holdup Using Gamma-Ray Spectroscopic Methods
  • ASTM D7301, 2011 Edition Reapproved in 2015, Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose
  • ASTM E261, 2015 Edition, Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
  • ASTM E265, 2015 Edition, Standard Test Method for Measuring Reaction Rates and Fast-Neutron Fluences by Radioactivation of Sulfur-32
  • ASTM E481, 2015 Edition, Standard Test Method for Measuring Neutron Fluence Rates by Radioactivation of Cobalt and Silver
  • ASTM E815, 2015 Edition, Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels
  • ASTM E1281, 2015 Edition, Standard Guide for Nuclear Facility Decommissioning Plans
  • ASTM E1819, 2015 Edition, Standard Guide for Environmental Monitoring Plans for Decommissioning of Nuclear Facilities
  • ASTM E2215, 2015 Edition, Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels
  • ASTM E2420, 2015 Edition, Standard Guide for Post-Deactivation Surveillance and Maintenance of Radiologically Contaminated Facilities
  • ASTM E2421, 2015 Edition, Standard Guide for Preparing Waste Management Plans for Decommissioning Nuclear Facilities
  • IEC 62987, Edition 1.0, Nuclear power plants - Instrumentation and control systems important to safety - Use of Failure Mode and Effects Analysis (FMEA) and related methods to support the justification of systems
  • IEEE/IEC 62582-5, 2015 Edition, IEEE/IEC Nuclear power plants -- Instrumentation and control important to safety -- Electrical equipment condition monitoring methods -- Part 5: Optical time domain reflectometry
  • ISO 21613, 1st Edition, (U, Pu)O2 Powders and sintered pellets - Determination of chlorine and fluorine


For more standards like these, please see our Document Center List of Standards on Nuclear Energy Engineering.

You may also want to take a look at my previous post:

Friday, October 9, 2015

New Gas Pressure Vessel, Gas Cylinder Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Gas Pressure Vessels and Gas Cylinders are now available:


  • ASTM E1419/E1419M, 2015 Edition, Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission
  • BS EN 764-1, 2015 Edition, Pressure equipment. Vocabulary
  • BS EN 764-3, Withdrawn and replaced by BS EN 764-1, Pressure equipment. Definition of parties involved
  • BS EN 13445-1, 2014 Edition with Amendment A1 and Corrigendum 1, Unfired pressure vessels. General
  • BS EN 13445-2, Corrigendum 1 for 2014 Edition, Unfired pressure vessels. Materials
  • BS EN 13445-3, 2014 Edition with Amendment A1, Unfired pressure vessels. Design
  • BS EN 13445-5, Corrigendum 1 for 2014 Edition, Unfired pressure vessels. Fabrication
  • BS EN 13445-6, Corrigendum 1 for 2014 Edition, Unfired pressure vessels. Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
  • BS EN 13445-8, 2014 Edition with Amendment A1, Unfired pressure vessels. Additional requirements for pressure vessels of aluminium and aluminium alloys
  • BS EN ISO 9809-3, Corrigendum 1 for 2010 Edition, Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing. Normalized steel cylinders
  • BS EN ISO 10286, 2015 Edition, Gas cylinders. Terminology
  • BS EN ISO 17871, 2015 Edition, Gas cylinders. Quick-release cylinder valves. Specification and type testing
  • ISO 10286, 4th Edition, Gas cylinders - Terminology
  • ISO 11118, 2nd Edition, Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods
  • ISO 14456, 1st Edition, Gas cylinders - Gas properties and associated classification (FTSC) codes
  • ISO 16964, 1st Edition, Gas cylinders - Flexible hoses assemblies - Specification and testing
  • ISO 17871, 1st Edition, Gas cylinders - Quick-release cylinder valves - Specification and type testing
  • PD 5500, 2015 Edition with Amendment A1, Specification for unfired fusion welded pressure vessels
  • PD CEN 13445-101, 2015 Edition, Unfired pressure vessels. Example of application
  • PD CEN 13445-102, 2015 Edition, Unfired pressure vessels. Example of application of vertical vessel with bracket supports



You can also review my previous post:

Thursday, October 8, 2015

New Electromagnetic Compatibility (EMC) Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Electromagnetic Compatibility (EMC) are now available:


  • BS EN 12895, 2015 Edition, Industrial trucks. Electromagnetic compatibility
  • BS EN 55032, 2015 Edition, Electromagnetic compatibility of multimedia equipment. Emission Requirements
  • BS EN 60601-1-2, 2015 Edition, Medical electrical equipment. General requirements for basic safety and essential performance. Collateral Standard. Electromagnetic disturbances. Requirements and tests
  • CISPR 11, Edition 6.0, Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
  • CISPR 16-1-1, Edition 4.0, Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
  • CISPR 16-3 Edition 3.0 Amendment 2, Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 3: CISPR technical reports
  • IEC 60533, Edition 3.0, Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull
  • IEC 61000-4-6, Corrigendum for Edition 4.0, Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
  • IEC 61000-4-38, Edition 1.0, Electromagnetic compatibility (EMC) - Part 4-38: Testing and measurement techniques - Test, verification and calibration protocol for voltage fluctuation and flicker compliance test systems
  • IEC 61000-6-5, Edition 1.0, Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment



You may also want to review my previous post:

Wednesday, October 7, 2015

New Concrete And Concrete Product Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Concrete And Concrete Products are now available:


  • ASTM C31, 2015 Edition, Standard Practice for Making and Curing Concrete Test Specimens in the Field
  • ASTM C125, 2015a Edition, Standard Terminology Relating to Concrete and Concrete Aggregates
  • ASTM C140, 2015 Edition, Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
  • ASTM C143, 2015 Edition, Standard Test Method for Slump of Hydraulic-Cement Concrete
  • ASTM C494, 2015 Edition, Standard Specification for Chemical Admixtures for Concrete
  • ASTM C1383, 2015 Edition, Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
  • ASTM D7508, 2010 Edition Reapproved in 2015, Standard Specification for Polyolefin Chopped Strands for Use in Concrete
  • BS 1881-124, 2015 Edition, Testing concrete. Methods for analysis of hardened concrete
  • BS EN 12390-11, 2015 Edition, Testing hardened concrete. Determination of the chloride resistance of concrete, unidirectional diffusion


For more standards like these, please see our Document Center List of Standards on Concrete And Concrete Products.

You can also review my previous post: