Document Center, Inc. is pleased to announce that the following Standards on Advanced Ceramics are now available;
- ASTM C1360, 2017 Edition, Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
- ASTM C1368, Reapproved in 2017, Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Strength Testing at Ambient Temperature
- ASTM C1576, Reapproved in 2017, Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
- ASTM C1674, 2016 Edition, Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
- ASTM C1773, 2017 Edition, Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
- BS ISO 18608, 2017 Edition, Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure. Determination of the resistance to crack propagation by notch sensitivity testing
- BS ISO 19606, 2017 Edition, Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for surface roughness of fine ceramic films by atomic force microscopy
- BS ISO 19722, 2017 Edition, Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determination of photocatalytic activity on semiconducting photocatalytic materials by dissolved oxygen consumption
- BS ISO 20343, 2017 Edition, Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus of thick ceramic coatings at elevated temperature
- DIN EN 1071-2, Withdrawn and Replaced by DIN EN ISO 26423, Advanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the crater grinding method
- DIN EN 1071-3, Withdrawn and Replaced by DIN EN ISO 20502, Advanced technical ceramics - Methods of test for ceramic coatings - Part 3: Determination of adhesion and other mechanical failure modes by a scratch test
- DIN EN 15157, Withdrawn and Replaced by DIN EN ISO 17142, Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude
- DIN EN 1892, Withdrawn and Replaced by DIN EN ISO 14574, Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties
- DIN EN 1893, Withdrawn and Replaced by DIN EN ISO 14574, Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties
- DIN EN 623-3, Withdrawn and Replaced by DIN EN ISO 13383-1, Advanced technical ceramics - Monolithic ceramics; General and textural properties - Part 3: Determination of grain size and size distribution (characterized by the linear intercept method)
- DIN EN 725-8, Withdrawn and Replaced by DIN EN ISO 23145-1, Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density
- DIN EN 725-9, Withdrawn and Replaced by DIN EN ISO 23145-2, Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of untapped bulk density
- ISO 18608, 1st Edition, Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of the resistance to crack propagation by notch sensitivity testing
- ISO 19606, 1st Edition, Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for surface roughness of fine ceramic films by atomic force microscopy
- ISO 19618, 1st Edition, Fine ceramics (advanced ceramics, advanced technical ceramics) - Measurement method for normal spectral emissivity using blackbody reference with an FTIR spectrometer
- ISO 19722, 1st Edition, Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determination of photocatalytic activity on semiconducting photocatalytic materials by dissolved oxygen consumption
- ISO 20343, 1st Edition, Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus of thick ceramic coatings at elevated temperature
- ASTM C1275, 2016 Edition, Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
- ASTM C1337, 2017 Edition, Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
Document Center Inc. is pleased to announce that the following New Standards on Raw Materials for Rubber and Plastics are now available:
- ASTM D2990, 2017 Edition, Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
- BS EN ISO 177, 2017 Edition, Plastics. Determination of migration of plasticizers
- BS EN ISO 29664, Corrigendum 1 with 2017 Edition, Plastics. Artificial weathering including acidic deposition
- BS EN ISO 16620-5, 2017 Edition, Plastics. Biobased content. Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
- ISO 12992, 2nd Edition, Plastics - Vertical flame spread determination for film and sheet
- ISO 16620-5, 1st Edition, Plastics - Biobased content - Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
- PD CEN ISO 17801, Corrigendum 1 for 2014 Edition, Plastics. Standard table for reference global solar spectral irradiance at sea level. Horizontal, relative air mass
- PD CEN ISO 18486, Corrigendum 1 for 2016 Edition, Plastics. Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
- UNE EN ISO 11357-1, 2017 Edition, Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
- ASTM D6272, 2017 Edition, Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- BS ISO 12992, 2017 Edition, Plastics. Vertical flame spread determination for film and sheet
Document Center, Inc. is pleased to announce that the following Standards on Cement, Gypsum, Lime, and Mortar are now available;
- ASTM C1040, 2016A Edition, Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods
- ASTM C125,2016 Edition, Standard Terminology Relating to Concrete and Concrete Aggregates
- ASTM C1319, 2016 Edition, Standard Specification for Concrete Grid Paving Units
- ASTM C138, 2017 Edition, Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
- ASTM C1577, 2017 Edition, Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
- ASTM C1623, 2017 Edition, Standard Specification for Manufactured Concrete Masonry Lintels
- ASTM C1634, 2016 Edition, Standard Specification for Concrete Facing Brick
- ASTM C1701, 2017A Edition, Standard Test Method for Infiltration Rate of In Place Pervious Concrete
- ASTM C1740, 2016 Edition, Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method
- ASTM C311, 2016 Edition, Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
- ASTM C39, 2017A Edition, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C40, 2016 Edition, Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
- ASTM C403, 2016 Edition, Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
- ASTM C55, 2016 Edition, Standard Specification for Concrete Building Brick
- ASTM C803, 2017 Edition, Standard Test Method for Penetration Resistance of Hardened Concrete
- ASTM C856, 2017 Edition, Standard Practice for Petrographic Examination of Hardened Concrete
- ASTM C90, 2016A Edition, Standard Specification for Loadbearing Concrete Masonry Units
- ASTM C94, 2017 Edition, Standard Specification for Ready-Mixed Concrete
- ASTM C989, 2016(E1) Edition, Standard Specification for Slag Cement for Use in Concrete and Mortars
- ASTM E2634, 2017 Edition, Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems
- ASTM F1896, 2016A Edition, Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
- BS EN 490, 2017 Edition, Concrete roofing tiles and fittings for roof covering and wall cladding. Product specifications
- JIS A 6202, 2017 Edition, Expansive additive for concrete
- ASTM C490, 2017 Edition, Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
- BS EN 1766, 2017 Edition, Products and systems for the protection and repair of concrete structures. Test methods. Reference concretes for testing
- BS EN 12004-2, 2017 Edition, Adhesives for ceramic tiles. Test methods
- BS EN 1323, Withdrawn and Replaced by BS EN 12004-2, Adhesives for tiles. Concrete slabs for tests
- ISO 13315-4, 1st Edition, Environmental management for concrete and concrete structures - Part 4: Environmental design of concrete structures
Document Center Inc. is pleased to announce that the following New Standards on Dishwashers are available now:
- ASTM F1114, 2016 Edition, Standard Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Stationary Rack Type Water-Driven Rotary Spray
- ASTM F1202, 2016 Edition, Standard Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type
- ASTM F1203, 6 Edition, Standard Specification for Washing Machines - Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
- BS EN 50242, 2016 Edition, Electric dishwashers for household use. Methods for measuring the performance
- BS EN 50593, 2017 Edition, Electric dishwashers for commercial use. Test methods for measuring the performance
- BS EN 60436, Withdrawn and replaced by 2008 Edition with Amendment 11, Electric dishwashers for household use. Methods for measuring the performance
For more standards like these, please refer to our Document Center List of Standards on Dishwashers.
Document Center, Inc. is pleased to announce that the following Standards on Tractive Stock are now available;
- BS EN 15551, 2017 Edition, Railway applications. Railway rolling stock. Buffers
- BS EN 62621, 2016 Edition with Amendment 1 interfiled, Railway applications. Fixed installations. Electric traction. Specific requirements for composite insulators used for overhead contact line systems
- IEC 61375-2-4, Edition 1.0, Electronic railway equipment - Train communication network (TCN) - Part 2-4: TCN application profile
- IEC 62924, Edition 1.0, Railway applications - Fixed installations - Stationary energy storage system for DC traction systems
- BS EN 15273-2, 2013 Edition with Amendment 1, Railway applications. Gauges. Rolling stock gauge
- BS EN 15273-3, 2013 Edition with Amendment 1, Railway applications. Gauges. Structure gauges
- BS EN 50121-3-1, 2017 Edition, Railway applications. Electromagnetic compatibility. Rolling stock. Train and complete vehicle
- BS EN 50121-3-2 Edition, Railway applications. Electromagnetic compatibility. Rolling stock. Apparatus
For more standards like these, please refer to our Document Center List of Standards on Tractive Stock.
Document Center, Inc. is pleased to announce that the following Standards on Geotextiles are now available;
- ASTM D4491, 2017 Edition, Standard Test Methods for Water Permeability of Geotextiles by Permittivity
- ASTM D5101, 2012 Edition Reapproved in 2017, Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems
- ASTM D6461, 2016 Edition, Standard Specification for Silt Fence Materials
- ASTM D6462, Withdrawn Without Replacement, Standard Practice for Silt Fence Installation (Withdrawn 2017)
- DIN EN 13249, 2016 Edition, Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
- DIN EN 13250, 2016 Edition, Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways
- DIN EN 13251, 2016 Edition, Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
- DIN EN 13252, 2016 Edition, Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
- DIN EN 13253, 2016 Edition, Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
- DIN EN 13254, 2016 Edition, Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams
- DIN EN 13255, 2016 Edition, Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
- DIN EN 13256, 2016 Edition, Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
- DIN EN 13257, 2016 Edition, Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
- DIN EN 13265, 2016 Edition, Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
- DIN EN 13719, 2016 Edition, Geosynthetics - Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers
- DIN EN ISO 9863-1, 2016 Edition, Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers
For more standards like these, please refer to our Document Center List of Standards on Geotextiles.
Document Center, Inc. is pleased to announce that the following Standards on Fibres and Cables are now available;
- BS EN 60794-2-22, 2017 Edition, Optical fibre cables. Indoor cables. Detail specification for multi-simplex breakout optical cables to be terminated with connectors
- IEC 60793-1-1, Edition 4.0, Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance
- IEC 60793-1-60, Edition 1.0, Optical fibres - Part 1-60: Measurement methods and test procedures - Beat length
- IEC 60793-1-61, Edition 1.0, Optical fibres - Part 1-61: Measurement methods and test procedures - Polarization crosstalk
- IEC 60793-2-70, Edition 1.0, Optical fibres - Part 2-70: Product specifications - Sectional specification for polarization-maintaining fibres
- IEC 60794-1-2, Edition 4.0, Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General
For more standards like these, please refer to our Document Center List of Standards on Fibres and Cables.
Document Center, Inc. is pleased to announce that the following Standards on Electromagnetic Compatibility are now available;
- ASTM A1055, 2016 Edition, Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
- ASTM D968, 2016 Edition, Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
- ASTM D2197, 2016 Edition, Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
- ASTM D3003, 2016 Edition, Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
- ASTM D4828, 2016 Edition, Standard Test Methods for Practical Washability of Organic Coatings
- ASTM D5178, 2016 Edition, Standard Test Method for Mar Resistance of Organic Coatings
- BS 6496, Withdrawn and Replaced by BS EN 12206-1, Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with powder organic coatings
- BS EN 13523-1, 2017 Edition, Coil coated metals. Test methods. Film thickness
- BS EN 13523-10, 2017 Edition, Coil coated metals. Test methods. Resistance to fluorescent UV radiation and water condensation
- BS EN 13523-12, 2017 Edition, Coil coated metals. Test methods. Resistance to scratching
- BS EN 13525-22, 2017 Edition, Coil coated metals. Test methods. Colour difference. Visual comparison
- BS EN 13523-29, 2017 Edition, Coil coated metals. Test methods. Resistance to environmental soiling (Dirt pick-up and striping)
For more standards like these, please refer to our Document Center List of Standards on Organic Coatings.
Document Center, Inc. is pleased to announce that the following Standards on Electromagnetic Compatibility are now available;
- BS EN 50121-1, 2017 Edition, Railway applications. Electromagnetic compatibility. General
- BS EN 50121-2, 2017 Edition, Railway applications. Electromagnetic compatibility. Emission of the whole railway system to the outside world
- BS EN 50121-3-1, 2017 Edition, Railway applications. Electromagnetic compatibility. Rolling stock. Train and complete vehicle
- BS EN 50121-3-2, 2016 Edition, Railway applications. Electromagnetic compatibility. Rolling stock. Apparatus
- BS EN 50121-4, 2016 Edition, Railway applications. Electromagnetic compatibility. Emission and immunity of the signalling and telecommunications apparatus
- BS EN 50121-5, 2017 Edition, Railway applications. Electromagnetic compatibility. Emission and immunity of fixed power supply installations and apparatus
- IEC 61800-3, Edition 3.0, Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
For more standards like these, please refer to our Document Center List of Standards on Electromagnetic Compatibility.
