Monday, November 30, 2015

New Chemical Analysis Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Chemical Analysis are now available:


  • ASTM D2650, 2010 Edition Reapproved in 2015, Standard Test Method for Chemical Composition of Gases by Mass Spectrometry
  • ASTM D5902, 2005 Edition Reapproved in 2015, Standard Test Method for Rubber - Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
  • ASTM D6843, 2010 Edition Reapproved in 2015, Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)
  • ASTM D6854, 2015 Edition, Standard Test Method for Silica-Oil Absorption Number
  • ASTM E1386, 2015 Edition, Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction
  • BS EN 61207-7, Corrigendum 1 for 2013 Edition, Expression of performance of gas analyzers. Tuneable semiconductor laser gas analyzers
  • BS EN ISO 6142, Withdrawn and replaced by BS EN ISO 6142-1, Gas analysis. Preparation of calibration gas mixtures. Gravimetric method
  • BS EN ISO 6142-1, 2015 Edition, Gas analysis. Preparation of calibration gas mixtures. Gravimetric method for Class I mixtures
  • ISO 6142, Withdrawn and replaced by ISO-6142-1, Gas analysis -- Preparation of calibration gas mixtures -- Gravimetric method
  • ISO 6142-1, 1st Edition, Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures
  • ISO 13083, 1st Edition, Surface chemical analysis - Scanning probe microscopy - Standards on the definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes
  • ISO 17109, 1st Edition, Surface chemical analysis - Depth profiling - Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films
  • ISO 18507, 1st Edition, Surface chemical analysis - Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis


For more standards like these, please see our Document Center List of Standards on Chemical Analysis.

Wednesday, November 25, 2015

New Food Technology Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Food Technology are now available:


  • ASTM D5974, 2015 Edition, Standard Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography
  • ASTM E253, 2015a Edition, Standard Terminology Relating to Sensory Evaluation of Materials and Products
  • BS EN 1674, 2015 Edition, Food processing machinery. Dough sheeters. Safety and hygiene requirements
  • BS EN 13870, 2015 Edition, Food processing machinery, Portion cutting machines. Safety and hygiene requirements
  • BS EN ISO 10504, 2015 Edition, Starch derivatives. Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups. Method using high-performance liquid chromatography
  • BS EN ISO 10519, 2015 Edition with Corrigendum 1, Rapeseed. Determination of chlorophyll content. Spectrometric method
  • BS EN ISO 11085, 2015 Edition, Cereals, cereals-based products and animal feeding stuffs. Determination of crude fat and total fat content by the Randall extraction method
  • DIN EN 14108, 2015 Edition, Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of sodium content by atomic absorption spectrometry
  • ISO 10519, 3rd Edition, Rapeseed - Determination of chlorophyll content - Spectrometric method
  • ISO 11085, 2nd Edition, Cereals, cereals-based products and animal feeding stuffs - Determination of crude fat and total fat content by the Randall extraction method
  • ISO 16488, 1st Edition, Marine finfish farms - Open net cage - Design and operation
  • ISO 16541, 1st Edition, Methods for sea lice surveillance on marine finfish farms
  • ISO 16741, 1st Edition, Traceability of crustacean products - Specifications on the information to be recorded in farmed crustacean distribution chains
  • ISO 16779, 1st Edition, Sensory analysis - Assessment (determination and verification) of the shelf life of foodstuffs
  • ISO 17780, 1st Edition, Animal and vegetable fats and oils - Determination of aliphatic hydrocarbons in vegetable oils
  • ISO 18363-1, 1st Edition, Animal and vegetable fats and oils - Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS - Part 1: Method using fast alkaline transesterification and measurement for 3-MCPD and differential measurement for glycidol
  • ISO 18538, 1st Edition, Traceability of molluscan products - Specifications on the information to be recorded in farmed molluscan distribution chains
  • ISO 18539, 1st Edition, Traceability of molluscan products - Specifications on the information to be recorded in captured molluscan distribution chains


For more documents like these, please see our Document Center List of Standards on Food Technology.

And today at StandardsForum.com I have posted about Food Safety Standards News.  Take a look!

Tuesday, November 24, 2015

New Textile Fabric Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Textile Fabrics are now available:


  • ASTM D1777, 1996 Edition Reapproved in 2015, Standard Test Method for Thickness of Textile Materials
  • ASTM D3050, 2007 Edition Reapproved in 2015, Standard Guide for Measuring Soil Removal from Artificially Soiled Fabrics (Not Suitable for Detergent Ranking)
  • ASTM D3511, 2015 Edition, Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
  • ASTM D3787, 2015 Edition, Standard Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test
  • ASTM D3885, 2007a Edition Reapproved in 2015, Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
  • ASTM D3886, 1999 Edition Reapproved in 2015, Standard Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus)
  • ASTM D4685, 2015 Edition, Standard Test Method for Pile Fabric Abrasion
  • ASTM D5035, 2011 Edition Reapproved in 2015, Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
  • ASTM D5587, 2015 Edition, Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
  • ASTM D6413, 2015 Edition, Standard Test Method for Flame Resistance of Textiles (Vertical Test)
  • ASTM D6479, 2015 Edition, Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints
  • ASTM D6614, 2007 Edition Reapproved in 2015, Standard Test Method for Stretch Properties of Textile Fabrics - CRE Method
  • ASTM D6770, 2007 Edition Reapproved in 2015, Standard Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method)
  • ASTM D6797, 2015 Edition, Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
  • ASTM D6828, 2002 Edition Reapproved in 2015, Standard Test Method for Stiffness of Fabric by Blade/Slot Procedure
  • ISO 17608, 1st Edition, Textiles - Bare elastane yarns - Determination of resistance to chlorinated water (swimming-pool water)


For more standards like these, please see our Document Center List of Standards on Textile Fabrics.

Monday, November 23, 2015

New Agricultural Machines, Implements and Equipment Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on  Agricultural Machines, Implements and Equipment are now available:


  • ASTM D5093, 2015 Edition, Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
  • ASTM E1519, 2015a Edition, Standard Terminology Relating to Agricultural Tank Mix Adjuvants
  • BS EN ISO 16231-2, 2015 Edition, Self-propelled agricultural machinery. Assessment of stability. Determination of static stability and test procedures
  • BS EN ISO 17962, 2015 Edition, Agricultural machinery. Equipment for sowing. Minimization of the environmental effects of fan exhaust from pneumatic systems
  • ISO 789-3, 3rd Edition, Agricultural tractors - Test procedures - Part 3: Turning and clearance diameters
  • ISO 3600, 4th Edition, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Operators manuals - Content and format
  • ISO 5131, 3rd Edition, Tractors for agriculture and forestry - Measurement of noise at the operators position - Survey method
  • ISO 6535, 4th Edition, Portable chain-saws - Chain brake performance
  • ISO 11783-10, 2nd Edition, Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 10: Task controller and management information system data interchange
  • ISO 16230-1, 1st Edition, Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements
  • ISO 16231-2, 1st Edition, Self-propelled agricultural machinery - Assessment of stability - Part 2: Determination of static stability and test procedures
  • ISO 17962, 1st Edition, Agricultural machinery - Equipment for sowing - Minimization of the environmental effects of fan exhaust from pneumatic systems
  • ISO 19858, 1st Edition, Forestry machines - Portable chain-saws - Test method for evaluating saw chain oil lubricity


Friday, November 20, 2015

New Sports Equipment And Facility Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Sports Equipment And Facilities are now available:


  • ASTM F381, 2015 Edition, Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
  • ASTM F910, 2004 Edition Reapproved in 2015, Standard Specification for Face Guards for Youth Baseball
  • ASTM F1081, 2009 Edition Reapproved in 2015, Standard Specification for Competition Wrestling Mats
  • ASTM F1107, 2004 Edition Reapproved in 2015, Standard Terminology Relating to Snowboarding
  • ASTM F1492, 2015 Edition, Standard Specification for Helmets Used in Skateboarding and Trick Roller Skating
  • ASTM F1722, 2015 Edition, Standard Test Method for Determining Mass and Moment of Inertia of Alpine Skis
  • ASTM F1882, 2015 Edition, Standard Specification for Residential Basketball Systems
  • ASTM F2225, 2015 Edition, Standard Safety Specification for Consumer Trampoline Enclosures
  • ASTM F2571, 2011 Edition Reapproved in 2015, Standard Specification for Paintball Marker Barrel Blocking Devices
  • BS EN 16582-1, 2015 Edition, Domestic swimming pools. General requirements including safety and test methods
  • BS EN 16582-2, 2015 Edition, Domestic swimming pools. Specific requirements including safety and test methods for inground pools
  • BS EN 16582-3, 2015 Edition, Domestic swimming pools. Specific requirements including safety and test methods for aboveground pools
  • BS EN 16664, 2015 Edition, Playing field equipment. Lightweight goals. Functional, safety requirements and test methods
  • PAS 520, 2015 Edition, Safeguarding 0 to 4 year old children within the teaching of swimming, including any associated professional photography. Code of practice
  • ISO 8783, 2nd Edition, Alpine skis - Guidelines for conducting slope performance tests
  • ISO 9523, 3rd Edition, Touring ski-boots for adults - Interface with touring ski-bindings - Requirements and test methods
  • ISO 9838, 3rd Edition, Alpine and touring ski-bindings - Test soles for ski-binding tests
  • ISO 11087, 3rd Edition, Alpine ski-bindings - Retention devices - Requirements and test methods
  • ISO 11110, 2nd Edition, Winter-sports equipment - Test devices for the setting of the functional unit ski/boot/binding - Requirements and tests
  • SS EN 16582-1, 2015 Edition, Domestic swimming pools. General requirements including safety and test methods (English Language)
  • SS EN 16582-2, 2015 Edition, Domestic swimming pools. Specific requirements including safety and test methods for inground pools (English Language)
  • SS EN 16582-3, 2015 Edition, Domestic swimming pools. Specific requirements including safety and test methods for aboveground pools (English Language)
  • SS EN 16664, 2015 Edition, Playing field equipment. Lightweight goals. Functional, safety requirements and test methods (English Language)


For more standards like these, please see our Document Center List of Standards on Sports Equipment And Facilities.

You can also review my previous post:

Thursday, November 19, 2015

New FDA Medical Device Guidance Documents for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following FDA Medical Device Guidance Documents are now available:




You may also want to review my previous post:

Wednesday, November 18, 2015

New Semiconductor Standards for 2015

Document Center Inc. is pleased to announce that the following New Standards on Semiconductor Devices are now available:


  • BS EN 60747-5-5, 2011 Edition with Amendment A1, Semiconductor devices. Discrete devices. Optoelectronic devices. Photocouplers
  • BS EN 62007-1, 2015 Edition, Semiconductor optoelectronic devices for fibre optic system applications. Specification template for essential ratings and characteristics
  • BS EN 62031, 2008 Edition with Amendment A2, LED modules for general lighting. Safety specifications
  • BS EN 62047-15, 2015 Edition, Semiconductor devices. Micro-electromechanical devices. Test method of bonding strength between PDMS and glass
  • BS EN 62047-16, 2015 Edition, Semiconductor devices. Micro-electromechanical devices. Test methods for determining residual stresses of MEMS films. Wafer curvature and cantilever beam deflection methods
  • BS EN 62047-17, 2015 Edition, Semiconductor devices. Micro-electromechanical devices. Bulge test method for measuring mechanical properties of thin films
  • IEC 60700-1, Edition 2.0, Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
  • IEC 62007-1, Edition 3.0, Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics
  • IEC 62047-15, Edition 1.0, Semiconductor devices - Micro-electromechanical devices - Part 15: Test method of bonding strength between PDMS and glass
  • IEC 62047-16, Edition 1.0, Semiconductor devices - Micro-electromechanical devices - Part 16: Test methods for determining residual stresses of MEMS films - Wafer curvature and cantilever beam deflection methods
  • IEC 62047-17, Edition 1.0, Semiconductor devices - Micro-electromechanical devices - Part 17: Bulge test method for measuring mechanical properties of thin films


For more standards like these, please see our Document Center List of Standards on Semiconductor Devices.

Tuesday, November 17, 2015

New Fastener Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Fasteners are now available:


  • ASME B18.2.2, 2015 Edition, Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts (Inch Series)
  • ASME B18.24, 2015 Edition, Part Identifying Number (PIN) Code System Standard for B18 Fastener Products
  • ASTM A502, 2003 Edition Reapproved in 2015, Standard Specification for Rivets, Steel, Structural
  • ASTM A563, 2015 Edition, Standard Specification for Carbon and Alloy Steel Nuts
  • ASTM A1078, 2012 Edition with Editorial Correction, Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement
  • ASTM F879, 2015 Edition, Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
  • ASTM F2282, 2003 Edition Reapproved in 2015, Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners


For more standards like these, please see our Document Center List of Standards on Fasteners.

