Friday, September 30, 2016

New Aluminum Products Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Aluminum Products are now available;


  • ASTM B415, 2016 Edition, Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire
  • ASTM B595, 2011 Edition Reapproved in 2016, Standard Specification for Sintered Aluminum Structural Parts
  • ASTM B941, 2016 Edition, Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
  • BS EN 754-7, 2016 Edition, Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Seamless tubes, tolerances on dimensions and form
  • BS EN 754-8, 2016 Edition, Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Porthole tubes, tolerances on dimensions and form
  • BS EN 755-1, 2016 Edition, Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Technical conditions for inspection and delivery
  • BS EN 755-7, 2016 Edition, Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Seamless tubes, tolerances on dimensions and form
  • BS EN 755-8, 2016 Edition, Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Porthole tubes, tolerances on dimensions and form
  • BS EN 755-9, 2016 Edition, Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Profiles, tolerances on dimensions and form


For more standards like these, please refer to our Document Center List of Standards on Aluminum Products.

Thursday, September 29, 2016

New Vibrations, Shock, And Vibration Measurements Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Vibrations, Shock, And Vibration Measurements are now available;


  • BS ISO 16063-17, 2016 Edition, Methods for the calibration of vibration and shock transducers. Primary calibration by centrifuge
  • BS ISO 29821-2, 2016 Edition, Condition monitoring and diagnostics of machines. Ultrasound. Procedures and validation
  • DIN ISO 13373-2, 2016 Edition, Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data
  • ISO 16063-17, 1st Edition, Methods for the calibration of vibration and shock transducers - Part 17: Primary calibration by centrifuge
  • PD 6585-2, Withdrawn and Replaced by PD CEN 1030-2, Hand-arm vibration. Guidelines for vibration hazards reduction. Management measures at the workplace
  • PD CEN 1030-2, Hand-arm vibration. Guidelines for vibration hazards reduction. Management measures at the workplace


Wednesday, September 28, 2016

New Acoustics in Building and Sound Insulation Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Acoustics in Building and Sound Insulation are now available;


  • ASTM C367, 2016 Edition, Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels
  • ASTM C384, 2004 Edition Reapproved in 2016, Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
  • ASTM C522, 2003 Edition Reapproved in 2016, Standard Test Method for Airflow Resistance of Acoustical Materials
  • ASTM E413, 2016 Edition, Classification for Rating Sound Insulation
  • ASTM E492, 2009 Edition Reapproved in 2016 with Editorial Correction, Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
  • ASTM E795, 2016 Edition, Standard Practices for Mounting Test Specimens During Sound Absorption Tests
  • ASTM E2179, 2003 Edition Reapproved in 2016, Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors
  • ASTM E2249, 2002 Edition Reapproved in 2016, Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity


For more standards like these, please refer to our Document Center List of Standards on Acoustics in Building and Sound Insulation.

Tuesday, September 27, 2016

New Industrial Process Measurement and Control Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Industrial Process Measurement and Control are now available;


  • BS EN 61987-12, 2016 Edition, Industrial-process measurement and control. Data structures and elements in process equipment catalogues. Lists of properties (LOPs) for flow measuring equipment for electronic data exchange
  • BS EN 61987-12, 2016 Edition, Industrial-process measurement and control. Data structures and elements in process equipment catalogues. Lists of properties (LOP) for Pressure Measuring Equipment for electronic data exchange
  • BS EN 62601, 2016 Edition, Industrial networks. Wireless communication network and communication profiles. WIA-PA
  • BS IEC 62601, Withdrawn and Replaced by BS EN 62601, Industrial communication networks. Fieldbus specifications. WIA-PA communication network and communication profile
  • IEC 61003-1, Edition 3.0, Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 1: Methods for evaluating performance
  • IEC 61003-2, Edition 2.0, Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 2: Guidance for inspection and routine testing
  • IEC 61069-1, Edition 2.0, Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts
  • IEC 61069-2, Edition 2.0, Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology
  • IEC 61069-3, Edition 2.0, Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality
  • IEC-61069-4, Edition 2.0, Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 4: Assessment of system performance
  • IEC 61069-5, Edition 2.0, Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 4: Assessment of system performance
  • IEC 61069-6, Edition 2.0, Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 6: Assessment of system operability
  • IEC 61069-7, Edition 2.0, Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety
  • IEC 61069-8, Edition 2.0, Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of other system properties
  • IEC 61557-9, Edition 3.0, Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems
  • IEC 61784-3, Edition 3.0, Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions
  • IEC 61987-14, Edition 1.0, Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 14: Lists of properties (LOP) for temperature measuring equipment for electronic data exchange
  • IEC 62453-41, Edition 2.0, Field device tool (FDT) interface specification - Part 41: Object model integration profile - Common object model
  • IEC 62453-42, Edition 1.0, Field device tool (FDT) interface specification - Part 42: Object model integration profile - Common Language Infrastructure
  • IEC 62453-301, Edition 1.1, Field device tool (FDT) interface specification - Part 301: Communication profile integration - IEC 61784 CPF 1
  • IEC 62453-301-AM1, Amendment 1 for Edition 1.0, Amendment 1 - Field device tool (FDT) interface specification - Part 301: Communication profile integration - IEC 61784 CPF 1
  • IEC 62453-302, Edition 2.0, Field device tool (FDT) interface specification - Part 302: Communication profile integration - IEC 61784 CPF 2
  • IEC 62453-303-1-AM1, Amendment 1 for Edition 1.0, Amendment 1 - Field device tool (FDT) interface specification - Part 303-1: Communication profile integration - IEC 61784 CP 3/1 and CP 3/2
  • IEC 62453-303-2-AM1, Amendment 1 for Edition 1.0, Amendment 1 - Field device tool (FDT) interface specification - Part 303-2: Communication profile integration - IEC 61784 CP 3/4, CP 3/5 and CP 3/6
  • IEC 62453-309, Edition 2.0, Field device tool (DFT) interface specification - Part 309: Communication profile integration - IEC 61784 CPF 9
  • IEC 62453-315, Edition 1.1, Field device tool (FDT) Interface specification - Part 315: Communication profile integration - IEC 61784 CPF 15 
  • IEC 62453-315-AM1, Amendment 1 for Edition 1.0, Amendment1 - Field device tool (FDT) Interface specification - Part 315: Communication profile integration - IEC 61784 CPF 15
  • IEC 62591, Edition 2.0, Industrial networks - Wireless communication network and communication profiles - WirelessHART
  • PD IEC 62453-42, 2016 Edition, Field device tool (FDT) interface specification. Object model integration profile. Common Language Infrastructure



For more standards like these, please refer to our Document Center List of Standards on Industrial Process Measurement and Control.

Monday, September 26, 2016

New Binders and Sealing Materials Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Binders and Sealing Materials are now available;


  • ASTM D140, 2016 Edition, Standard Practice for Sampling Asphalt Materials
  • ASTM D312, 2016 Edition, Standard Specification for Asphalt Used in Roofing
  • ASTM D3462, 2016 Edition, Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
  • ASTM D3805, 2016 Edition, Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings
  • ASTM D7492, 2016 Edition, Standard Guide for Use of Drainage System Media with Waterproofing Systems
  • ASTM E102, 1993 Edition Reapproved in 2016, Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
  • ASTM F1306, 2016 Edition, Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
  • BS EN 12039, 2016 Edition, Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of adhesion of granules
  • BS EN 13719, 2016 Edition, Geosynthetics. Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers


For more standards like these, please refer to our Document Center List of Standards on Binders and Sealing Materials.

Wednesday, September 21, 2016

New Chemicals for Purification of Water Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Chemicals for Purification of Water are now available;


  • BS EN 878, 2016 Edition, Chemicals used for treatment of water intended for human consumption. Aluminium sulfate
  • BS EN 882, 2016 Edition, Chemicals used for treatment of water intended for human consumption. Sodium aluminate
  • BS EN 887, 2016 Edition, Chemicals used for treatment of water intended for human consumption. Aluminium iron (III) sulfate
  • BS EN 902, 2016 Edition, Chemicals used for treatment of water intended for human consumption. Hydrogen peroxide
  • BS EN 938, 2016 Edition, Chemicals used for treatment of water intended for human consumption. Sodium chlorite
  • BS EN 939, 2016 Edition, Chemicals used for treatment of water intended for human consumption. Hydrochloric acid


For more standards like these, please refer to our Document Center List of Standards on Chemicals for Purification of Water.



Tuesday, September 20, 2016

New Flat Steel Products and Semi-Products Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Flat Steel Products and Semi-Products are now available;


  • ASTM A67, 2000 Edition Reapproved in 2016, Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked
  • ASTM A424, 2009A Edition Reapproved in 2016, Standard Specification for Steel, Sheet, for Porcelain Enameling
  • ASTM A480, 2016A Edition, Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
  • ASTM A506, 2016 Edition, Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
  • ASTM A507, 2016 Edition, Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
  • ASTM A653, 2015 Edition with Editorial Correction, Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
  • ASTM A677, 2016 Edition, Standard Specification for Nonoriented Electrical Steel Fully Processed Types
  • ASTM A683, 2016 Edition, Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
  • ASTM A720, 2002 Edition Reapproved 2016 with Editorial Correction, Standard Test Method for Ductility of Nonoriented Electrical Steel
  • ASTM A721, 2002 Edition Reapproved in 2016, Standard Test Method for Ductility of Oriented Electrical Steel
  • ASTM A1087, 2016 Edition, Standard Practice for Using Hand Calipers to Measure the Width of Steel Sheet
  • ASTM B435, 2006 Edition Reapproved in 2016, Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
  • ASTM B463, 2010 Edition Reapproved in 2016, Standard Specification for UNS N08020 Alloy Plate, Sheet, and Strip
  • ASTM E646, 2016 Edition, Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials


For more standards like these, please refer to our Document Center List of Standards on Flat Steel Products and Semi-Products.

Monday, September 19, 2016

New Thermal and Sound Insulating Materials Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Thermal and Sound Insulating Materials are now available;


  • ASTM C591, 2016 Edition, Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
  • ASTM C728, 2016 Edition, Standard Specification for Perlite Thermal Insulation Board
  • ASTM C991, 2016 Edition, Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings
  • BS EN 13166, 2012 Edition with Amendment 2 Interfiled, Thermal insulation products for buildings. Factory made phenolic foam (PF) products. Specification
  • BS EN 16724, 2016 Edition, Thermal insulation products for building applications. Instructions for mounting and fixing for determination of the reaction to fire testing of external thermal Insulation composite systems (ETICS)


For more standards like these, please refer to our Document Center List of Standards on Thermal and Sound Insulating Materials.

Friday, September 16, 2016

New Sports Equipment and Facilities Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Sports Equipment and Facilities are now available;


  • ASTM F969, 2011 Edition Reapproved in 2016, Standard Practice for Construction of Chain-Link Tennis Court Fence
  • ASTM F2553, 2016 Edition, Standard Specification for Warnings on Refillable CO2 Cylinders Used In the Sport of Paintball
  • ASTM F2631, Withdrawn Without Replacement, Standard Practice for Installation of Chain-Link Fence for Outdoor Sports Fields, Sports Courts and Other Recreation Facilities (Withdrawn 2016)
  • ASTM F2856, 2012 Edition Reapproved in 2016, Standard Practice for Transfilling and Safe Handling of Small CO2 Cylinders for Use in Paintball
  • ASTM F2959, 2016 Edition, Standard Practice for Aerial Adventure Courses
  • BS EN 12503-2, 2016 Edition, Sports mats. Pole vault and high jump mats, safety requirements
  • BS EN 12503-4, 2016 Edition, Sports mats. Determination of shock absorption
  • DIN ISO 8061, 2016 Edition, Unplasticized polyvinyl chloride (PVC-U) pipes - General quality requirements, testing
  • DIN ISO 10958-2, 2016 Edition, Snowboards - Binding mounting area - Part 2: Requirements and test methods for snowboards with inserts
  • DIN ISO 11087, 2016 Edition, Alpine ski-bindings - Retention devices - Requirements and test methods
  • PD CEN 16879, 2016 Edition, Siting of Playground and other recreational facilities. Advice on methods for positioning and separation


For more standards like these, please refer to our Document Center List of Standards on Sports Equipment and Facilities.

Thursday, September 15, 2016

New Animal and Vegetable Fats and Oils Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Animal and Vegetable Fats and Oils are now available;


  • BS EN ISO 662, 2016 Edition, Animal and vegetable fats and oils. Determination of moisture and volatile matter content
  • BS EN ISO 9936, 2016 Edition, Animal and vegetable fats and oils. Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography
  • BS EN ISO 12966-3, 2016 Edition, Animal and vegetable fats and oils. Gas chromatography of fatty acid methyl esters. Preparation of methyl esters using trimethylsulfonium hydroxide (TMSH)
  • BS EN ISO 15753, 2016 Edition, Animal and vegetable fats and oils. Determination of polycyclic aromatic hydrocarbons
  • BS ISO 21033, 2016 Edition, Animal and vegetable fats and oils. Determination of trace elements by inductively coupled plasma optical emission spectroscopy (ICP-OES)
  • ISO 662, 3rd Edition, Animal and vegetable fats and oils - Determination of moisture and volatile matter content
  • ISO 12966-3, 2nd Edition, Animal and vegetable fats and oils - Gas chromatography of fatty acid methyl esters - Part 3: Preparation of methyl esters using trimethylsulfonium hydroxide (TMSH)
  • ISO 15753, 2nd Edition, Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons
  • ISO-21033, 2nd Edition, Animal and vegetable fats and oils - Determination of trace elements by inductively coupled plasma optical emission spectroscopy (ICP-OES)
  • PD ISO 21033, Withdrawn and Replaced by BS ISO 21033, Animal and vegetable fats and oils. Determination of trace elements by inductively coupled plasma optical emission spectroscopy (ICP-OES)


For more standards like these, please refer to our Document Center List of Standards on Animal and Vegetable Fats and Oils

Wednesday, September 14, 2016

New Earth-Moving Machinery Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Earth-Moving Machinery are now available;

  • BS ISO 8812, 2016 Edition, Earth-moving machinery. Backhoe loaders. Terminology and commercial specifications
  • BS ISO 9244, 2008 Edition with Amenment 1, Earth-moving machinery. Machine safety labels. General principles
  • BS ISO 12117-2, 2008 Edition with Amendment 1, Earth-moving machinery. Laboratory tests and performance requirements for protective structures of excavators. Roll-over protective structures (ROPS) for excavators of over 6 t
  • BS ISO 13031, 2016 Edition, Earth-moving machinery. Quick couplers. Safety
  • ISO 8812, 2nd Edition, Earth-moving machinery - Backhoe loaders - Terminology and commercial specifications
  • ISO 9244-AM1, Amendment 1 for the 2nd Edition, AMENDMENT 1, Earth-moving machinery - Machine safety labels - General principles
  • ISO 12117-2-AM1, Amendment 1 for the 1st Edition, AMENDMENT 1, Part 2: Roll-over protective structures (ROPS) for excavators of over 6 t, Earth-moving machinery - Laboratory tests and performance requirements for protective structures of excavators
  • ISO 13031, 1st Edition, Earth-moving machinery - Quick couplers - Safety


For more standards like these, please refer to our Document Center List of Standards on Earth-Moving Machinery.

Tuesday, September 13, 2016

New Small Kitchen Appliances Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Small Kitchen Appliances are now available;


  • BS EN 16889, 2016 Edition, Food hygiene. Production and dispense of hot beverages from hot beverage appliances. Hygiene requirements, migration test
  • BS EN 60335-2-14, 2006 Edition with Amendment 12, Household and similar electrical appliances. Safety. Particular requirements for kitchen machines
  • BS EN 60335-2-15, 2016 Edition, Household and similar electrical appliances. Safety. Particular requirements for appliances for heating liquids
  • BS EN 60335-2-37, 2012 Edition with Amendment 12, Household and similar electrical appliances. Safety. Particular requirements for commercial electric deep fat fryers
  • IEC 60335-2-13-1, Amendment 1 for Edition 6.0, Amendment 1 - Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances
  • IEC 60335-2-14, Edition 6.0, Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines
  • IEC 60335-2-15-1, Amendment 1 for Edition 6.0, Amendment 1 - Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids
  • IEC 60335-2-23, Edition 6.0, Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care


For more standards like these, please refer to our Document Center List of Standards on Small Kitchen Appliances.

Monday, September 12, 2016

New Respiratory Protective Devices Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Respiratory Protective Equipment are now available;


  • BS ISO 16900-12, 2016 Edition, Respiratory protective devices. Methods of test and test equipment. Determination of volume-averaged work of breathing and peak respiratory pressures
  • ISO 16900-12, 1st Edition, Respiratory protective devices - Methods of test and test equipment - Part 12: Determination of volume-averaged work of breathing and peak respiratory pressures
  • ISO 16973, 1st edition, Respiratory protective devices - Classification for respiratory protective device (RPD), excluding RPD for underwater application
  • ISO 16975-1, 1st Edition, Respiratory protective devices - Selection, use and maintenance - Part 1: Establishing and implementing a respiratory protective device programme
  • ISO 16975-2, 1st Edition, Respiratory protective devices - Selection, use and maintenance - Part 2: Condensed guidance to establishing and implementing a respiratory protective device programme
  • PD ISO 16973, 2016 Edition, Respiratory protective devices. Classification for respiratory protective device (RPD), excluding RPD for underwater application


For more standards like these, please refer to our Document Center List of Standards on Respiratory Protective Devices.

Thursday, September 8, 2016

New Microbiology Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Microbiology are now available;


  • ASTM D5465, 2016 Edition, Standard Practice for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods
  • ASTM D7463, 2016 Edition, Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
  • ASTM E2186, 2002A Edition Reapproved in 2016, Standard Guide for Determining DNA Single-Strand Damage in Eukaryotic Cells Using the Comet Assay
  • ASTM E2783, 2011 Edition Reapproved in 2016, Standard Test Method for Assessment of Antimicrobial Activity for Water Miscible Compounds Using a Time-Kill Procedure
  • ASTM F1608, 2016 Edition, Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)
  • ASTM F895, 2011 Edition Reapproved in 2016, Standard Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity
  • ASTM F2149, 2016 Edition, Standard Test Method for Automated Analyses of Cells - the Electrical Sensing Zone Method of Enumerating and Sizing Single Cell Suspensions
  • BS EN 14065, 2016 Edition, Textiles. Laundry processed textiles. Biocontamination control system
  • BS EN ISO 18744, 2016 Edition, Microbiology of the food chain. Detection and enumeration of Cryptosporidium and Giardia in fresh leafy green vegetables and berry fruits
  • ISO 16140-1, 1st Edition, Microbiology of the food chain - Method validation - Part 1: Vocabulary
  • ISO 16140-2, 1st Edition, Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method
  • ISO 17468, 1st Edition, Microbiology of the food chain - Technical requirements and guidance on establishment or revision of a standardized reference method
  • ISO 18744, 1st Edition, Microbiology of the food chain - Detection and enumeration of Cryptosporidium and Giardia in fresh leafy green vegetables and berry fruits
  • ISO 19838, 1st Edition, Microbiology - Cosmetics - Guidelines for the application of ISO standards on Cosmetic Microbiology
  • PD CEN 15634-3, 2016 Edition, Foodstuffs. Detection of food allergens by molecular biological methods. Hazelnut (Corylus avellana). Qualitative detection of a specific DNA sequence in chocolate by real-time PCR
  • PD CEN 15634-4, 2016 Edition, Foodstuffs. Detection of food allergens by molecular biological methods. Peanut (Arachis hypogaea). Qualitative detection of a specific DNA sequence in chocolate by real-time PCR
  • PD CEN ISO 19838, 2016 Edition, Microbiology. Cosmetics. Guidelines for the application of ISO standards on Cosmetic Microbiology


For more standards like these, please refer to our Document Center List of Standards on Microbiology.

Wednesday, September 7, 2016

New Radiation Measurements Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Radiation Measurements are now available;


  • BS EN ISO 16641, 2016 Edition, Measurement of radioactivity in the environment. Air. Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors
  • BS EN ISO 18589-7, Corrigendum 1 for the 2014 Edition, Measurement of radioactivity in the environment. Soil. In situ measurement of gamma-emitting radionuclides
  • BS ISO 11665-11, 2016 Edition, Measurement of radioactivity in the environment. Air: radon-222. Test method for soil gas with sampling at depth
  • ISO-11665-11, 1st Edition, Measurement of radioactivity in the environment - Air: radon-222 - Part 11: Test method for soil gas with sampling at depth


For more standards like these, please refer to our Document Center List of Standards on Radiation Measurements.

Tuesday, September 6, 2016

New Plastics Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Plastics In General are now available;


  • ASTM D648, 2016 Edition, Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
  • ASTM D696, 2016 Edition, Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
  • ASTM D1203, 2016 Edition, Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
  • ASTM D1823, 2016 Edition, Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
  • ASTM D1824, 2016 Edition, Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
  • ASTM D1929, 2016 Edition, Standard Test Method for Determining Ignition Temperature of Plastics
  • ASTM D2843, 2016 Edition, Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
  • ASTM D4000, 2016 Edition, Standard Classification System for Specifying Plastic Materials
  • ASTM D4508, Withdrawn Without Replacement, Standard Test Method for Chip Impact Strength of Plastics (Withdrawn 2016)
  • ASTM E2347, 2016 Edition, Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
  • ASTM E2479, 2016 Edition, Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves
  • BS EN ISO 1043-1, 2011 Edition with Amendment 1, Plastics. Symbols and abbreviated terms. Basic polymers and their special characteristics
  • BS EN ISO 4892-1, 2016 Edition, Plastics. Methods of exposure to laboratory light sources. General guidance
  • DIN EN ISO 20200, 2016 Edition, Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
  • ISO 1043-1-AM1, Amendment 1 for the 4th Edition, Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
  • ISO 1043-4-AM1, Amendment 1 for the 1st Edition, Plastics - Symbols and abbreviated terms - Part 4: Flame retardants
  • ISO 4892-1, 3rd Edition, Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance


For more standards like these, please refer to our Document Center List of Standards on Plastics In General.

Friday, September 2, 2016

New Advanced Ceramics Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Advanced Ceramics are now available;


  • BS EN 1071-1, Withdrawn and Replaced by BS EN ISO 18452, Advanced technical ceramics. Methods of test for ceramic coatings. Determination of coating thickness by contact probe filometer
  • BS EN 1071-3, Withdrawn and Replaced by BS EN ISO 20502, Advanced technical ceramics. Methods of test for ceramic coatings. Determination of adhesion and other mechanical failure modes by a scratch test
  • BS EN ISO 13383-1, Corrigendum 1 for the 2012 Edition, Fine ceramics (advanced ceramics, advanced technical ceramics). Microstructural characterization. Determination of grain size and size distribution
  • BS EN ISO 13383-2, Corrigendum 1 for the 2012 Edition, Fine ceramics (advanced ceramics, advanced technical ceramics). Microstructural characterization. Determination of phase volume fraction by evaluation of micrographs
  • BS EN ISO 14544, Corrigendum 1 for the 2013 Edition, Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature. Determination of compression properties
  • BS EN ISO 14574, Corrigendum 1 for the 2013 Edition, Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature. Determination of tensile properties
  • BS EN ISO 14629, Corrigendum 1 for the 2012 Edition, Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of flowability of ceramic powders
  • BS EN ISO 17142, Corrigendum 1 for the 2014 Edition, Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of fatigue properties at constant amplitude
  • BS EN ISO 18452, 2016 Edition, Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of thickness of ceramic films by contact-probe profilometer
  • BS EN ISO 20502, 2016 Edition, Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of adhesion of ceramic coatings by scratch testing
  • BS EN ISO 23145-1, Corrigendum 1 for the 2008 Edition, Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powders. Tap density
  • BS EN ISO 23146, 2016 Edition, Fine ceramics (advanced ceramics, advanced technical ceramics). Test methods for fracture toughness of monolithic ceramics. Single-edge V-notch beam (SEVNB) method
  • BS ISO 17561, 2016 Edition, Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
  • BS ISO 19635, 2016 Edition, Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antialgal activity of semiconducting photocatalytic materials
  • ISO 14704, 3rd Edition, Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature
  • ISO 17561, 2nd Edition, Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
  • ISO 17562, 2nd Edition, Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for linear thermal expansion of monolithic ceramics by push-rod technique


For more standards like these, please refer to our Document Center List of Standards on Advanced Ceramics.

Thursday, September 1, 2016

New Printed Circuits and Boards Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Printed Circuits and Boards are now available;


  • ASTM F1896, 2016 Edition, Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
  • BS EN 61189-3-719, 2016 Edition, Test methods for electrical materials, printed boards and other interconnection structures and assemblies. Test methods for interconnection structures (printed boards). Monitoring of single plated-through hole (PTH) resistance change during temperature cycling
  • BS EN 62326-20, 2016 Edition, Printed boards. Printed circuit boards for high-brightness LEDs
  • IEC-61249-2-43, Edition 1.0, Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
  • IEC-61249-2-44, Edition 1.0, Materials for printed boards and other interconnecting structures - Part 2-44: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly


For more standards like these, please refer to our Document Center List of Standards on Printed Circuits and Boards.