New Solar Engery Engineering Standards for the 2nd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Solar Energy Engineering are now available:

• BS EN 15316-4-3, 2017 Edition, Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Heat generation systems, thermal solar and photovoltaic systems, Module M3-8-3, M8-8-3, M11-8-3
• BS EN 62670-3, 2017 Edition, Photovoltaic concentrators (CPV). Performance testing. Performance measurements and power rating
• BS EN 62788-1-6, 2017 Edition, Measurement procedures for materials used in photovoltaic modules. Encapsulants. Test methods for determining the degree of cure in Ethylene-Vinyl Acetate
• DIN EN 12976-1, 2017 Edition, Thermal solar systems and components - Factory made systems - Part 1: General requirements
• DIN EN 12976-2, 2017 Edition, Thermal solar systems and components - Factory made systems - Part 2: Test methods
• IEC 60364-7-712, Edition 2.0, Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems
• IEC 60364-7-712-RL, Edition 2.0 Redline Version, Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems
• IEC 60904-1-1, Edition 1.0, Photovoltaic devices - Part 1-1: Measurement of current-voltage characteristics of multi-junction photovoltaic (PV) devices
• IEC 60904-8-1, Edition 1.0, Photovoltaic devices - Part 8-1: Measurement of spectral responsivity of multi-junction photovoltaic (PV) devices
• IEC 62446-3, Edition 1.0, Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 3: Photovoltaic modules and plants - Outdoor infrared thermography
• IEC 62916, Edition 1.0, Photovoltaic modules - Bypass diode electrostatic discharge susceptibility testing
• PD CEN 15316-6-7, 2017 Edition, Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Explanation and justification of EN 15316-4-4, Module M8-3-4, M8-8-4, M8-11-4
• PD IEC 62916, 2017 Edition, Photovoltaic modules. Bypass diode electrostatic discharge susceptibility testing
• UNE EN 62446-1, 2017 Edition, Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 1: Grid connected systems - Documentation, commissioning tests and inspection
• UNE EN 62788-1-2, 2017 Edition, Measurement procedures for materials used in photovoltaic modules - Part 1-2: Encapsulants - Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials
• UNE HD 60364-7-712, 2017 Edition, Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations - Photovoltaic (PV) systems
• PD CEN 15316-6-1, 2017 Edition, Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Explanation and justification of EN 15316-1, Module M3-1, M3-4, M3-9, M8-1, M8-4

For more standards like these, please refer to our Document Center List of Solar Energy Engineering Standards.     

New Applications of Information Technology Standards for the 2nd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Applications of Information Technology are now available:

• ISO/IEC 11695-3, 2nd Edition, Identification cards - Optical memory cards - Holographic recording method - Part 3: Optical properties and characteristics
• ISO/IEC 15693-3, 2nd Edition, Identification cards - Contactless integrated circuit cards - Vicinity cards - Part 3: Anticollision and transmission protocol
• ISO/IEC 15693-3-AM4, Amendment 4 (A4) for the 2nd Edition, Amendment 4: Security framework
• ISO/IEC 18013-3, 2nd Edition, Information technology - Personal identification - ISO-compliant driving licence - Part 3: Access control, authentication and integrity validation 
• ISO/IEC 19794-15, 1st Edition, Information technology - Biometric data interchange format - Part 15: Palm crease image data
• BS ISO 15836, Document withdrawn and replaced by BS ISO 15836-1, Information and documentation. The Dublin Core metadata element set. The Dublin Core metadata element set
• BS ISO 15836-1, 2017 Edition, Information and documentation. The Dublin Core metadata element set. Core elements
• ISO 15836-1, 1st Edition, Information and documentation - The Dublin Core metadata element set - Part 1: Core elements
• ASTM E1384, Document withdrawn with no replacement, Standard Practice for Content and Structure of the Electronic Health Record (EHR)
• ASTM E1633, Document withdrawn with no replacement, Standard Specification for Coded Values Used in the Electronic Health Record (Withdrawn 2017)
• BS ISO 18587, 2017 Edition, Translation services. Post-editing of machine translation output. Requirements
• IEC 62229, Edition 2.0, Multimedia systems and equipment - Multimedia e-publishing and e-book - Conceptual model for multimedia e-publishing
• ISO 18587, 1st Edition, Translation services - Post-editing of machine translation output - Requirements
• BS 10010, 2017 Edition, Information classification, marking and handling. Specification
• BS ISO 13491-2, 2017 Edition, Financial services. Secure cryptographic devices (retail). Security compliance checklists for devices used in financial transactions
• ASTM E1018, 2009 Edition Reapproved in 2013 with Editorial Correction (E1), Standard Guide for Application of ASTM Evaluated Cross Section Data File
• ISO 13399-80, 2nd Edition, Cutting tool data representation and exchange - Part 80: Creation and exchange of 3D models - Overview and principles
• BS EN 62264-3, 2017 Edition, Enterprise-control system integration. Activity models of manufacturing operations management
• BS EN ISO/ASTM 52915, 2017 Edition, Specification for additive manufacturing file format (AMF) Version 1.2
• IEC 61987-24-2,  Edition 1.0, Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2: List of properties (LOPs) of valve/actuator accessories for electronic data exchange   
• IEC 61987-24-3, Edition 1.0, Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-3: Lists of properties (LOPs) of flow modification accessories for electronic data exchange
• IEC 62657-1, 1st Edition, Industrial communication networks - Wireless communication networks - Part 1: Wireless communication requirements and spectrum considerations

For more standards like these, please refer to our Document Center List of Applications of Information Technology Standards.      

New Shipbuilding and Marine Structures Standards for the 2nd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Shipbuilding and Marine Structures are now available:

• ASTM F718, 2007 Edition Reapproved in 2017, Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet
• ASTM F992, 2017 Edition, Standard Specification for Valve Label Plates
• ASTM F1455, 1992 Edition Reapproved in 2017, Standard Guide for Selection of Structural Details for Ship Construction
• ASTM F993, 2017 Edition, Standard Specification for Valve Locking Devices
• BS ISO 18154, 2017 Edition, Ships and marine technology. Safety valve for cargo tanks of LNG carriers. Design and testing requirements
• UNE EN 16865, 2017 Edition, Inland navigation vessels - Connections and assembled hoses for the transfer of potable water
• ASTM F885, 1984 Edition Reapproved in 2017, Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS 14 to 2
• ISO 6482, 2nd Edition, Shipbuilding - Deck machinery - Warping end profiles
• IEC/PAS-63108, Edition 1.0, Electrical installation in ships - Primary DC distribution - System design architecture
• IEC 60092-376, Edition 3.0, Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V)
• IEC 60092-376-RL, Edition 3.0 Redline Version, Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V)
• UNE HD 60364-7-730, 2016 Edition, Low-voltage electrical installations - Part 7-730: Requirements for special installations or locations - Onshore units of electrical shore connections for inland navigation vessels
• IEC 62287-1, Edition 3.0, Maritime navigation and radiocommunication equipment and systems - Class B shipborne equiment of the automatic identification system (AIS) - Part 1: Carrier-sense time division multiple access (CSTDMA) techniques
• IEC 62287-1-RL, Edition 3.0 Redline Version, Maritime navigation and radiocommunication equipment and systems - Class B shipborne equiment of the automatic identification system (AIS) - Part 1: Carrier-sense time division multiple access (CSTDMA) techniques
• ASTM  F765, 1993 Edition Reapproved in 2017, Standard Specification for Wildcats, Ship Anchor Chain

For more standards like these, please refer to our Document Center List of Shipbuilding and Marine Structures Standards.   

New Leather Technology Standards for the 2nd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Leather Technology are now available: 

• ASTM D4906, 1995 Edition Reapproved in 2017, Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
• ASTM D1516, 2005 Edition Reapproved in 2017, Standard Test Method for Width of Leather
• ASTM D2617, 2017 Edition, Standard Test Method for Total Ash in Leather
• ASTM D2807, 2017A Edition, Standard Test Method for Chromic Oxide in Leather (Perchloric Acid Oxidation)
• ASTM D2868, 2017 Edition, Standard Test Method for Chromic Oxide in Leather (Perchloric Acid Oxidation)
• ASTM D3790, 2017 Edition, Standard Test Method for Volatile Matter (Moisture) of Leather by Oven Drying
• ASTM D4655, 1995 Edition Reapproved in 2017, Standard Test Methods for Sulfates in Leather (Total, Neutral, and Combined Acid)
• ASTM D6016, 2017 Edition, Standard Test Method for Determination of Nitrogen, Water Extractable in Leather
• BS EN ISO 20136, 2017 Edition, Leather. Determination of degradability by micro-organisms
• DIN EN ISO 17233, 2017 edition, Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings
• DIN EN ISO 2418, 2017 Edition, Leather - Chemical, physical and mechanical and fastness test - Sampling location
• DIN EN ISO 2420, 2017 Edition, Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area
• ASTM D5356, 2017 Edition, Standard Test Method for pH of Chrome Tanning Solutions

For more standards like these,  please refer to our Document Center List of Leather Technology Standards.     

New Open Systems Interconnection (OSI) Standards for the 2nd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Open Systems Interconnection (OSI) are now available: 

• IEC 62827-2, Edition 1.0, Wireless power transfer - Management - Part 2: Multiple device control management
• BS EN 62453-1, 2017 Edition, Field Device Tool (FDT) interface specification. Overview and guidance
• BS EN 62453-2, 2017 Edition, Field Device Tool (FDT) Interface Specification. Concepts and Detailed Description
• UNE EN 16836-1, 2017 Edition, Communication systems for meters - Wireless mesh networking for meter data exchange - Part 1: Introduction and standardization framework
• UNE EN 13836-2, 2017 Edition, Communication systems for meters - Wireless mesh networking for meter data exchange - Part 2: Networking layer and stack specification
• ISO/IEC 29181-8, 1st Edition, Information technology - Future Network - Problem statement and requirements - Part 8: Quality of Service
• ISO/IEC 29181-9, 1st Edition, Information technology - Future Network - Problem statement and requirements - Part 9: Networking of everything
• UNE EN 13836-2, 2017 Edition, Communication systems for meters - Wireless mesh networking for meter data exchange - Part 2: Networking layer and stack specification
• ISO/IEC 9594-1, 8th Edition, Information technology - Open Systems Interconnection - The Directory - Part 1: Overview of concepts, models and services
• ISO/IEC 9594-2, 8th Edition, Information technology - Open Systems Interconnection - The Directory - Part 2: Models
• ISO/IEC 9594-3, 8th Edition, Information technology - Open Systems Interconnection - The Directory - Part 3: Abstract service definition
• ISO/IEC 9594-4, 8th Edition, Information technology - Open Systems Interconnection - The Directory - Part 4: Procedures for distributed operation
• ISO/IEC 9594-5, 8th Edition, Information technology - Open Systems Interconnection - The Directory - Part 5: Protocol specifications
• ISO/IEC 9594-6, 8th Edition, Information technology - Open Systems Interconnection - The Directory - Part 6: Selected attribute types
• ISO/IEC 9594-7, 8th Edition, Information technology - Open Systems Interconnection - The Directory - Part 7: Selected object classes
• ISO/IEC 9594-8, 8th Edition, Information technology - Open Systems Interconnection - The Directory - Part 8: Public-key and attribute certificate frameworks
• ISO/IEC 9594-9, 7th Edition, Information technology - Open Systems Interconnection - The Directory - Part 9: Replication

For more standards like these, please refer to our Document Center List of Open Systems Interconnection (OSI) Standards.                

New Kitchen Equipment Standards for the 2nd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Kitchen Equipment are now available: 

• IEC 60335-2-64-2, Edition 3.0 with Amendment 2 (A2), Amendment 2 - Household and similar electrical appliances - Safety - Part 2-64: Particular requirements for commercial electric kitchen machines
• ASTM B915, 2001 Edition Reapproved in 2017, Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating
• ASTM F2800, 2011 Edition Reapproved in 2017, Standard Specification for Recirculating Hood System for Cooking Appliances
• IEC 60335-2-36, Edition 6.0, Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements
• IEC 60335-2-47-2, Edition 4.0 with Amendment 2 (A2), Amendment 2 - Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans
• IEC 60335-2-50-2, Edition 4.0 with Amendment 4 (A4), Amendment 2 - Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie
• IEC 60335-2-99-AM1, Edition 1.0 with Amendment 1 (A1), Amendment 1 - Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods
• BS IEC 60704-2-13, Edition 3.0, Household and similar electrical appliances - Test code for the determination of airborne acoustical noise. Part 2-13: Particular requirements for range hoods and other fume extractors
• IEC 60335-2-24-2, Edition 7.0, Amendment 2 - Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
• IEC 63061, Edition 1.0, Adjusted volume calculation for refrigerating appliances
• IEC 60704-2-3, Edition 3.0, Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers
• IEC 60335-2-37, Edition 6.0, Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric doughnut fryers and deep fat fryers
• IEC 60335-2-39-1, Edition 6.0 with Amendment 1 (A1), Amendment 1 - Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans
• IEC 60335-2-42-2, Edition 5.0 with Amendment  Amendment 2 - Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
• IEC 60335-2-48, Edition 4.2 with Amendments 1 & 2 consolidated, Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters
• IEC 60335-2-48-2, Edition 4.0 with Amendment 2 (A2), Amendment 2 - Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters
• ASTM F1704, 2012 Edition Reapproved in 2017, Standard Test Method for Capture and Containment Performance of Commercial Kitchen Exhaust Ventilation Systems

For more standards like these, please refer to our Document Center List of Kitchen Equipment Standards.  

New Soil Quality Standards for the 2nd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Soil Quality are now available: 

• BS ISO 10381-1, Document withdrawn and replaced by BS ISO 18400-101 & BS ISO 18400-107, Soil quality. Sampling. Guidance on the design of sampling programmes
• BS ISO 10381-2, Document withdrawn and replaced by BS ISO 18400-102, Soil quality. Sampling. Guidance on sampling techniques
• BS ISO 10381-6, Document withdrawn and replaced by BS ISO 18400-102 & BS ISO 18400-105, Soil quality. Sampling. Guidance on the collection, handling and storage of soil under aerobic conditions for the assessment of microbiological processes, biomass and diversity in the laboratory
• BS ISO 18400-100, 2017 Edition, Soil quality. Sampling. Guidance on the selection of sampling standards
• BS ISO 18400-101, 2017 Edition, Soil quality. Sampling. Framework for the preparation and application of a sampling plan
• BS ISO 18400-102, 2017 Edition, BS ISO 18400-102 Soil quality - Sampling. Part 102: Selection and application of sampling techniques
• BS ISO 18400-103, 2017 Edition, Soil quality. Sampling. Safety
• BS ISO 18400-105, 2017 Edition, Soil quality. Sampling. Packaging, transport, storage and preservation of samples
• BS ISO 18400-107, 2017 Edition, Soil quality. Sampling. Recording and reporting
• ASTM D7968, 2017A Edition, Standard Test Method for Determination of Polyfluorinated Compounds in Soil by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
• ASTM D4943, Withdrawn with no replacement, Standard Test Method for Shrinkage Factors of Soils by the Wax Method 
• ASTM D6913, 2017 Edition, Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
• ASTM D7928, 2017 Edition, Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
• BS EN ISO 11272, 2017 Edition, Soil quality. Determination of dry bulk density
• BS EN ISO 17892-5, 2017 Edition, Geotechnical investigation and testing. Laboratory testing of soil. Incremental loading oedometer test
• ASTM-D6032, 2017 Edition, Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core

For more standards like these, please refer to our Document Center List of Soil Quality Standards.

New Non-Ferrous Metals Standards for the 2nd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Non-Ferrous Metals are now available: 

• SS EN ISO 2143, Edition 1, Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2010)
• SS EN 12373-4, Edition 1, Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment
• ASTM E478, 2008 Edition Reapproved in 2017, Standard Test Methods for Chemical Analysis of Copper Alloys
• ASTM B924, 2002 Edition Reapproved in 2017, Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins
• ASTM E1587, 2017 Edition, Standard Test Methods for Chemical Analysis of Refined Nickel
• ASTM F15, 2004 Edition Reapproved in 2017, Standard Specification for Iron-Nickel-Cobalt Sealing Alloy
• ASTM F30, 1996 Edition Reapproved in 2017, Standard Specification for Iron-Nickel Sealing Alloys
• ISO 6372, 1st Edition, Nickel and nickel alloys - Terms and definitions
• ISO 6372-1, Document withdrawn and replaced by ISO 6372, Part 1: Materials, Nickel & Nickel Alloys - Terms & Definitions
• ISO 6372-2, Document withdrawn and replaced by ISO 6372, Part 2: Refinery products, Nickel & Nickel Alloys - Terms & Definitions
• BS ISO 6372, 2017 Edition, Nickel and nickel alloys. Terms and definitions
• ASTM B476, 2001 Edition Reapproved in 2017, Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
• ASTM B477, 1997 Edition Reapproved in 2017, Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy
• ASTM B522, 2001 Edition Reapproved in 2017, Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy
• ASTM B563, 2001 Edition Reapproved in 2017, Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy
• ASTM B596, 1989 Edition Reapproved in 2017, Standard Specification for Gold-Copper Alloy Electrical Contact Material
• ASTM B671, 1981 Edition Reapproved in 2017, Standard Specification for Refined Iridium
• ASTM E1335, 2008 Edition Reapproved in 2017, Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis

For more standards like these, please refer to our Document Center List of Non-Ferrous Metals Standards.     

New Quality Standards for the 2nd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Quality are now available: 

• BS 5760-13.5, Document withdrawn with no replacement, Reliability of systems, equipment and components. Guide to reliability test conditions for consumer equipment. Ground mobile equipment. Low degree of simulation
• BS EN 62550, 2017 Edition, Spare parts provisioning
• ASTM F1423, Document withdrawn with no replacement, Standard Practice for Determination of the Quality of Monochrome Images Produced from Non-Impact Personal Computer Printers (Withdrawn 2017)
• ISO 10007, 3rd Edition, Quality management - Guidelines for configuration management
• SIS ISO/TS 9002, Edition 1, Quality management systems - Guidelines for the application of ISO 9001:2015
• UNE EN ISO 22870, 2017 Edition, Point-of-care testing (POCT) - Requirements for quality and competence
• BS ISO 10007, 2017 Edition, Quality management. Guidelines for configuration management.
• ASTM D6300, 2017A Edition, Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
• ASTM E1359, 2017 Edition, Standard Guide for Auditing and Evaluating Capabilities of Nondestructive Testing Agencies
• ASTM E2212, Document withdrawn with no replacement, Standard Practice for Healthcare Certificate Policy (Withdrawn 2017)
• ISO/IEC 17026 SPANIS, 1st Edition - Spanish Language, Conformity assessment - Example of a certification scheme for tangible products
• ISO 17034 SPANISH, 1st Edition - Spanish Language, General requirements for the competence of reference material producers
• ASTM E1212, 2017 Edition, Standard Practice for Establishing Quality Management Systems for Nondestructive Testing Agencies
• BS ISO/IEC 20000-6, 2017 Edition, Information technology. Service management. Requirements for bodies providing audit and certification of service management systems
• ISO/IEC 20000-6, 1st Edition, Information technology - Service management - Part 6: Requirements for bodies providing audit and certification of service management systems
• ASTM E122, 2017 Edition, Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
• BS ISO 7870-8, 2017 Edition, Control charts. Charting techniques for short runs and small mixed batches
• ISO 11843-5, 1st Edition, Capability of detection -- Part 5: Methodology in the linear and non-linear calibration cases
• ISO 7870-8, 1st Edition, Control charts - Part 8: Charting techniques for short runs and small mixed batches
• ISO 11843-5-AM1, 1st Edition with Amendment 1 (A1), AMENDMENT 1, Part 5: Methodology in the linear and non-linear calibration cases, Capability of detection

For more standards like these, please refer to our Document Center List of Quality Standards.

            

New Electromagnetic Compatibility Including Radio Interference Standards for the 2nd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Electromagnetic Compatibility Including Radio Interference are now available: 

• BS EN 61000-4-1, Document withdrawn with no replacement, Electromagnetic compatibility (EMC). Testing and measurement techniques. Overview of IEC 61000-4 series
• BS EN 61000-4-24, Document withdrawn with no replacement, Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP conducted disturbance. Basic EMC publication
• SS EN 13309, Edition 2, Construction machinery - Electromagnetic compatibility of machines with internal power supply
• IEC 60782-12, Edition 2.20, Cable networks for television signals, sound signals and interactive services - Part 12: Electromagnetic compatibility of systems
• IEC 61000-3-11, Edition 2.0, Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current = 75 A and subject to conditional connection
• IEC 61000-3-11-RL, Edition 2.0, Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current = 75 A and subject to conditional connection
• IEC 61000-3-3-1, Edition 3.0 with Amendment 1 (A1), Amendment 1 - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current = 16 A per phase and not subject to conditional connection
• SS EN 55014-1, Edition 4, Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
• DD IEC 62370, Document withdrawn and replaced by PD IEC 62370, Electroacoustics. Instruments for the measurement of sound intensity. Electromagnetic and electrostatic compatability requirements and test procedures
• IEC 61000-4-31, Edition 2.0 with Amendment 1 (A1), Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
• IEC 61000-5-10, Edition 1.0, Electromagnetic compatibility (EMC) - Part 5-10: Installation and mitigation guidelines - Guidance on the protection of facilities against HEMP and IEMI
• SS EN 55024, Edition 2 with Amendment 1 (A1), Information technology equipment - Immunity characteristics - Limits and methods of measurement
• BS EN 61000-4-1, Document withdrawn with no replacement, Electromagnetic compatibility (EMC). Testing and measurement techniques. Overview of IEC 61000-4 series
• IEC 61326-3-1, Edition 2.0, Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications
• IEC 61326-3-1-RL, Edition 2.0, Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications
• IEC 61326-3-2, Edition 2.0, Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment
• IEC 61326-3-2-RL, Edition 2.0, Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment
• DD IEC 62370, Document withdrawn and replaced by PD IEC 62370, Electroacoustics. Instruments for the measurement of sound intensity. Electromagnetic and electrostatic compatability requirements and test procedures
• PD IEC 62370, 2004 Edition with Amendment 1 (A1) Interfiled, Electroacoustics. Instruments for the measurement of sound intensity. Electromagnetic and electrostatic compatibility requirements and test procedures

For more standards like these, please refer to our Document Center List of Electromagnetic Compatibility Including Radio Interference Standards. 

New Small Containers for Transportation of Fluids And Bulk Materials Standards for the 2nd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Small Containers for Transportation of Fluids and Bulk Materials are now available: 

• UNE EN 13160-1, 2017 Edition, Leak detection systems - Part 1: General Principles
• UNE EN 13160-2, 2017 Edition, Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems
• UNE EN 13160-4, 2017 Edition, Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems
• UNE EN 13160-6, 2017 Edition, Leak detection systems - Part 6: Sensors in monitoring wells
• ASTM F2438, 2004 Edition Reapproved in 2017, Standard Specification for Oil Spill Response Boom Connection: Slide Connector
• UNE EN 13121-3, 2017 Edition, GRP tanks and vessels for use above ground - Part 3: Design and workmanship
• ASTM F2773, 2013 Edition Reapproved in 20107, Standard Practice for Transfilling Compressed Air or Nitrogen and Safe Handling of Small Paintball Cylinders
• DIN EN 13110, 2017 Edition, LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction
• DIN EN 13807, 2017 Edition, Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing
• BS EN 1442, 2017 Edition, LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Design and construction
• BS EN ISO 11114-1, 2012 Edition with Amendment 1, Gas cylinders. Compatibility of cylinder and valve materials with gas contents. Metallic materials
• BS EN ISO 11114-4, 2017 Edition, Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Test methods for selecting steels resistant to hydrogen embrittlement
• ISO 11114-4, 2nd Edition, Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
• ISO 15453. 1st Edition, Gas cylinders - Seamless steel and aluminium-alloy gas cylinders - Evaluation of existing gas cylinders and consideration of their safe use in other jurisdictions
• ISO 19811, 1st Edition, Gas cylinders - Service life testing for cylinders and tubes of composite construction
• BS ISO 23208, 2017 Edition, Cryogenic vessels. Cleanliness for cryogenic service
• ISO 23208, 2nd Edition, Cryogenic vessels - Cleanliness for cryogenic service
• UNE EN ISO 21028-1, 2017 Edition, Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C

For more standards like these, please refer to our Document Center List of Small Containers for Transportation of Fluids And Bulk Materials Standards.     

New Installations in Buildings Burners and Boilers Standards for the 2nd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Installations in Buildings Burners and Boilers are now available: 

• BS EN 12098-1, 2017 Edition, Energy Performance of Buildings. Controls for heating systems. Control equipment for hot water heating systems. Modules M3-5, 6, 7, 8
• BS EN 15316-2, 2017 Edition, Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Space emission systems (heating and cooling), Module M3-5, M4-5
• BS EN 15316-2-1, Withdrawn and replaced by BS EN 15316-2, Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Space heating emission systems
• BS EN 15316-2-3, Withdrawn and replaced by BS EN 15316-3, Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Space heating distribution systems
• BS EN 15316-3, 2017 Edition, Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies. - Part 3: Space distribution systems (DHW, heating and cooling), Module M3-6, M4-6, M8-6
• BS EN 15316-3-2, Withdrawn and replaced by BS EN 15316-3, Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Domestic hot water systems, distribution
• BS EN 15316-4-2, 2017 Edition, Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Space heating generation systems, heat pump systems, Module M3-8-2, M8-8-2
• BS EN 15316-4-5, 2017 Edition, Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. District heating and cooling, Module M3-8-5, M4-8-5, M8-8-5, M11-8-5
• BS EN 15316-4-6, Withdrawn and replaced by BS EN 15316-4-3, Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Heat generation systems, photovoltaic systems
• BS EN 15316-4-8, 2017 Edition, Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Space heating generation systems, air heating and overhead radiant heating systems, including stoves (local), Module M3-8-8
• BS EN 15459, Withdrawn and replaced by BS EN 15459-1, Energy performance of buildings. Economic evaluation procedure for energy systems in buildings
• BS EN 15459-1, 2017 Edition, Energy performance of buildings. Economic evaluation procedure for energy systems in buildings. Calculation procedures, Module M1-14
• BS EN 15316-4-3, 2017 Edition, Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Heat generation systems, thermal solar and photovoltaic systems, Module M3-8-3, M8-8-3, M11-8-3
• PD CEN 12831-4, 2017 Edition, Energy performance of buildings. Method for calculation of the design heat load. Explanation and justification of EN 12831-3, Module M8-2, M8-3
• PD CEN 15316-6-1, 2017 Edition, Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Explanation and justification of EN 15316-1, Module M3-1, M3-4, M3-9, M8-1, M8-4
• PD CEN 15316-6-10, 2017 Edition, Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Explanation and justification of EN 15316-5, Module M3-7, M8-7
• PD CEN 15316-6-5, 2017 Edition, Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Explanation and justification of EN 15316-4-2, Module M3-8
• PD CEN 15378-2, 2017 Edition, Energy performance of buildings. Heating systems and DHW in buildings. Explanation and justification of EN 15378-1, Module M3-11 and M8-11
• PD CLC 50612, 2016 Edition, Portable electrical apparatus for the measurement of combustion flue gas parameters. Guide to their use in the process of commissioning, servicing and maintaining gas fired appliances
• PD CEN 15316-6-7, 2017 Edition, Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Explanation and justification of EN 15316-4-4, Module M8-3-4, M8-8-4, M8-11-4
• ASTM F1704, 2012 Edition Reapproved in 2017, Standard Test Method for Capture and Containment Performance of Commercial Kitchen Exhaust Ventilation Systems
• ASTM F2975, 2012 Edition Reapproved in2017, Standard Test Method for Measuring the Field Performance of Commercial Kitchen Ventilation Systems
• BS EN 15500-1, 2017 Edition, Energy Performance of Buildings. Control for heating, ventilating and air conditioning applications. Electronic individual zone control equipment. Modules M3-5, M4-5, M5-5
• JIS A 4009, For 2017 Edition please review JIS-A-4009 JAPANESE, Components of air duct
• UNE 100030, 2017 Edition Spanish Language only, Guidelines for prevention and control of proliferation and spread of Legionella in facilities
• BS EN 15316-3, 2017 Edition, Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies. - Part 3: Space distribution systems (DHW, heating and cooling), Module M3-6, M4-6, M8-6
• BS EN 15316-4-5, 2017 Edition, Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. District heating and cooling, Module M3-8-5, M4-8-5, M8-8-5, M11-8-5

For more standards like these, please refer to our Document Center List of Installations in Buildings and Boilers Standards.        

New Fasteners Related To Surgery, Prosthetics And Orthotics Standards for the 2nd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Fasteners Related to Surgery, Prosthetics and Orthotics are now available: 

• ASME B18.18, 2017 Edition, Quality Assurance for Fasteners
• ASTM A320, 2017A Edition, Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
• ASTM A453, 2017 Edition, Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
• ASTM A962, 2017 Edition, Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
• ASTM F1667, 2017 Edition, Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
• ASTM F2437, 2017 Edition, Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
• ASTM F959, 2017 Edition, Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series   
• ASTM G198, 2017 Edition, Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood
• ASTM F1789, 2017 Edition, Standard Terminology for F16 Mechanical Fasteners
• ASME B18.11, 1961 Edition Reaffirmed in 2107, Miniature Screws
• ASME B18.2.8, 1999 Edition Reaffirmed in 2017, Clearance Holes for Bolts Screws and Studs 
• ASME B18.2.9, 2010 Edition Reaffirmed in 2017, Straightness Gage and Gaging for Bolts and Screws
• ASME B18.6.8, 2010 Edition Reaffirmed in 2017, Thumb Screws and Wing Screws (Inch Series)
• ASTM A307, 2014 Edition with an Editorial Correction (E1), Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
• ASTM A574, 2017 Edition, Standard Specification for Alloy Steel Socket-Head Cap Screws
• ASTM F1554, 2015 Edition with an Editorial Correction (E2), Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength   
• ASTM F3148, 2017A Edition, Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions
• ASTM F593, 2017 Edition, Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
• ASTM F912, 2011 Edition Reapproved in 2017, Standard Specification for Alloy Steel Socket Set Screws
• JIS B 1174, 2017 Edition, Hexagon socket button head screws
• ASME B18.16.6, 2017 Edition, Prevailing Torque Locknuts (Inch Series)
• ASME B18.2.3.4M, Withdrawn with no replacement, Metric Hex Flange NutsASME
• ASME B18.2.4.3M, 1979 Edition Reaffirmed in 2017, Metric Slotted Hex Nuts
• ASME B18.6.9, 2010 Edition, Wing Nuts (Inch Series)
• ASTM A194, 2017 Edition, Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
• ASME B18.22M, 1981 Edition Reaffirmed in 2017, Metric Plain Washers
• ASTM F1575, 2017 Edition, Standard Test Method for Determining Bending Yield Moment of Nails
• ASTM F680, 2017 Edition, Standard Test Methods for Nails

For more standards like these, please refer to our Document Center List of Fasteners Related to Surgery, Prosthetics and Orthotics.