Document Center, Inc. is pleased to announce that the following Standards on Rubber Compounding Ingredients are now available;
- ASTM D3313, Withdrawn and Replaced by ASTM D5230, Standard Test Method for Carbon Black-Individual Pellet Hardness
- ASTM D4122, 2017 Edition with Editorial Correction, Standard Practice for Carbon Black - Evaluation of an Industry Reference Black
- ASTM D4295, 1989 Edition Reapproved in 2017, Standard Classification for Rubber Compounding Materials - Zinc Oxide
- ASTM D4315, 1994 Edition Reapproved in 2017, Standard Test Methods for Rubber Compounding Material - Zinc Oxide
- ASTM D4528, 1988 Edition Reapproved in 2017, Standard Classification for Rubber Compounding Materials - Sulfur
- ASTM D4676, 1994 Edition Reapproved in 2017, Standard Classification for Rubber Compounding Materials - Antidegradants
- ASTM D4817, 1988 Edition Reapproved in 2017, Standard Classification for Rubber Compounding Materials - Stearic Acid
- ASTM D4818, 1989 Edition Reapproved in 2017, Standard Classification for Rubber Compounding Materials - Vulcanization Accelerators
- ASTM D5377, 1993 Edition Reapproved in 2017, Standard Classification for Rubber Compounding Materials - Ground Coal
- ASTM D7771, 2017 Edition, Standard Test Method for Determination of Benzo-a-Pyrene (BaP) Content in Carbon Black
- BS ISO 1437, 2017 Edition, Rubber compounding ingredients. Carbon black. Determination of sieve residue.
- BS ISO 9298, 2017 Edition, Rubber compounding ingredients. Zinc oxide. Test methods
- BS ISO 15825, 2017 Edition, Rubber compounding ingredients. Carbon black. Determination of aggregate size distribution by disc centrifuge photosedimentometry
- ISO 1437, 5th Edition, Rubber compounding ingredients - Carbon black - Determination of sieve residue
- ISO 9298, 2nd Edition, Rubber compounding ingredients - Zinc oxide - Test methods
- ISO 15825, 3rd Edition, Rubber compounding ingredients - Carbon black - Determination of aggregate size distribution by disc centrifuge photosedimentometry
For more standards like these, please refer to our Document Center List of Standards on Rubber Compounding Ingredients.
Document Center, Inc. is pleased to announce that the following Standards on Iron and Steel Pipes are now available;
- ASTM A209, 2003 Edition Reapproved in 2017, Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
- ASTM A213, 2017 Edition, Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
- ASTM A312, 2017 Edition, Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
- ASTM A796, 2017 Edition, Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
For more standards like these, please refer to our Document Center List of Standards on Iron and Steel Pipes.
Document Center, Inc. is pleased to announce that the following Standards on Plastics and Rubber Insulating Materials are now available;
- ASTM D2219, 2017 Edition, Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation
- ASTM D2220, 2017 Edition, Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation
- ASTM D2301, 2010 Edition Reapproved in 2017, Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
- ASTM D3005, 2017 Edition, Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
- ASTM D3006, 2010 Edition Reapproved in 2017, Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
- ASTM D6272, 2017 Edition, Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
For more standards like these, please refer to our Document Center List of Standards on Plastics and Rubber Insulating Materials.
Document Center, Inc. is pleased to announce that the following Standards on Physicochemical Methods of Analysis are now available;
- ASTM D4628, 2016 Edition, Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
- ASTM D6159, 2017 Edition, Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography
- ASTM E1644, 2017 Edition, Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
- ASTM E1754, 2017 Edition, Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
- ASTM E1786, 2017 Edition, Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
- ASTM E1979, 2017 Edition, Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
For more standards like these, please refer to our Document Center List of Standards on Physicochemical Methods of Analysis.
Document Center, Inc. is pleased to announce that the following Standards on Surface Preparation are now available;
- ASTM D7120, 2010 Edition Reapproved in 2017, Standard Guide for Evaluation and Preparation of Roof Membranes for Coating Application
- BS EN ISO 8502-2, 2017 Edition, Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Laboratory determination of chloride on cleaned surfaces
- BS EN ISO 8502-3, 2017 Edition, Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
- BS EN ISO 8502-4, 2017 Edition, Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Guidance on the estimation of the probability of condensation prior to paint application
- BS EN ISO 8503-5, 2017 Edition, Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Replica tape method for the determination of the surface profile
- ISO 8502-2, 3rd Edition, Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces
- ISO 8502-3, 2nd Edition, Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
- ISO 8502-4, 2nd Edition, Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application
- ISO 8503-5, 2nd Edition, Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile
For more standards like these, please refer to our Document Center List of Standards on Surface Preparation.
Document Center, Inc. is pleased to announce that the following Standards on Camping Equipment and Camp-Sites are now available;
- BS EN 581-3,
2017 Edition, Outdoor furniture. Seating and tables for camping,
domestic and contract use. Mechanical safety requirements for tables
- BS EN ISO 8936, 2017 Edition, Awnings for leisure accommodation vehicles. Requirements and test methods
- BS EN ISO 23537-1, 2016 Edition, Requirements for sleeping bags. Thermal and dimensional requirements
- BS EN ISO 23537-2, Corrigendum 1 for 2016 Edition, Requirements for sleeping bags. Fabric and material properties
- DIN EN 13537, Withdrawn and Replace by DIN EN ISO 23537-1 and DIN EN ISO 23537-2, Requirements for sleeping bags
- ISO 8936, 4th Edition, Awnings for leisure accommodation vehicles - Requirements and test methods
For more standards like these, please refer to our Document Center List of Standards on Camping Equipment and Camp-Sites.
Document Center, Inc. is pleased to announce that the following Standards on Cement, Gypsum, Lime, and Mortar are now available;
- ASTM C110, 2016 Edition with Editorial Correction, Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
- ASTM C265, Withdrawn Without Replacement, Standard Test Method for Water-Extractable Sulfate in Hydrated Hydraulic Cement Mortar
- ASTM C490, 2017 Edition, Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
- ASTM C563, 2017 Edition, Standard Guide for Approximation of Optimum SO3 in Hydraulic Cement
- ASTM C754, 2017 Edition, Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
- ASTM C780, 2016A Edition, Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
- ASTM C926, 2017 Edition, Standard Specification for Application of Portland Cement-Based Plaster
- ASTM C1708, 2016 Edition, Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements
- ASTM C1714, 2016 Edition, Standard Specification for Preblended Dry Mortar Mix for Unit Masonry
- ASTM C1749, 2017A Edition, Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
- ASTM D4832, 2016 Edition, Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
- ASTM D6023, 2016 Edition, Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)
- BS EN 1308, Withdrawn and Replaced by BS EN 12004-2, Adhesives for tiles. Determination of slip.
- BS EN 1323, Withdrawn and Replaced by BS EN 12004-2, Adhesives for tiles. Concrete slabs for tests.
- BS EN 1324, Withdrawn and Replaced by BS EN 12004-2, Adhesives for tiles. Determination of shear adhesion strength of dispersion adhesives.
- BS EN 1346, Withdrawn and Replaced by BS EN 12004-2, Adhesives for tiles. Determination of open time.
- BS EN 1348, Withdrawn and Replaced by BS EN 12004-2, Adhesives for tiles. Determination of tensile adhesion strength for cementitious adhesives.
- BS EN 12002, Withdrawn and Replaced by BS EN 12004-2, Adhesives for tiles. Determination of transverse deformation for cementitious adhesives and grouts
- BS EN 12003, Withdrawn and Replaced by BS EN 12004-2, Adhesives for tiles. Determination of shear adhesion strength of reaction resin adhesives
- BS EN 12004, Withdrawn and Replaced by BS EN 12004-2, Adhesives for tiles. Requirements, evaluation of conformity, classification and designation
- BS EN 12004-2, 2017 Edition, Adhesives for ceramic tiles. Test methods
- BS EN 16908, 2017 Edition, Cement and building lime. Environmental product declarations. Product category rules complementary to EN 15804
- DIN EN 196-1, 2016 Edition, Methods of testing cement - Part 1: Determination of strength
- DIN EN 196-10, 2016 Edition, Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement
- DIN EN 413-2, 2016 Edition, Masonry cement - Part 2: Test methods
- DIN EN 998-1, 2017 Edition, Specification for mortar for masonry - Part 1: Rendering and plastering mortar
- DIN EN 998-2, 2017 Edition, Specification for mortar for masonry - Part 2: Masonry mortar
For more standards like these, please refer to our Document Center List of Standards on Cement, Gypsum, Lime, and Mortar.
Document Center, Inc. is pleased to announce that the following Standards on Transfusion, Infusion, and Injection Equipment are now available;
- BS EN ISO 1135-3, 2017 Edition, Transfusion equipment for medical use. Blood-taking sets for single use
- BS ISO 8536-6, 2016 Edition, Infusion equipment for medical use. Freeze drying closures for infusion bottles
- IEC 80369-5, Corrigendum 1 for Edition 1.0, Small-bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb cuff inflation applications
- ASTM E1939, 2017 Edition, Standard Practice for Blood Irradiation Dosimetry
For more standards like these, please refer to our Document Center List of Standards on Transfusion, Infusion, and Injection Equipment.
Document Center, Inc. is pleased to announce that the following Standards on Nuts are now available;
- BS EN 2811, 2016 Edition, Aerospace series. Nuts, hexagon, slotted/castellated in steel cadmium plated. Classification. 1 100 MPa/235 °C
- BS EN 2879, 2017 Edition, Aerospace series. Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated. Classification: 900 MPa (at ambient temperature) / 235 °C
- BS EN 3672, 2016 Edition, Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30°C swage. Classification. 1 210 MPa (at ambient temperature) / 730°C
- BS EN 4297, 2017 Edition, Aerospace series. Nuts, hexagon, self-locking by plastic ring, normal height, normal across flats, in corrosion resisting steel, passivated. Classification: 900 MPa (at ambient temperature) / 120 °C
- BS EN 4309, 2016 Edition, Aerospace series. Nuts, hexagon, self-locking by plastic ring, normal height, normal across flats, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature) / 120 °C
For more standards like these, please refer to our Document Center List of Standards on Nuts.
Document Center, Inc. is pleased to announce that the following Standards on Winter Sports Equipment are now available;
- ASTM F472, 2011 Edition Reapproved in 2011, Standard Terminology for Geometry of Alpine Skis
- ASTM F504, 2005 Edition Reapproved in 2017, Standard Test Method for Measuring the Quasi-Static Release Moments of Alpine Ski Bindings
- BS EN 16716, 2017 Edition, Mountaineering equipment. Avalanche airbag systems. Safety requirements and test methods
- BS EN ISO 10256, Withdrawn and Replaced by BS EN ISO 10256-1, Head and face protection for use in ice hockey
- BS EN ISO 10256-1, 2016 Edition, Protective equipment for use in ice hockey. General requirements
- ISO 10256, Withdrawn and Replaced by ISO 10256-1, Head and face protection for use in ice hockey
- ISO 10256-1, 1st Edition, Protective equipment for use in ice hockey - Part 1: General requirements
Document Center, Inc. is pleased to announce that the following Standards on Identification Cards and Related Devices are now available;
- BS EN 1545-2, Corrigendum 1 for 2015 Edition, Identification card systems. Surface transport applications. Transport and travel payment related data elements and code lists
- BS ISO /IEC 7812-1,2017 Edition, Identification cards. Identification of issuers. Numbering system
- BS-ISO/IEC-7812-2, 2017 Edition, Identification cards. Identification of issuers. Application and registration procedures
- BS ISO/IEC 14443-3, 2016 Edition with Amendment 1, Identification cards. Contactless integrated circuit cards. Proximity cards. Initialization and anticollision
- BS ISO/IEC 14443-4, 2016 Edition with Amendment 1, Identification cards. Contactless integrated circuit cards. Proximity cards. Transmission protocol
- BS ISO/IEC 19494-6, 2011 Edition with Amendment 2, Information technology. Biometric data interchange formats. Iris image data
- BS ISO/IEC 24779-4, 2017 Edition, Information technology. Cross-jurisdictional and societal aspects of implementation of biometric technologies. Pictograms, icons and symbols for use with biometric systems. Fingerprint applications
- ISO/IEC 24779-4, 1st Edition, Information technology - Cross-jurisdictional and societal aspects of implementation of biometric technologies - Pictograms, icons and symbols for use with biometric systems - Part 4: Fingerprint applications
For more standards like these, please refer to our Document Center List of Standards on Identification Cards and Related Devices.
