- ASTM D2036, 2009 Edition Reapproved in 2015, Standard Test Methods for Cyanides in Water
- ASTM D4282, 2015 Edition, Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
- ASTM D5543, 2015 Edition, Standard Test Method for Low-Level Dissolved Oxygen in Water
- ASTM D5997, 2015 Edition, Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
- ASTM D6317, 2015 Edition,Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
- ASTM D7126, 2015 Edition, Standard Test Method for On-Line Colorimetric Measurement of Silica
- ASTM D7236, 2015a Edition, Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
- ASTM D7365, 2009a Edition Reapproved in 2015, Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide
- BS 6920-4, Withdrawn and replaced by BS EN 15768, Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Method for the GCMS identification of water leachable organic substances
- BS EN 15768, 2015 Edition, Influence of materials on water intended for human consumption. GC-MS identification of water leachable organic substances
- BS EN 16691, 2015 Edition, Water quality. Determination of selected polycyclic aromatic hydrocarbons (PAH) in whole water samples. Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
- BS EN 16693, 2015 Edition, Water quality. Determination of organochlorine pesticides (OCP) in whole water samples. Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
- BS EN 16694, 2015 Edition, Water quality. Determination of selected polybrominated diphenly ether (PBDE) in whole water samples. Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography-mass spectrometry (GC-MS)
- ISO 16780, 1st Edition, Water quality - Determination of polychlorinated naphthalenes (PCN) - Method using gas chromatography (GC) and mass spectrometry (MS)
- ISO 18191, 1st Edition, Water quality - Determination of pHt in sea water - Method using the indicator dye m-cresol purple
For more standards like these, please see our Document Center List of Standards on the Examination of Water for Chemical Substances.