Monday, November 16, 2015

New Environmental Protection Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Environmental Protection are now available:


  • ASTM C1512, 2010 Edition Reapproved in 2015 with an Editorial Correction, Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
  • ASTM D6044, 1996 Edition Reapproved in 2015, Standard Guide for Representative Sampling for Management of Waste and Contaminated Media
  • ASTM E2101, 2015 Edition, Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer
  • ASTM F2576, 2015a Edition, Standard Terminology Relating to Declarable Substances in Materials
  • BS EN 62321-6, 2015 Edition, Determination of certain substances in electrotechnical products. Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS)
  • BS EN ISO 14001, 2015 Edition, Environmental management systems. Requirements with guidance for use
  • BS EN ISO 14045, Corrigendum 1 for 2012 Edition, Environmental management. Eco-efficiency assessment of product systems. Principles, requirements and guidelines
  • IEC 60050-904, Amendment 1 for Edition 1.0, International Electrotechnical Vocabulary - Part 904: Environmental standardization for electrical and electronic products and systems
  • IEC 62321-6, Edition 1.0, Determination of certain substances in electrotechnical products - Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatograhy -mass spectometry (GC-MS)
  • IEC 62321-7-1, Edition 1.0, Determination of certain substances in electrotechnical products - Part 7-1: Hexavalent chromium - Presence of hexavalent chromium (Cr(VI)) in colourless and coloured corrosion-protected coatings on metals by the colorimetric method
  • ISO 13065, 1st Edition, Sustainability criteria for bioenergy
  • ISO 14001, 3rd Edition, Environmental management systems - Requirements with guidance for use


For more standards like these, please see our Document Center List of Standards on Environmental Protection.

Friday, November 13, 2015

New Sterilization and Disinfection Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Sterilization and Disinfection are now available:


  • ASTM E1173, 2015 Edition, Standard Test Method for Evaluation of Preoperative, Precatheterization, or Preinjection Skin Preparations
  • BS EN 556-2, 2015 Edition, Sterilization of medical devices. Requirements for medical devices to be designated 'STERILE'. Requirements for aseptically processed medical devices
  • BS EN 14476, 2013 Edition with Amendment A1, Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of virucidal activity in the medical area. Test method and requirements (Phase 2/Step 1)
  • BS EN 14885, 2015 Edition, Chemical disinfectants and antiseptics. Application of European Standards for chemical disinfectants and antiseptics
  • BS EN 16616, 2015 Edition, Chemical disinfectants and antiseptics. Chemical-thermal textile disinfection. Test method and requirements (phase 2, step 2)
  • BS EN 61010-031, 2015 Edition, Safety requirements for electrical equipment for measurement, control and laboratory use. Safety requirements for hand-held probe assemblies for electrical measurement and test
  • BS EN 61010-2-040, 2015 Edition, Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
  • BS EN ISO 11137-1, 2015 Edition, Sterilization of health care products. Radiation. Requirements for development, validation and routine control of a sterilization process for medical devices
  • BS EN ISO 11137-2, 2015 Edition, Sterilization of health care products. Radiation. Establishing the sterilization dose
  • BS EN ISO 13408-1, 2015 Edition, Aseptic processing of health care products. General requirements
  • BS EN ISO 13408-7, Corrigendum 1 for 2013 Edition, Aseptic processing of health care products. Alternative processes for medical devices and combination products
  • BS EN ISO 15883-6, 2015 Edition, Washer-disinfectors. Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive, non-critical medical devices and healthcare equipment
  • SS EN 14476, 2013 Edition with Amendment A1, Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of virucidal activity in the medical area. Test method and requirements (Phase 2/Step 1)
  • SS EN 14885, 2015 Edition, Chemical disinfectants and antiseptics. Application of European Standards for chemical disinfectants and antiseptics
  • SS EN 16616, 2015 Edition, Chemical disinfectants and antiseptics. Chemical-thermal textile disinfection. Test method and requirements (phase 2, step 2)
  • SS EN ISO 11137-1, 2015 Edition, Sterilization of medical devices. Requirements for medical devices to be designated 'STERILE'. Requirements for aseptically processed medical devices
  • SS EN ISO 11137-2, 2015 Edition, Sterilization of health care products. Radiation. Establishing the sterilization dose
  • SS EN ISO 13408-12015 Edition, Aseptic processing of health care products. General requirements


For more standards like these, please see our Document Center List of Standards on Sterilization and Disinfection (for Healthcare).

Wednesday, November 4, 2015

New Dentistry Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Dentistry are now available:


  • BS EN ISO 3630-3, 2015 Edition, Dentistry. Endodontic instruments. Compactors: pluggers and spreaders
  • BS EN ISO 4823, 2015 Edition, Dentistry. Elastomeric impression materials
  • BS EN ISO 6874, 2015 Edition, Dentistry. Polymer-based pit and fissure sealants
  • BS EN ISO 12836, 2015 Edition, Dentistry. Digitizing devices for CAD/CAM systems for indirect dental restorations. Test methods for assessing accuracy
  • BS EN ISO 13397-5, 2015 Edition, Dentistry. Periodontal curettes, dental scalers and excavators. Jacquette scalers
  • BS EN ISO 16408, 2015 Edition, Dentistry. Oral care products. Oral rinses
  • BS EN ISO 16954, 2015 Edition, Dentistry. Test methods for dental unit waterline biofilm treatment
  • BS EN ISO 17937, 2015 Edition, Dentistry. Osteotome
  • BS EN ISO 22794, Corrigendum for 2009 Edition, Dentistry. Implantable materials for bone filling and augmentation in oral and maxillofacial surgery. Contents of a technical file
  • DIN EN ISO 7494-2, 2015 Edition, Dentistry - Dental units - Part 2: Air, water, suction and wastewater systems (English language edition)
  • DIN EN ISO 24234, 2015 Edition, Dentistry - Dental amalgam (English language edition)
  • ISO 3630-3, 2nd Edition, Dentistry - Endodontic instruments - Part 3: Compactors: pluggers and spreaders
  • ISO 4823, 4th Edition, Dentistry - Elastomeric impression materials
  • ISO 6874, 3rd Edition, Dentistry - Polymer-based pit and fissure sealants
  • ISO 12836, 2nd Edition, Dentistry - Digitizing devices for CAD/CAM systems for indirect dental restorations - Test methods for assessing accuracy
  • ISO 10650, 1st Edition, Dentistry - Powered polymerization activators
  • ISO 10650-1, Withdrawn and replaced by ISO 10650, Dentistry -- Powered polymerization activators -- Part 1: Quartz tungsten halogen lamps
  • ISO 10650-2, Withdrawn and replaced by ISO 10650, Dentistry -- Powered polymerization activators -- Part 2: Light-emitting diode (LED) lamps
  • ISO 13397-5, 1st Edition, Dentistry - Periodontal curettes, dental scalers and excavators - Part 5: Jacquette scalers
  • ISO 17937, 1st Edition, Dentistry - Osteotome


For more standards like these, please see our Document Center List of Standards on Dentistry.

And you can also take a look at my previous post:

Tuesday, November 3, 2015

New Road Vehicle Engineering Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Road Vehicle Engineering are now available:


  • ASTM F2641, 2008 Edition Reapproved in 2015, Standard Consumer Safety Specification for Recreational Powered Scooters and Pocket Bikes
  • ASTM F26422008 Edition Reapproved in 2015, Standard Consumer Safety Specification for Safety Instructions and Labeling for Recreational Powered Scooters and Pocket Bikes
  • BS EN 13594, 2015 Edition, Protective gloves for motorcycle riders. Requirements and test methods
  • BS EN 15430-1, 2015 Edition, Winter and road service area maintenance equipments. Data acquisition and transmission. In-vehicle data acquisition
  • BS EN 15436-2, 2015 Edition, Road service area maintenance equipment. Performance assessment
  • BS EN 15436-3, 2015 Edition, Road service area maintenance equipment. Classification
  • BS EN ISO 4210-2, 2015 Edition, Cycles. Safety requirements for bicycles. Requirements for city and trekking, young adult, mountain and racing bicycles
  • BS EN ISO 4210-6, 2015 Edition, Cycles. Safety requirements for bicycles. Frame and fork test methods
  • BS EN ISO 15118-1, Corrigendum 2 for 2013 Edition, Road vehicles. Vehicle to grid communication interface. General information and use-case definition
  • IEC 61851-24, Corrigendum for Edition 1.0, Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging
  • IEC 61980-1, Edition 1.0, Electric vehicle wireless power transfer (WPT) systems - Part 1: General requirements
  • ISO 4210-2, 2nd Edition, Cycles - Safety requirements for bicycles - Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles
  • ISO 4210-6, 2nd Edition, Cycles - Safety requirements for bicycles - Part 6: Frame and fork test methods
  • ISO 6469-4, 1st Edition, Electrically propelled road vehicles - Safety specifications - Part 4: Post crash electrical safety
  • ISO 6487, 6th Edition, Road vehicles - Measurement techniques in impact tests - Instrumentation
  • ISO 10865-2, 1st Edition, Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers - Part 2: Systems for forward-facing wheelchair-seated passengers
  • ISO 12349-1, 2nd Edition, Road vehicles - Dummies for restraint system testing - Part 1: Adult dummies
  • ISO 17840-1, Road vehicles - Information for first and second responders - Part 1: Rescue sheet for passenger cars and light commercial vehicles


For more standards like these please see our Document Center List of Standards on Road Vehicles

You can also take a look at my previous post: