New Fire Protection Standards for the 2nd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Fire Protection are now available:

• ASTM E2307, 2015a Edition, Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
• BS 7273-4, 2015 Edition, Code of practice for the operation of fire protection measures. Actuation of release mechanisms for doors
• BS EN 54-12, 2015 Edition, Fire detection and fire alarm systems. Smoke detectors. Line detectors using an optical beam
• BS EN 54-22, 2015 Edition, Fire detection and fire alarm systems. Resettable line-type heat detectors
• BS EN 54-26, 2015 Edition, Fire detection and fire alarm systems. Carbon monoxide detectors. Point detectors
• BS EN 54-27, 2015 Edition, Fire detection and fire alarms systems. Duct smoke detectors
• BS EN 54-29, 2015 Edition, Fire detection and fire alarm systems. Multi-sensor fire detectors. Point detectors using a combination of smoke and heat sensors
• BS EN 54-30, 2015 Edition, Fire detection and fire alarm systems. Multi-sensor fire detectors. Point detectors using a combination of carbon monoxide and heat sensors

For more standards like these, please see our Document Center List of Standards on Fire Protection.

New Transfusion, Infusion And Injection Medical Equipment for the 2nd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Transfusion, Infusion And Injection Equipment are now available:

• BS EN 60601-2-24, 2015 Edition, Medical electrical equipment. Particular requirements for the basic safety and essential performance of infusion pumps and controllers
• BS EN ISO 8536-8, 2015 Edition, Infusion equipment for medical use. Infusion sets for single use with pressure infusion apparatus
• BS EN ISO 8536-9, 2015 Edition, Infusion equipment for medical use. Fluid lines for single use with pressure infusion equipment
• BS EN ISO 8536-10, 2015 Edition, Infusion equipment for medical use. Accessories for fluid lines for single use with pressure infusion equipment
• BS EN ISO 8536-11, 2015 Edition, Infusion equipment for medical use. Infusion filters for single use with pressure infusion equipment
• ISO 8536-8, 2nd Edition, Infusion equipment for medical use - Part 8: Infusion sets for single use with pressure infusion apparatus
• ISO 8536-9, 2nd Edition, Infusion equipment for medical use - Part 9: Fluid lines for single use with pressure infusion equipment
• ISO 8536-10, 2nd Edition, Infusion equipment for medical use - Part 10: Accessories for fluid lines for single use with pressure infusion equipment
• ISO 8536-11, 2nd Edition, Infusion equipment for medical use - Part 11: Infusion filters for single use with pressure infusion equipment

For more standards like these, please see our Document Center List of Standards on Transfusion, Infusion And Injection Equipment.

New Quality Standards for the 2nd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Quality are now available:

• ASTM C1093, 2015 Edition, Standard Practice for Accreditation of Testing Agencies for Masonry
• ASTM D6300, 2015 Edition, Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
• ASTM E1323, 2015 Edition, Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
• ASTM E2587, 2015 Edition, Standard Practice for Use of Control Charts in Statistical Process Control
• ASTM E2659, 2015 Edition, Standard Practice for Certificate Programs
• ASTM E2709, 2014 Edition with Editorial Correction, Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
• ASTM E2819, 2011 Edition Reapproved in 2015, Standard Practice for Single- and Multi-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL
• BS 5760-18, Withdrawn and replaced by BS EN 62741, Reliability of systems, equipment and components. Guide to the demonstration of dependability requirements. The dependability case
• BS 8543, 2015 Edition, Complaint handling in organizations. Specification
• BS EN 62740, 2015 Edition, Root cause analysis (RCA)
• BS EN 62741, 2015 Edition, Demonstration of dependability requirements. The dependability case
• ISO/IEC 17021, Withdrawn and replaced by ISO/IEC 17021-1, Conformity assessment -- Requirements for bodies providing audit and certification of management systems
• ISO/IEC 17021-1, 1st Edition, Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 1: Requirements
• PAS 277, 2015 Edition, Health and wellness apps. Quality criteria across the life cycle. Code of practice

For more standards like these, please see our Document Center List of Standards on Quality.

You may also want to review my previous post:

New Quality Standards for the 4th Quarter 2014

New Surface Active Agents Standards for the 2nd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards for Surface Active Agents are now available:

• ASTM D6361, 1998 Edition Reapproved in 2015, Standard Guide for Selecting Cleaning Agents and Processes
• BS ISO 16560, 2015 Edition, Surface active agents. Determination of polyethylene glycol content in nonionic ethoxylated surfactants. HPLC method
• BS ISO 17280, 2015 Edition, Surface active agents. Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography
• ISO 16560, 1st Edition, Surface active agents - Determination of polyethylene glycol content in nonionic ethoxylated surfactants - HPLC method
• ISO 17280, 1st Edition, Surface active agents - Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography

For more standards like these, please see our Document Center List of Standards for Surface Active Agents.

New Electrical And Magnetic Measurement Standards for the 2nd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Electrical And Magnetic Measurements are now available:

• ASTM A698, 2015 Edition, Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
• BS EN 60404-5, 2015 Edition, Magnetic materials. Permanent magnet (magnetically hard) materials. Methods of measurement of magnetic properties
• BS EN 60404-8-1, 2015 Edition, Magnetic materials. Specifications for individual materials. Magnetically hard materials
• BS EN 61000-4-30, 2015 Edition, Electromagnetic compatibility (EMC). Testing and measurement techniques. Power quality measurement methods
• BS EN 62056-1-0, 2015 Edition, Electricity metering data exchange. The DLMS/COSEM suite. Smart metering standardization framework
• IEC 60404-5, Edition 3.0, Magnetic materials - Part 5: Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties
• IEC 60404-8-1, Edition 3.0, Magnetic materials - Part 8-1: Specifications for individual materials - Magnetically hard materials
• IEC 60455-2, Edition 3.0, Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
• IEC 60865-2, Edition 2.0, Short-circuit currents - Calculation of effects - Part 2: Examples of calculation
• IEC 61340-4-1 Amendment 1, Amendment 1 for Edition 2.0 or Consolidated Edition 2.1,  Amendment 1: Electrostatics - Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors
• IEC 61340-4-6, Edition 2.0, Electrostatics - Part 4-6: Standard test methods for specific applications - Wrist straps
• IEC 62749, Edition 1.0, Assessment of power quality - Characteristics of electricity supplied by public networks
• PD 6575-2, Withdrawn and replaced by PD IEC 60865-2, Short-circuit currents. Calculation of effects. Examples of calculation
• PD IEC 60865-2, 2015 Edition, Short-circuit currents. Calculation of effects. Examples of calculation

For more standards like these, please see our Document Center List of Standards on Electrical And Magnetic Measurements.

You may also want to review my previous post:

New Electrical And Magnetic Measurement Standards for the 1st Quarter 2015

New Dentistry Standards for the 2nd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Dentistry are now available:

• BS EN ISO 6872, 2015 Edition, Dentistry. Ceramic materials
• BS EN ISO 7494-2, 2015 Edition, Dentistry. Dental units. Air, water, suction and wastewater systems
• BS EN ISO 11144, Withdrawn and replaced by BS EN ISO 7494-2, Dental equipment. Connections for supply and waste lines
• BS EN ISO 24234, 2015 Edition, Dentistry. Dental amalgam
• ISO 6872, 4th Edition, Dentistry - Ceramic materials
• ISO 7494-2, 2nd Edition, Dentistry - Dental units - Part 2: Air, water, suction and wastewater systems
• ISO 10637, Partially replaced by ISO 7494-2, Dental equipment - High- and medium-volume suction systems
• ISO 11144, Replaced by ISO 7494-2, Dental equipment - Connections for supply and waste lines
• ISO 16954, 1st Edition, Dentistry - Test methods for dental unit waterline biofilm treatment
• ISO 24234, 2nd Edition, Dentistry - Dental amalgam

To find more standards like these, please see our Document Center List of Standards on Dentistry.

You may also review my previous post:

New Dentistry Standards for the 1st Quarter 2015

New Protective Equipment Standards for the 2nd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Protective Equipment are now available:

• ASTM E2484, 2008 Edition Reapproved in 2015, Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices
• ASTM F1045, 2015 Edition, Standard Performance Specification for Ice Hockey Helmets
• ASTM F1952, 2015 Edition, Standard Specification for Helmets Used for Downhill Mountain Bicycle Racing
• ASTM F2032, 2015 Edition, Standard Specification for Helmets Used for BMX Cycling
• BS EN ISO 12312-2, 2015 Edition, Eye and face protection. Sunglasses and related eyewear. Filters for direct observation of the sun
• DIN EN 1263-1, 2015 Edition, Temporary works equipment - Safety nets - Part 1: Safety requirements, test methods
• DIN EN 1263-2, 2015 Edition, Temporary works equipment - Safety nets - Part 2: Safety requirements for the positioning limits
• ISO 11999-1, 1st Edition, PPE for firefighters - Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures - Part 1: General
• ISO 11999-2, 1st Edition, PPE for firefighters - Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures - Part 2: Compatibility
• ISO 11999-3, 1st Edition, PPE for firefighters - Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures - Part 3: Clothing
• ISO 11999-4, 1st Edition, PPE for firefighters - Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures - Part 4: Gloves
• ISO 12312-2, 1st Edition, Eye and face protection - Sunglasses and related eyewear - Part 2: Filters for direct observation of the sun
• ISO 16900-8, 1st Edition, Respiratory protective devices - Methods of test and test equipment - Part 8: Measurement of RPD air flow rates of assisted filtering RPD
• ISO 16976-2, 2nd Edition, Respiratory protective devices - Human factors - Part 2: Anthropometrics

For more standards like these, please see our Document Center List of Standards on Protective Equipment.

You can also take a look at this previous post:

New Protective Equipment Standards for the 1st Quarter 2015

New Paint and Varnish Standards for the 2nd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Paints and Varnishes are now available:

• ASTM D711, 2010 Edition Reapproved in 2015, Standard Test Method for No-Pick-Up Time of Traffic Paint
• ASTM D868, 2010 Edition Reapproved in 2015, Standard Practice for Determination of Degree of Bleeding of Traffic Paint
• ASTM D869, 1985 Edition Reapproved in 2015, Standard Test Method for Evaluating Degree of Settling of Paint
• ASTM D1309, 1993 Edition Reapproved in 2015, Standard Test Method for Settling Properties of Traffic Paints During Storage
• ASTM D2972, 1969 Edition Reapproved in 2015, Standard Test Method for Solvent and Fuel Resistance of Traffic Paint
• ASTM D3450, 2015 Edition, Standard Test Method for Washability Properties of Interior Architectural Coatings
• ASTM D3618, 2005 Edition Reapproved in 2015, Standard Test Method for Detection of Lead in Paint and Dried Paint Films
• ASTM D3624, 1985A Edition Reapproved in 2015, Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
• ASTM D3717, 1985A Edition Reapproved in 2015, Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
• ASTM D3718, 1985A Edition Reapproved in 2015, Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
• ASTM D3792, 2005 Edition Reapproved in 2015, Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
• ASTM D3925, 2002 Edition Reapproved in 2015, Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
• ASTM D4017, 2002 Edition Reapproved in 2015, Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
• ASTM D4214, 2007 Edition Reapproved in 2015, Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
• ASTM D4449, 2015 Edition, Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance
• ASTM D6900, 2010 Edition Reapproved in 2015, Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate
• ASTM D7187, 2015 Edition, Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
• ASTM D7190, 2010 Edition Reapproved in 2015, Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films
• ASTM D7539, 2010 Edition Reapproved in 2015, Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints
• BS EN ISO 3233-3, 2015 Edition, Paints and varnishes. Determination of the percentage volume of non-volatile matter. Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material
• BS EN ISO 3679, 2015 Edition, Determination of flash no-flash and flash point. Rapid equilibrium closed cup method
• BS EN ISO 3680, Withdrawn and replaced by BS EN ISO 3679, Methods of test for petroleum and its products. BS 2000-524. Determination of flash/no flash. Rapid equilibrium closed cup method
• BS EN ISO 23811, Withdrawn and replaced by BS EN ISO 3233-3, Paints and varnishes. Determination of percentage volume of non-volatile matter by measuring the nonvolatile matter content and the density of the coating material, and calculation of the theoretical spreading rate
• ISO 3233-3, 1st Edition, Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material

For more standards like these, please see our Document Center List of Standards on Paints and Varnishes.

You can also take a look at my previous posts:

New Paint and Varnish Standards for the 4th Quarter 2014

New Paint and Varnish Standards for the 1st Quarter 2014

New Toy and other Entertainment Equipment Standards for the 2nd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Toys and other Entertainment Equipment are now available:

• ASTM F770, 2015 Edition, Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices
• ASTM F1898, 2015 Edition, Standard Specification for Helmets for Non-Motorized Wheeled Vehicle Used by Infants and Toddlers
• ISO 8124-5, 1st Edition, Safety of toys - Part 5: Determination of total concentration of certain elements in toys
• ISO 17842-1, 1st Edition, Safety of amusement rides and amusement devices - Part 1: Design and manufacture
• ISO 17842-2, 1st Edition, Safety of amusement rides and amusement devices - Part 2: Operation and use
• ISO 17842-3, 1st Edition, Safety of amusement rides and amusement devices - Part 3: Requirements for inspection during design, manufacture, operation and use

For more standards like these, please see our Document Center List of Standards on Toys and other Entertainment Equipment.

You may also want to take a look at my previous posts:

New Toy and other Entertainment Equipment Standards for the 1st Quarter 2015

New Toy and other Entertainment Equipment Standards for the 3rd Quarter 2014

New Toy and other Entertainment Equipment Standards for the 2nd Quarter 2014

New Valve Standards for the 2nd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Valves are now available:

• BS EN 12117, Withdrawn and replaced by BS EN ISO 17778, Plastics piping systems. Fittings, valves and ancillaries. Determination of gaseous flow rate/pressure drop relationships
• BS EN 13611, 2015 Edition, Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
• BS EN 14071, 2015 Edition, LPG equipment and accessories. Pressure relief valves for LPG pressure vessels. Ancillary equipment
• BS EN 16631, 2015 Edition, LPG equipment and accessories. Pressure relief valves for LPG pressure vessels. Reconditioning requirements
• BS EN 60534-2-1, Corrigendum 1 for 2011 Edition, Industrial-process control valves. Flow capacity. Sizing equations for fluid flow under installed conditions
• BS EN ISO 2503, 2009 Edition with Amendment A1, Gas welding equipment. Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
• BS EN ISO 13341, 2010 Edition with Amendment A1, Gas cylinders. Fitting of valves to gas cylinders
• BS EN ISO 15848-1, 2015 Edition, Industrial valves. Measurement, test and qualification procedures for fugitive emissions. Classification system and qualification procedures for type testing of valves
• BS EN ISO 15848-2, 2015 Edition, Industrial valves. Measurement, test and qualification procedures for fugitive emissions. Production acceptance test of valves
• DIN EN 13953, 2015 Edition, LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) (English Language)
• DIN EN 14912, 2015 Edition, LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders (English Language)
• IEC 60534-2-1, Corrigendum 1 for Edition 2.0, Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions
• ISO 5208, 4th Edition, Industrial valves - Pressure testing of metallic valves
• ISO 15848-1, 2nd Edition, Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves
• ISO 15848-2, 2nd Edition, Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves

For more standards like these, please see our Document Center List of Standards on Valves.

New Acoustic and Acoustic Measurement Standards for the 2nd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Acoustics and Acoustic Measurements are now available:

• ASTM D7145, 2005 Edition Reapproved in 2015, Standard Guide for Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means
• ASTM E664, 2015 Edition, Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method
• ASTM F914, 2015 Edition, Standard Test Method for Acoustic Emission for Aerial Personnel Devices Without Supplemental Load Handling Attachments
• ASTM F1430, 2015 Edition, Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments
• ASTM F1797, 2015 Edition, Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks
• ASTM F2174, 2002 Edition Reapproved in 2015, Standard Practice for Verifying Acoustic Emission Sensor Response
• BS 7135-2, Withdrawn, Replaced by BS EN ISO 9295, Noise emitted by computer and business equipment. Method of measurement of high-frequency noise
• BS EN 14389-2, 2015 Edition, Road traffic noise reducing devices. Procedures for assessing long term performance. Non-acoustical characteristics
• BS EN 60601-2-62, 2015 Edition, Medical electrical equipment. Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment
• BS EN 60704-2-5, 2005 Edition with Amendment A1, Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for electric thermal storage room heaters
• BS EN ISO 1683, 2015 Edition, Acoustics. Preferred reference values for acoustical and vibratory levels
• BS EN ISO 9295, 2015 Edition, Acoustics. Determination of high-frequency sound power levels emitted by machinery and equipment
• BS EN ISO 20361, 2015 Edition, Liquid pumps and pump units. Noise test code. Grades 2 and 3 of accuracy
• IEC 60601-2-37 Amendment 1, Amendment 1 for Edition 2.0, Amendment 1 - Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
• IEC 60601-2-66, Edition 2.0, Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
• ISO 1683, 3rd Edition, Acoustics - Preferred reference values for acoustical and vibratory levels
• ISO 9295, 2nd Edition, Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment
• ISO 17534-1, 1st Edition, Acoustics - Software for the calculation of sound outdoors - Part 1: Quality requirements and quality assurance
• ISO 20361, 2nd Edition, Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy

For more standards like these please see our Document Center List of Standards on Acoustics and Acoustic Measurements.

You may also want to review our previous post:

New Acoustic and Acoustic Measurement Standards for the 3rd Quarter 2014

New Water Quality Standards for the 2nd Quarter 2015 - Part 2

Document Center Inc. is pleased to announce that the following New Standards on Water Quality are now available (a continuation of Monday's post):

• BS EN 1018, 2013 Edition with Amendment A1, Chemicals used for treatment of water intended for human consumption. Calcium carbonate
• BS EN 12931, 2015 Edition, Chemicals used for treatment of water intended for human consumption. Chemicals for emergency use. Sodium dichloroisocyanurate, anhydrous
• BS EN 14368, 2015 Edition, Products used for treatment of water intended for human consumption. Manganese dioxide coated limestone
• BS EN 14369, 2015 Edition, Products used for treatment of water intended for human consumption. Iron-coated granular activated alumina
• BS EN 14757, 2015 Edition, Water quality. Sampling of fish with multi-mesh gillnets
• BS EN 15030, 2012 Edition with Amendment A1, Chemicals used for treatment of water intended for human consumption. Silver salts for intermittent use
• DIN EN 14718, 2015 Edition, Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method (English Language)
• ISO 9697, 3rd Edition, Water quality - Gross beta activity in non-saline water - Test method using thick source
• ISO 13164-4, 1st Edition, Water quality - Radon-222 - Part 4: Test method using two-phase liquid scintillation counting
• ISO 16778, 1st Edition, Water quality - Calanoid copepod early-life stage test with Acartia tonsa
• PD CEN 16692, 2015 Edition, Water quality. Determination of tributyltin (TBT) in whole water samples. Method using solid phase extraction (SPE) with SPE disks and gas chromatography with triple quadrupole mass spectrometry

For more standards like these, please see our Document Center List of Standards on Water Quality.  The links will direct you to the various sub-topics.

New Water Quality Standards for the 2nd Quarter 2015 - Part 1

Document Center Inc. is pleased to announce that the following New Standards on Water Quality are now available:

• ASTM D932, 2015 Ediiton, Standard Practice for Filamentous Iron Bacteria in Water and Water-Formed Deposits
• ASTM D1426, 2015 Edition, Standard Test Methods for Ammonia Nitrogen In Water
• ASTM D2688, 2015 Edition, Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)
• ASTM D2972, 2015 Edition, Standard Test Methods for Arsenic in Water
• ASTM D4130, 2015 Edition, Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines
• ASTM D4191, 2015 Edition, Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry
• ASTM D4192, 2015 Edition, Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry
• ASTM D4282, 2002 Edition Reapproved in 2015, Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
• ASTM D4458, 2015 Edition, Standard Test Method for Chloride Ions in Brackish Water, Seawater, and Brines
• ASTM D5173, 2015 Edition, Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide
• ASTM D6000, 2015 Edition, Standard Guide for Presentation of Water-Level Information from Groundwater Sites
• ASTM D6502, 2010 Edition Reapproved in 2015, Standard Test Method for Measurement of On-line Integrated Samples of Low Level Suspended Solids and Ionic Solids in Process Water by X-Ray Fluorescence (XRF)
• ASTM D7237, 2015 Edition, Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
• ASTM F1738, 2015 Edition, Standard Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants

For more standards like these, please see our Document Center List of Standards on Water Quality.  The links will lead you to the appropriate sub-topics.

New Nanotechnology Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Nanotechnology are now available:

• BS IEC 62860, 2013 Edition, Test methods for the characterization of organic transistors and materials
• BS IEC 62860-1, 2013 Edition, Test methods for the characterization of organic transistor-based ring oscillators
• IEC 62607-5-1, Edition 1.0, Nanomanufacturing - Key control characteristics - Part 5-1: Thin-film organic/nano electronic devices - Carrier transport measurements
• ISO/DIS-14644-12, 1st Edition Draft (for Public Review), Cleanrooms and associated controlled environments - Part 12: Classification of air cleanliness by nanoscale particle concentration

For more standards like this, please see our Document Center List of Standards on Physics, Chemistry.   

You can also review my previous blogs:

New Nanotechnology Standards for the 2nd Quarter 2014

New Nanotechnology Standards for the 1st Quarter 2014

New Nanotechnology Standards for the 4th Quarter 2013

And take a look at this new post!

New Nanotechnology Standards for the 2nd Quarter 2015

New Nanotechnology Standards for the 2nd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Nanotechnology are now available:

• BS EN 62607-3-1, 2014 Edition with Corrigendum 1, Nanomanufacturing. Key control characteristics. Luminescent nanomaterials. Quantum efficiency
• ISO 27687, Withdrawn and replaced by ISO-80004-2, Nanotechnologies -- Terminology and definitions for nano-objects -- Nanoparticle, nanofibre and nanoplate
• ISO 80004-2, 1st Edition, Nanotechnologies - Vocabulary - Part 2: Nano-objects
• PD CEN ISO 17200, 2015 Edition, Nanotechnology. Nanoparticles in powder form. Characteristics and measurements
• PD CEN ISO 80004-6, Corrigendum 1 for 2013 Edition, Nanotechnologies. Vocabulary. Nano-object characterization
• PD CEN ISO 80004-8, 2015 Edition, Nanotechnologies. Vocabulary. Nanomanufacturing processes

For more standards like these, please see our Document Center List of Standards on Physics, Chemistry.

You may also like to review these previous posts:

New Nanotechnology Standards for the 3rd Quarter 2014

New Nanotechnology Standards for the 2nd Quarter 2014

New Nanotechnology Standards for the 1st Quarter 2014