Friday, October 31, 2014

New Electronic Component Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on  Electronic Components are now available:


  • BS IEC 62396-2, 2014 Edition, Process management for avionics. Atmospheric radiation effects. Guidelines for single event effects testing for avionics systems
  • BS IEC 62396-5, 2014 Edition, Process management for avionics. Atmospheric radiation effects. Assessment of thermal neutron fluxes and single event effects in avionics systems
  • IEC 62668-1, Edition 2.0, Process management for avionics - Counterfeit prevention - Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components
  • IEC 62668-2, Edition 1.0, Process management for avionics - Counterfeit prevention - Part 2: Managing electronic components from non-franchised sources
  • IPC A 610, Revision F, Acceptability of Electronic Assemblies
  • J STD 001, Revision F, Requirements for Soldered Electrical and Electronic Assemblies


For more standards like these, please see our Document Center List of Standards on  Electronic Components.  

You can also review my previous blogs:



Thursday, October 30, 2014

New Electromagnetic Emission Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Electromagnetic Emission are now available:


  • BS EN 55016-1-2, 2014 Edition, Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Coupling devices for conducted disturbance measurements
  • BS EN 55016-2-1, 2014 Edition, Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity. Conducted disturbance measurements
  • BS EN 55016-2-3, 2010 Edition with Amendments 1 and 2, Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity. Radiated disturbance measurements
  • BS EN 55016-4-2, 2011 Edition with Amendment 1, Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modelling. Measurement instrumentation uncertainty
  • BS EN 60255-25, Withdrawn and replaced by BS EN 60255-26, Electrical relays. Electromagnetic emission tests for measuring relays and protection equipment
  • BS EN 60255-26, 2013 Edition, Measuring relays and protection equipment. Electromagnetic compatibility requirements
  • BS EN 61000-3-2, 2014 Edition, Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current < or = 16 A per phase)
  • CISPR 16-1-1 Amendment 2, Amendment 2 for the Edition 3.0, Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
  • CISPR 16-4-5 Amendment 1, Amendment 1 for Edition 1.0, Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods
  • DIN EN 12015, 2014 Edition, Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission (English Language Edition)
  • IEC 61000-2-4, Corrigendum for Edition 2.0, Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances
  • IEC 61000-3-2, Edition 4.0, Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current < or = 16 A per phase)


For more standards like these, please see our Document Center List of Standards on Electromagnetic Emissions.

And you'll also want to take a look at my previous blog:

Wednesday, October 29, 2014

New Air Quality Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Air Quality are now available:


  • ASTM D1914, 1995 Edition Reapproved in 2014, Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
  • ASTM D4766, 1998 Edition Reapproved in 2014, Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method)
  • ASTM D5157, 1997 Edition Reapproved in 2014, Standard Guide for Statistical Evaluation of Indoor Air Quality Models
  • ASTM D5755, 2009 Edition Reapproved in 2014 with an Editorial Correction, Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
  • ASTM D7202, 2014 Edition with an Editorial Correction, Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
  • BS EN ISO 16000-32, 2014 Edition, Indoor air. Investigation of buildings for the occurrence of pollutants
  • BS ISO 14385-1, 2014 Edition, Stationary source emissions. Greenhouse gases. Calibration of automated measuring systems
  • BS ISO 14385-2, 2014 Edition, Stationary source emissions. Greenhouse gases. Ongoing quality control of automated measuring systems
  • BS ISO 22262-2, 2014 Edition, Air quality. Bulk materials. Quantitative determination of asbestos by gravimetric and microscopical methods
  • DIN EN 12341, 2014 Edition, Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter (English language edition)
  • DIN EN 14212, Corrigendum for the 2012 Edition, Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence (German language only)
  • DIN EN 14907, Withdrawn and replaced by DIN EN 12341, Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • IEC 62726, Edition 1.0, Guidance on quantifying greenhouse gas emission reductions from the baseline for electrical and electronic products and systems
  • ISO 14385-1, 1st Edition, Stationary source emissions - Greenhouse gases - Part 1: Calibration of automated measuring systems
  • ISO 14385-2, 1st Edition, Stationary source emissions - Greenhouse gases - Part 2: Ongoing quality control of automated measuring systems
  • ISO 16000-30, 1st Edition, Indoor air - Part 30: Sensory testing of indoor air
  • ISO 16000-32, 1st Edition, Indoor air - Part 32: Investigation of buildings for the occurrence of pollutants
  • ISO 22262-2, 1st Edition, Air quality - Bulk materials - Part 2: Quantitative determination of asbestos by gravimetric and microscopical methods
  • ISO/DIS 14644-1, Public Review 2nd Edition Draft, Cleanrooms and associated controlled environments -- Part 1: Classification of air cleanliness
  • ISO/DIS 14644-2, Public Review 2nd Edition Draft, Cleanrooms and associated controlled environments -- Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration


For more standards like these, please go to our Document Center List of Standards on Air Quality.  There will also be additional links to the various sub-topics of this category.

You'll also want to review my previous postings:




Tuesday, October 28, 2014

New EMC Immunity Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on EMC Immunity are now available:


  • BS EN 55016-1-2, 2014 Edition, Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Coupling devices for conducted disturbance measurements
  • BS EN 55016-2-1, 2014 Edition, Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity. Conducted disturbance measurements
  • BS EN 55016-2-3, 2010 Edition with Amendment 2,  Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity. Radiated disturbance measurements
  • BS EN 55016-4-2, 2011 Edition with Amendment 1, Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modelling. Measurement instrumentation uncertainty
  • BS EN 60255-26, 2013 Edition, Measuring relays and protection equipment. Electromagnetic compatibility requirements
  • BS EN 61000-4-5, 2014 Edition, Electromagnetic compatibility (EMC). Testing and measurement techniques. Surge immunity test
  • BS EN 61000-4-19, 2014 Edition, Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports
  • CISPR 16-4-5 Amendment 1, Amendment 1 for Edition 1.0, Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods
  • IEC 61000-2-4, Corrigendum 1 for Edition 2.0, Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances
  • SIS-EN-61000-4-5, 3rd Edition, Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test (English language edition)


For more standards like these, please see our Document Center List of Standards on EMC Immunity.

Monday, October 27, 2014

New Occupational Safety and Industrial Hygiene Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Occupational Safety and Industrial Hygiene are now available:


  • ASTM E2072, 2014 Edition, Standard Specification for Photoluminescent (Phosphorescent) Safety Markings
  • ASTM E2693, 2014 Edition, Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment
  • BS EN ISO 14001, 2014 Public Review Draft, Environmental management systems, Requirements with guidance for use
  • BS ISO 13577-2, 2014 Edition, Industrial furnaces and associated processing equipment. Safety. Combustion and fuel handling systems
  • BS ISO 13577-4, 2014 Edition, Industrial furnace and associated processing equipment. Safety. Protective systems
  • ISO 13392, 1st Edition, Health and safety in welding and allied processes - Arc welding fume components
  • ISO 13577-2, 1st Edition, Industrial furnaces and associated processing equipment - Safety - Part 2: Combustion and fuel handling systems
  • ISO 13577-4, 1st Edition, Industrial furnace and associated processing equipment - Safety - Part 4: Protective systems
  • ISO 18786, 1st Edition, Health and safety in welding - Guidelines for risk assessment of welding fabrication activities


Friday, October 24, 2014

New Sports Equipment And Facility Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Sports Equipment And Facilities are now available:


  • ASTM F803, 2014 Edition, Standard Specification for Eye Protectors for Selected Sports
  • ASTM F1063, 2009 Edition Reapproved in 2014, Standard Practice for Functional Inspections and Adjustments of Alpine Ski/Binding/Boot Systems
  • ASTM F1776, 2014 Edition, Standard Specification for Eye Protective Devices for Paintball Sports
  • ASTM F1979, 2010 Edition Reapproved in 2014, Standard Specification for Paintballs Used in the Sport of Paintball
  • ASTM F2774, 2009 Edition Reapproved in 2014, Standard Practice for Manufacturing Quality Control of Consumer Trampoline Bed Material
  • BS 8478, Withdrawn and replaced by BS EN 12021, Respiratory protective devices. Breathing gases for diving and hyperbaric applications. Requirements and test methods
  • BS EN 13451-5, 2014 Edition, Swimming pool equipment. Additional specific safety requirements and test methods for lane lines and dividing line
  • BS ISO 20712-3, 2014 Edition, Water safety signs and beach safety flags. Guidance for use
  • DIN EN 12229, 2014 Edition, Surfaces for sports areas - Procedure for the preparation of synthetic turf and needle-punch test pieces
  • DIN EN 15306, 2014 Edition, Surfaces for outdoor sports areas - Exposure of synthetic turf to simulated wear



For more standards like these, please see our Document Center List of Standards on Sports Equipment And Facilities.  There will be additional links on that page for specific sub-topics.

And you'll also want to review my previous blog:

Thursday, October 23, 2014

New Nuclear Energy Engineering Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Nuclear Energy Engineering are now available:


  • ASTM C781, 2008 Edition Reaffirmed in 2014, Standard Practice for Testing Graphite and Boronated Graphite Materials for High-Temperature Gas-Cooled Nuclear Reactor Components
  • ASTM C859, 2014b Edition, Standard Terminology Relating to Nuclear Materials
  • ASTM C1204, 2014 Edition, Standard Test Method for Uranium in Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration
  • ASTM C1295, 2014 Edition, Standard Test Method for Gamma Energy Emission from Fission and Decay Products in Uranium Hexafluoride and Uranyl Nitrate Solution
  • ASTM D7219, 2008 Edition Reapproved in 2014, Standard Specification for Isotropic and Near-isotropic Nuclear Graphites
  • BS EN 61839, Corrigendum 1 for 2000 Edition, Nuclear power plants. Design of control rooms. Functional analysis and assignment
  • BS IEC 62705, 2014 Edition, Nuclear power plants. Instrumentation and control important to safety. Radiation monitoring systems (RMS): Characteristics and lifecycle
  • IEC 62645, Edition 1.0, Nuclear power plants - Instrumentation and control systems - Requirements for security programmes for computer-based systems
  • IEC 62705, Edition 1.0, Nuclear power plants - Instrumentation and control important to safety - Radiation monitoring systems (RMS): Characteristics and lifecycle
  • IEC 62918, Edition 1.0, Nuclear power plants - Instrumentation and control important to safety - Use and selection of wireless devices to be integrated in systems important to safety


Want to see other standards like these?  Please visit our page: Document Center List of Standards on Nuclear Energy Engineering.  There are also additional links on that page to sub-topics of interest.

And don't forget to take a look at my previous blog:

Wednesday, October 22, 2014

New Environmental Protection Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Environmental Protection are now available:


  • ASTM E2101, 2014 Edition (Reinstated), Guidance on quantifying greenhouse gas emission reductions from the baseline for electrical and electronic products and systems
  • ASTM E2107, 2006 Edition Reaffirmed in 2014, Standard Practice for Environmental Regulatory Compliance Audits
  • BS EN 16575, 2014 Edition, Bio-based products. Vocabulary
  • BS EN ISO 14001, 2014 Public Review Draft, Environmental management systems, Requirements with guidance for use
  • BS ISO 14046, 2014 Edition, Environmental management. Water footprint. Principles, requirements and guidelines
  • BS ISO 17325-1, 2014 Edition, Ships and marine technology. Marine environment protection. Oil booms. Design requirements
  • IEC 62726, Edition 1.0, Guidance on quantifying greenhouse gas emission reductions from the baseline for electrical and electronic products and systems
  • ISO 14046, 1st Edition, Environmental management - Water footprint - Principles, requirements and guidelines
  • ISO/DIS-14001, Proposed 3rd Edition (Draft), Environmental management systems - Requirements with guidance for use - Draft Edition


For more standards on this topic, please see our Document Center List of Standards on Environmental Protection.  There are also more links to the additional sub-topics on this page.

You'll also want to review my previous blogs:




Tuesday, October 21, 2014

New Sterilization and Disinfection Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Sterilization and Disinfection are now available:


  • AAMI TIR37, 2013 Edition, Sterilization of health care products - Radiation - Guidance on sterilization of biologics and tissue-based products
  • AAMI TIR56, 2013 Edition, Guidance for the development, validation and routine control of an ethylene oxide sterilization process utilizing flexible bag systems for the sterilization of medical devices
  • BS EN ISO 11135, 2014 Edition, Sterilization of health-care products. Ethylene oxide. Requirements for the development, validation and routine control of a sterilization process for medical devices (replaces BS EN ISO 11135-1)
  • BS EN ISO 11607-1, 2009 Edition with Amendment 1, Packaging for terminally sterilized medical devices. Requirements for materials, sterile barrier systems and packaging systems
  • BS EN ISO 11607-2, 2006 Edition with Amendment 1, Packaging for terminally sterilized medical devices. Validation requirements for forming, sealing and assembly processes
  • BS EN ISO 15883-1, 2009 Edition with Amendment 1, Washer-disinfectors. General requirements, terms and definitions and tests
  • DIN EN 1422, 2014 Edition, Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods (English Language Edition)
  • ISO 11135, 2nd Edition , Sterilization of health-care products -- Ethylene oxide -- Requirements for the development, validation and routine control of a sterilization process for medical devices (replaces ISO 11135-1 and ISO 11135-2)
  • ISO 11607-1 Amendment 1, Amendment 1 for the 1st Edition, Packaging for Terminally Sterilized Medical Devices - Part 1: Requirements for Materials, Sterile Barrier Systems and Packaging Systems
  • ISO 11607-2 Amendment 1, Amendment 1 for the 1st Edition, Packaging for Terminally Sterilized Medical Devices - Part 2: Validation Requirements for Forming, Sealing and Assembly Processes
  • ISO 15883-1 Amendment 1, Amendment 1 for the 1st Edition, Washer-disinfectors - Part 1: General requirements, terms and definitions and tests
  • SIS EN ISO 11607-1 Amendment 1, Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2009/Amd 1:2014) Swedish Standard, English language edition
  • SIS EN ISO 11607-2 Amendment 1, Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006/Amd 1:2014) Swedish Standard, English language edition


Would you like to see more standards like these?  Please go to our Document Center List of Standards on Sterilization and Disinfection and follow the links to the sub-topics you're interested in.

And don't forget to review my previous blogs:






Monday, October 20, 2014

New Mechanical Testing Of Metals Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on the Mechanical Testing Of Metals are now available:


  • ASTM A370, 2014 Edition, Standard Test Methods and Definitions for Mechanical Testing of Steel Products
  • ASTM B831, 2014 Edition, Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
  • ASTM E10, 2014 Edition, Standard Test Method for Brinell Hardness of Metallic Materials
  • ASTM E110, 2014 Edition, Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
  • ASTM E290, 2014 Edition, Standard Test Methods for Bend Testing of Material for Ductility
  • ASTM E467, 2008 Edition Reapproved in 2014, Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System
  • ASTM E647, 2013a Edition with an Editorial Correction, Standard Test Method for Measurement of Fatigue Crack Growth Rates
  • BS EN ISO 10113, Corrigendum 1 for 2006 Edition, Metallic materials. Sheet and strip. Determination of plastic strain ratio (FYI: Renumbers BS ISO 10113)
  • BS EN ISO 10275, Corrigendem 1 for 2007 Edition, Metallic materials. Sheet and strip. Determination of tensile strain hardening exponent
  • BS EN ISO 16808, 2014 Edition, Metallic materials. Sheet and strip. Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems
  • ISO 16808, 1st Edition, Metallic materials - Sheet and strip - Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems


For more standards like these, please see our Document Center List of Standards on the Mechanical Testing Of Metals.

You'll also want to take a look at these previous blogs:






Friday, October 17, 2014

New Food Technology Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards for Food Technology are now available:

  • ASTM E2262, 2003 Edition Reaffirmed in 2014, Standard Practice for Estimating Thurstonian Discriminal Distances
  • BS EN 12873-1, 2014 Edition, Influence of materials on water intended for human consumption. Influence due to migration. Test method for factory-made products made from or incorporating organic or glassy (porcelain/vitreous enamel) materials
  • BS EN ISO 3493, 2014 Edition, Vanilla. Vocabulary
  • BS EN ISO 12228-1, 2014 Edition (replaced BS EN ISO 12228), Determination of individual and total sterols contents. Gas chromatographic method. Animal and vegetable fats and oils
  • BS EN ISO 16297, 2014 Edition with Corrigendum (replaces BS ISO 16297), Milk. Bacterial count. Protocol for the evaluation of alternative methods
  • BS ISO 18301, 2014 Edition, Animal and vegetable fats and oils. Determination of conventional mass per volume (litre weight in air). Oscillating U-tube method
  • BS ISO 22004, 2014 Edition, Food safety management systems. Guidance on the application of ISO 22000
  • DIN EN 12042, 2014 Edition, Food processing machinery - Automatic dough dividers - Safety and hygiene requirements
  • DIN EN 14122, 2014 Edition, Foodstuffs - Determination of vitamin B1 by high performance liquid chromatography
  • DIN EN 14152, 2014 Edition, Foodstuffs - Determination of vitamin B2 by high performance liquid chromatography
  • DIN EN ISO 8968-1, 2014 Edition, Milk and milk products - Determination of nitrogen content - Part 1: Kjeldahl principle and crude protein calculation (ISO 8968-1:2014)
  • ISO 5555 Amendment 1 for the 3rd Edition, Amendment 1: Flexitanks, Animal and vegetable fats and oils -- Sampling
  • ISO 8586, 1st Edition Corrected Reprint, Sensory analysis - General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors
  • ISO 12228-1, 1st Edition, Determination of individual and total sterols contents - Gas chromatographic method - Part 1: Animal and vegetable fats and oils
  • ISO 17383, 1st Edition, Determination of the triacylglycerol composition of fats and oils - Determination by capillary gas chromatography
  • ISO 18301, 1st Edition, Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air) - Oscillating U-tube method
  • ISO 22004, 1st Edition, Food safety management systems - Guidance on the application of ISO 22000
  • ISO 51204, Withdrawn and replaced by ISO 51702, Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing


For Food Technology Standards, you'll go to the Document Center List of Standards on Food Technology.  You'll follow the links to the various sub-topics available.

Thursday, October 16, 2014

New Materials for Aerospace Construction Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Materials for Aerospace Construction are now available:


  • ASTM C800, 2014 Edition, Standard Specification for Fibrous Glass Blanket Insulation (Aircraft Type)
  • BS 2PL-1, Withdrawn without replacement, Specification for phenolic mouldings for aeronautical purposes
  • BS 2V-35, Withdrawn without replacement, Specification for plywood for aeronautical purposes
  • BS 2V-37, Withdrawn without replacement, Specification for Sitka spruce as finished timber
  • BS 3V-4, Withdrawn without replacement, Specification for aircraft material. Ash
  • BS EN 2032-001, 2014 Edition (Replaces BS-EN-2032-1), Aerospace series. Metallic materials. Conventional designation
  • BS EN 2226, 2014 Edition, Aerospace series. Steel X105CrMo17 (1.4125). Hardened and tempered. Hand and die forgings. De = 150 mm
  • BS EN 2402, 2014 Edition, Aerospace series. Heat resisting nickel base alloy NiCr20Co3Fe3. Annealed. Wire. D = 10 mm
  • BS EN 4293, 2014 Edition, Aerospace series. Aluminium alloy AL-P7175. T73511. Extruded bar and section. a or D = 150 mm
  • BS EN 4707, 2014 Edition, Aerospace series. Acid pickling of aluminum and aluminum alloy without hexavalent chromium


For more standards like these, please see our Document Center List of Standards on Materials for Aerospace Construction.  There's links to additional sub-topics as well.

You can also review my previous posting:

Wednesday, October 15, 2014

New Medical Equipment Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Medical Equipment in General are now available:


  • BS EN 13718-1, 2014 Edition, Medical vehicles and their equipment. Air ambulances. Requirements for medical devices used in air ambulances
  • BS EN 60601-1-8, Corrigendum1 for the 2007 Edition with Amendment 1, Medical electrical equipment. General requirements for basic safety and essential performance. Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
  • IEC 60601-1 Amendment 1, Corrigendum 1 for Amendment 1,  Amendment 1 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
  • IEC 62353, Edition 2.0, Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment
  • IEC 62354, Edition 3.0, General testing procedures for medical electrical equipment
  • IEC 80002-3, Edition 1.0, Medical device software - Part 3: Process reference model of medical device software life cycle processes (IEC 62304)
  • ISO 19244, 1st Edition, Guidance on transition periods for standards developed by ISO/TC 84 - Devices for administration of medicinal products and catheters
  • ISO/DIS 13485, Public Review Draft for the proposed 3rd Edition, Medical Devices - Quality Management Systems - Requirements for Regulatory Purposes


For more standards like these, please see our Document Center List of Standards on Medical Equipment in General.

You may also want to review some of my previous blogs:



Tuesday, October 14, 2014

New FDA Medical Device Guidance Documents for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New FDA Guidance Documents are now available:





Want to know more about other recently released FDA Guidance Documents?  Please see my previous blogs:





And to get the latest information for 2015:

New FDA Medical Device Guidance Documents for the 1st Quarter 2015

Monday, October 13, 2014

New Toy and other Entertainment Equipment Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Toys and other Entertainment Equipment are now available:


  • ASTM F853, Withdrawn without replacement, Standard Practice for Maintenance Procedures for Amusement Rides and Devices
  • ASTM F1193, 2014 Edition, Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
  • ASTM F1951, 2014 Edition, Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment
  • BS EN 1176-11, 2014 Edition, Playground equipment and surfacing. Additional specific safety requirements and test methods for spatial network
  • DIN EN 71-1, 2014 Edition, Safety of toys - Part 1: Mechanical and physical properties; German version EN 71-1:2011+A3:2014 (English language)
  • DIN EN 71-2, 2014 Edition, Safety of toys - Part 2: Flammability; German version EN 71-2:2011+A1:2014 (English language)
  • DIN EN 71-7, 2014 Edition, Safety of toys - Part 7: Finger paints - Requirements and test methods; German version EN 71-7:2014 (English language)
  • ISO 8124-2, 3rd Edition, Safety of toys - Part 2: Flammability
  • ISO 8124-4, 2nd Edition, Safety of toys - Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use
  • ISO 8124-6, 1st Edition, Safety of toys - Part 6: Certain phthalate esters in toys and childrens products
  • ISO 8124-8, 1st Edition, Safety of toys - Part 8: Age determination guidelines
  • ISO 17929, 1st Edition, Biomechanical effects on amusement ride passengers


For other standards like these, please see our Document Center List of Standards on Toys and other Entertainment Equipment.  There are links to the various sub-topics for this classification on that page.

You'll also want to review my previous blogs:




Want to know about the latest releases?  Read my new post:

Friday, October 10, 2014

New Industrial Process Measurement and Control Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Industrial Process Measurement and Control are now available:


  • BS EN 60770-3, 2014 Edition, Transmitters for use in industrial-process control systems. Methods for performance evaluation of intelligent transmitters
  • BS EN 61918, 2013 Edition, Industrial communication networks. Installation of communication networks in industrial premises
  • IEC 60770-3, Edition 2.0, Transmitters for use in industrial-process control systems - Part 3: Methods for performance evaluation of intelligent transmitters
  • IEC-61158-3-1, Edition 2.0, Industrial communication networks - Fieldbus specifications - Part 3-1: Data-link layer service definition - Type 1 elements
  • IEC 61158-3-2, Edition 2.0, Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer service definition - Type 2 elements
  • IEC 61158-3-3, Edition 2.0, Industrial communication networks - Fieldbus specifications - Part 3-3: Data-link layer service definition - Type 3 elements
  • IEC 61158-3-4, Edition 2.0, Industrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer service definition - Type 4 elements
  • IEC 61158-3-12, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition - Type 12 elements
  • IEC 61158-3-13, Edition 2.0, Industrial communication networks - Fieldbus specifications - Part 3-13: Data link layer service definition - Type 13 elements
  • IEC 61158-3-14, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 3-14: Data-link layer service definition - Type 14 elements
  • IEC 61158-3-19, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 3-19: Data-link layer service definition - Type 19 elements
  • IEC 61158-3-20, Edition 1.0, Industrial communication networks - Fieldbus specifications - Part 3-20: Data-link layer service definition - Type 20 elements
  • IEC 61158-3-22, Edition 2.0, Industrial communication networks - Fieldbus specifications - Part 3-22: Data-link layer service definition - Type 22 elements
  • IEC 61158-3-24, Edition 1.0, Industrial communication networks - Fieldbus specifications - Part 3-24: Data-link layer service definition - Type 24 elements
  • IEC 61158-4-1, Edition 2.0, Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 elements
  • IEC 61158-4-2, Edition 3.0, VIndustrial communication networks - Fieldbus specifications - Part 4-2: Data-link layer protocol specification - Type 2 elements
  • IEC 61158-4-3, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specificationn - Type 3 elements
  • IEC 61158-4-4, Edition 2.0, Industrial communication networks - Fieldbus specifications - Part 4-4: Data-link layer protocol specificationn - Type 4 elements
  • IEC 61158-4-11, Edition 2.0, Industrial communication networks - Fieldbus specifications - Part 4-11: Data-link layer protocol specificationn - Type 11 elements
  • IEC 61158-4-12, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 4-12: Data-link layer protocol specification - Type 12 elements
  • IEC 61158-4-13, Edition 2.0, Industrial communication networks - Fieldbus specifications - Part 4-13: Data-link layer protocol specificationn - Type 13 elements
  • IEC 61158-4-14, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 4-14: Data-link layer protocol specificationn - Type 14 elements
  • IEC 61158-4-19, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 4-19: Data-link layer protocol specification - Type 19 elements
  • IEC 61158-4-20, Edition 1.0, Industrial communication networks - Fieldbus specifications - Part 4-20: Data-link layer protocol specification - Type 20 elements
  • IEC 61158-4-22, Edition 2.0, Industrial communication networks - Fieldbus specifications - Part 4-22: Data-link layer protocol specificationn - Type 22 elements
  • IEC 61158-4-24, Edition 1.0, Industrial communication networks - Fieldbus specifications - Part 4-24: Data-link layer protocol specification - Type 24 elements
  • IEC 61158-5-2, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements
  • IEC 61158-5-3, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer service definition - Type 3 elements
  • IEC 61158-5-4, Edition 2.0, Industrial communication networks - Fieldbus specifications - Part 5-4: Application layer service definition - Type 4 elements
  • IEC 61158-5-5, Edition 2.0, Industrial communication networks - Fieldbus specifications - Part 5-5: Application layer service definition - Type 5 elements
  • IEC 61158-5-9, Edition 2.0, Industrial communication networks - Fieldbus specifications - Part 5-9: Application layer service definition - Type 9 elements
  • IEC 61158-5-10, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 5-10: Application layer service definition - Type 10 elements
  • IEC 61158-5-12, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 elements
  • IEC 61158-5-13, Edition 2.0, Industrial communication networks - Fieldbus specifications - Part 5-13: Application layer service definition - Type 13 elements
  • IEC 61158-5-14, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 5-14: Application layer service definition - Type 14 elements
  • IEC 61158-5-19, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 5-19: Application layer service definition - Type 19 elements
  • IEC 61158-5-20, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 5-20: Application layer service definition - Type 20 elements
  • IEC 61158-5-22, Edition 2.0, Industrial communication networks - Fieldbus specifications - Part 5-22: Application layer service definition - Type 22 elements
  • IEC 61158-5-23, Edition 1.0, Industrial communication networks - Fieldbus specifications - Part 5-23: Application layer service definition - Type 23 elements
  • IEC 61158-5-24, Edition 1.0, Industrial communication networks - Fieldbus specifications - Part 5-24: Application layer service definition - Type 24 elements
  • IEC 61158-6-2, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 6-2: Application layer protocol specification - Type 2 elements
  • IEC 61158-6-3, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specification - Type 3 elements
  • IEC 61158-6-4, Edition 2.0, Industrial communication networks - Fieldbus specifications - Part 6-4: Application layer protocol specification - Type 4 elements
  • IEC 61158-6-5, Edition 2.0, Industrial communication networks - Fieldbus specifications - Part 6-5: Application layer protocol specification - Type 5 elements
  • IEC 61158-6-9, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 6-9: Application layer protocol specification - Type 9 elements
  • IEC 61158-6-10, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 elements
  • IEC 61158-6-12, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 6-12: Application layer protocol specification - Type 12 elements
  • IEC 61158-6-13, Edition 2.0, Industrial communication networks - Fieldbus specifications - Part 6-13: Application layer protocol specification - Type 13 elements
  • IEC 61158-6-14, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 6-14: Application layer protocol specification - Type 14 elements
  • IEC 61158-6-19, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 6-19: Application layer protocol specification - Type 19 elements
  • IEC 61158-6-20, Edition 3.0, Industrial communication networks - Fieldbus specifications - Part 6-20: Application layer protocol specification - Type 20 elements
  • IEC 61158-6-22, Edition 2.0, Industrial communication networks - Fieldbus specifications - Part 6-22: Application layer protocol specification - Type 22 elements
  • IEC 61158-6-23, Edition 1.0, Industrial communication networks - Fieldbus specifications - Part 6-23: Application layer protocol specification - Type 23 elements
  • IEC 61158-6-24, Edition 1.0, Industrial communication networks - Fieldbus specifications - Part 6-24: Application layer protocol specification - Type 24 elements
  • IEC 62714-1, Edition 1.0, Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - Part 1: Architecture and general requirements



You can also review my two previous blogs:


Thursday, October 9, 2014

New Dentistry Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Dentistry are now available:


  • BS EN ISO 15841, 2014 Edition, Dentistry. Wires for use in orthodontics
  • BS EN ISO 16443, 2014 Edition, Dentistry. Vocabulary for dental implants systems and related procedure
  • BS EN ISO 16635-2, 2014 Edition, Dentistry. Dental rubber dam instruments. Clamp forceps
  • BS ISO 16635-1, Withdrawn and replaced by BS EN ISO 16635-1, Dentistry. Dental rubber dam technique. Hole punch
  • ISO 15841, 2nd Edition, Dentistry - Wires for use in orthodontics
  • ISO 16443, 1st Edition, Dentistry - Vocabulary for dental implants systems and related procedure
  • ISO 16635-2, 1st Edition, Dentistry - Dental rubber dam instruments - Part 2: Clamp forceps


For more standards like these, please see our Document Center List of Standards on Dentistry.  There will be additional links to the various sub-topics available.

And you'll also want to review my previous blogs: