New Vibrations, Shock and Vibration Measurements Including Measuring Instruments and Installations Vibrations and Shock With Respect to Human Beings Standards for the 3rd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Vibrations, Shock and Vibration Measurements Including Measuring Instruments and Installations Vibrations and Shock With Respect to Human Beings are now available:

• ASTM F2070, 2000 Edition Reapproved in 2017, Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic
• BS 7882, 2017 Edition, Method for calibration and classification of torque measuring devices
• BS EN 12438, 2017 Edition, Magnesium and magnesium alloys. Magnesium alloys for cast anodes
• BS ISO 10816-2, Withdrawn and replaced by BS ISO 20816-2, Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
• BS ISO 13373-7, 2017 Edition, Condition monitoring and diagnostics of machines. Vibration condition monitoring. Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants
• BS ISO 16063-45, 2017 Edition, Methods for the calibration of vibration and shock transducers. Part 45: In-situ calibration of transducers with built in calibration coil
• BS ISO 20816-2, 2017 Edition, Mechanical vibration. Measurement and evaluation of machine vibration. Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
• BS ISO 7919-2, Withdrawn and replaced by BS ISO 20816-2, Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts. Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
• BS ISO 8528-9, 2017 Edition, Reciprocating internal combustion engine driven alternating current generating sets. Measurement and evaluation of mechanical vibrations
• ISO 10816-3, 2nd Edition, Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
• ISO 10816-3-AM1, Amendment 1 for 2nd Edition, AMENDMENT 1, Part 3: Inustirlal with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ, Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts
• ISO 10816-4, 2nd Edition, Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 4: Gas turbine sets with fluid-film bearings
• ISO 13373-7, 1st Edition, Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants
• ISO 7919-3, 2nd Edition, Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 4: Gas turbine sets with fluid-film bearings 
• ISO 7919-3-AM1, Amendment 1 for 2nd Edition, AMENDMENT 1, Part 3: Coupled industrial machines, Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts
• ISO 7919-4, 2nd Edition, Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 4: Gas turbine sets with fluid-film bearings
• ISO 8528-9, 2nd Edition, Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations
• ISO 10816-4-AM1, Amendment 1 for 2nd Edition, AMENDMENT 1, Part 4: Gas turbine sets with fluid-film bearings, Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts  
• ISO 20816-2, 1st Edition, Mechanical vibration - Measurement and evaluation of machine vibration - Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
• ISO 7919-4-AM1, Amendment 1 for 2nd Edition, AMENDMENT 1, Part 4: Gas turbine sets with fluid-film bearings, Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts
• PD ISO 19664, 2017 Edition, Human response to vibration. Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety

For more standards like these, please refer to Document Center's List of Vibrations, Shock and Vibration Measurements Including Measuring Instruments and Installations Vibrations and Shock With Respect to Human Beings Standards.

New Solar Energy Engineering Including Photovoltaic Energy Systems Standards for the 3rd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Solar Energy Engineering Including Photovoltaic Energy Systems are now available:

• BS EN 61215-1-1, Corrigendum 1 for 2016 Edition, Terrestrial photovoltaic (PV) modules. Design qualification and type approval. Special requirements for testing of crystalline silicon photovoltaic (PV) modules
• BS EN 61215-1-2, 2017 Edition, Terrestrial photovoltaic (PV) modules - Design qualification and type approval. Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules
• BS EN 61215-1-3, 2017 Edition, Terrestrial photovoltaic (PV) modules - Design qualification and type approval. Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
• BS EN 61215-1-4, 2017 Edition, Terrestrial photovoltaic (PV) modules. Design qualification and type approval. Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules
• BS EN 61646, Withdrawn and replaced by BS EN 61215-1-2, 1-3, and 1-4, Thin-film terrestrial photovoltaic (PV) modules. Design qualification and type approval
• IEC/PAS 62257-10, Edition 1.0, Recommendations for renewable energy and hybrid systems for rural electrification - Part 10: Silicon solar module visual inspection guide
• IEC 62257-7, Edition 2.0, Recommendations for renewable energy and hybrid systems for rural electrification - Part 7: Generators
• IEC 62257-7-RL, Edition 2.0 Redline Version, Recommendations for renewable energy and hybrid systems for rural electrification - Part 7: Generators
• IEC 62688, Edition 1.0, Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification
• IEC 62788-1-5, Edition 1.0, Measurement procedures for materials used in photovoltaic modules - Part 1-5: Encapsulants - Measurement of change in linear dimensions of sheet encapsulation material resulting from applied thermal conditions
• IEC 62788-2, Edition 1.0, Measurement procedures for materials used in photovoltaic modules - Part 2: Polymeric materials - Frontsheets and backsheets
• IEC 62788-7-2, Edition 1.0, Measurement procedures for materials used in photovoltaic modules - Part 7-2: Environmental exposures - Accelerated weathering tests of polymeric materials
• IEC 62805-2, Edition 1.0, Method for measuring photovoltaic (PV) glass - Part 2: Measurement of transmittance and reflectance
• IEC 62817-AM1, Amendment 1 for Edition 1.0, Amendment 1 - Photovoltaic systems - Design qualification of solar trackers 
• IEC 62920, Edition 1.0, Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment
• IEC 62979, Edition 1.0, Photovoltaic modules - Bypass diode - Thermal runaway test
• IEC 63049, Edition 1.0, Terrestrial photovoltaic (PV) systems - Guidelines for effective quality assurance in PV systems installation, operation and maintenance
• PD CEN 15316-6-6, 2017 Edition, Energy performance of buildings. Method for calculation of system energy performance and system efficiencies. Explanation and justification of EN 15316-4-3, Module M3-8-3, M8-8-3
• PD CEN 15316-6-9, 2017 Edition, Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Explanation and justification of EN 15316-4-8, Module M3-8-8
• PD IEC 62446-3, 2017 Edition, Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance. - Part 3: Photovoltaic modules and plants - Outdoor infrared thermography
• PD IEC 62788-2, 2017 Edition, Measurement procedures for materials used in photovoltaic modules. Polymeric materials. Frontsheets and backsheets 

For more standards like these, please refer to our Document Center List of Solar Energy Engineering Including Photovoltaic Energy Systems Standards. 

New Electrical Engineering in General Standards for the 3rd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Electrical Engineering in General are now available:

• AS/NZS 4417.2, 2012 Edition, Regulatory compliance mark for electrical and electronic equipment - Specific requirements for particular regulatory applications
• BS EN 60950-22, 2017 Edition, Information technology equipment. Safety. Equipment to be installed outdoors
• BS EN 62561-1, 2017 Edition, Lightning protection system components (LPSC). Requirements for connection components
• IEC/PAS 62569-1, Withdrawn and replaced by IEC 62569-1, Generic specification of information on products - Part 1: Principles and methods
• IEC 62561-4, Edition 2.0, Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners
• IEC 62561-5, Edition 2.0, Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals
• BS EN 60695-11-5, 2017 Edition, Fire hazard testing. Test flames. Needle-flame test method. Apparatus, confirmatory test arrangement and guidance
• BS EN 60695-1-30, 2017 Edition, Fire hazard testing. Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process. General guidelines
• BS EN 62745, 2017 Edition, Safety of machinery. Requirements for cableless control systems of machinery
• IEC 60050-161-AM7, Amendment 7 for Edition 1.0, Amendment 7 - International electrotechnical vocabulary - Part 161: Electromagnetic compatibility
• IEC 60050-702-AM3, Amendment 3 for Edition 1.0, Amendment 3 - International electrotechnical vocabulary - Part 702: Oscillations, signals and related devices
• IEC 60050-721-AM2, Amendment 2 for Edition 1.0, Amendment 2 - International electrotechnical vocabulary - Part 705: Radio wave propagation
• IEC 62569-1, Edition 1.0, Generic specification of information on products by properties - Part 1: Principles and methods
• IEC 60445, Edition 6.0, Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
• IEC 60445-RL, Edition 6.0, Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors

For more standards like these, please refer to our Document Center List of Electrical Engineering in General Standards.  

New Networking Including Land Area Networks (LAN), Metropolitan Area Networks (MAN), Wide Area Networks (WAN), Etc. Standards for the 3rd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Networking Including Land Area Networks (LAN), Metropolitan Area Networks (MAN), Wide Area Networks (WAN), Etc. are now available:

• ISO/IEC/IEEE8802-1AB, 2nd Edition, Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 1AB: Station and media access control connectivity discovery
• ISO/IEC/IEEE 8802-1Q, Amendment 5 for 1st Edition, Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 1Q: Bridges and bridged networks
• IEC 62056-4-7, Edition 1.0, Electricity metering data exchange - The DLMS/COSEM suite - Part 4-7: DLMS/COSEM transport layer for IP networks
• IEC 62056-6-1, Edition 3.0, Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identification System (OBIS)
• IEC 62056-6-2, Edition 3.0, Electricity metering data exchange - The DLMS/COSEM suite - Part 6-2: COSEM interface classes
• IEC 62056-8-5, Edition 1.0, Electricity metering data exchange - The DLMS/COSEM suite - Part 8-5: Narrow-band OFDM G3-PLC communication profile for neighbourhood networks
• IEC 62443-2-4-AM1, Amendment 1 for Edition 1.0, Amendment 1 - Security for industrial automation and control systems - Part 2-4: Security program requirements for IACS service providers
• IEC 62608-2, Edition 1.0, Multimedia home network configuration - Basic reference model - Part 2: Operational model
• PD IEC 63094, 2017 Edition, Multimedia systems and equipment. Multimedia signal transmission. Dependable line code with error correction
• IEC 62481-10, Edition 1.0, Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 10: Low-power mode
• IEC 62481-1-1, Edition 1.0, Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 1-1: Architecture and protocols - Core architecture and protocols
• IEC 62481-1-2, Edition 1.0, Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 1-2: Architecture and protocols - Extended Digital Media Renderer
• IEC 62481-1-3, Edition 1.0, Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 1-3: Architectures and protocols - Cloud access
• IEC 62481-2, Edition 3.0, Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 2: Media format profiles
• IEC 62481-3, Edition 3.0, Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 3: DLNA link protection
• IEC 62481-4, Edition 2.0, Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 4: DRM interoperability solutions   
• IEC 62481-5, Edition 2.0, Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 5: Device Profiles
• IEC 62481-6-1, Edition 1.0, Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 6-1: Remote User Interface - HTML5
• IEC 62481-6-2, Edition 1.0, Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 6-2: Remote user interface - RVU
• IEC 62481-7, Edition 1.0, Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 7: Authentication
• IEC 62481-8, Edition 1.0, Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 8: Diagnostics
• IEC 62481-9, Edition 1.0, Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 9: HTTP Adaptive Delivery
• BS EN 62056-8-6, 2017 Edition, Electricity metering data exchange. The DLMS/COSEM suite. High speed PLC ISO/IEC 12139-1 profile for neighbourhood networks

For more standards like these, please refer to our Document Center List of Networking Including Land Area Networks (LAN), Metropolitan Area Networks (MAN) Wide Area Networks (WAN), Etc. Standards.       

New Interface and Interconnection Equipment Standards for the 3rd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Interface and Interconnection Equipment are now available:

• BS ISO/IEC 14543-5-8, 2017 Edition, Information technology. Home electronic systems (HES) architecture. Intelligent grouping and resource sharing for HES Class 2 and Class 3. Remote access core protocol
• BS ISO/IEC 14543-5-9, 2017 Edition, Information technology. Home electronic systems (HES) architecture. Intelligent grouping and resource sharing for HES Class 2 and Class 3. Remote access service platform
• BS ISO/IEC 29341-1-2, 2017 Edition, Information technology. UPnP Device Architecture. UPnP Device Architecture Version 2.0
• BS ISO/IEC 29341-301, 2017 Edition, Information technology. UPnP Device Architecture. IoT management and control device control protocol. IoT management and control architecture overview
• ISO/IEC 11801-9902, Edition 1.0, Information technology - Generic cabling for customer premises - Part 9902: Specifications for End-to-end link configurations
• ISO/IEC 14543-5-8, Edition 1.0, Information technology - Home electronic systems (HES) architecture - Part 5-8: Intelligent grouping and resource sharing for HES Class 2 and Class 3 - Remote access core protocol
• ISO/IEC 14543-5-9, Edition 1.0, Information technology - Home electronic systems (HES) architecture - Part 5-9: Intelligent grouping and resource sharing for HES class 2 and class 3 - Remote access service platform
• ISO/IEC 29341-20-1, 1st Edition, Information technology - UPnP Device Architecture - Part 20-1: Audio video device control protocol - Level 4 - Audio video architecture
• ISO/IEC 29341-20-10, 1st Edition, Information technology - UPnP Device Architecture - Part 20-10: Audio video device control protocol - Level 4 - Audio video transport service
• ISO/IEC 29341-20-11, 1st Edition, Information technology - UPnP Device Architecture - Part 20-11: Audio video device control protocol - Level 4 - Connection manager service
• ISO/IEC 29341-20-12, 1st Edition, Information technology - UPnP Device Architecture - Part 20-12: Audio video device control protocol - Level 4 - Content directory service
• ISO/IEC 29341-20-13, 1st Edition, Information technology - UPnP Device Architecture - Part 20-13: Audio video device control protocol - Level 4 - Rendering control service
• ISO/IEC 29341-20-14, 1st Edition, Information technology - UPnP Device Architecture - Part 20-14: Audio video device control protocol - Level 4 - Scheduled recording service
• ISO/IEC 29341-20-2, 1st Edition, Information technology - UPnP Device Architecture - Part 20-2: Audio video device control protocol - Level 4 - Media renderer device
• ISO/IEC 29341-20-3, 1st Edition, Information technology - UPnP Device Architecture - Part 20-3: Audio video device control protocol - Level 4 - Media server device
• ISO/IEC 29341-20-4, 1st Edition, Information technology - UPnP Device Architecture - Part 20-4: Audio video device control protocol - Level 4 - Datastructure template
• ISO/IEC 29341-24-1, Information technology - UPnP Device Architecture - Part 24-1: Internet gateway device control protocol - Level 2 - Internet gateway device   
• ISO/IEC 29341-24-10, 1st Edition, Information technology - UPnP Device Architecture - Part 24-10: Internet gateway device control protocol - Level 2 - Wide area network internet protocol - Connection service
• ISO/IEC 29341-24-11, 1st Edition, Information technology - UPnP Device Architecture - Part 24-11: Internet gateway device control protocol - Level 2 - Wide area network internet protocol v6 - Firewall control service
• ISO/IEC 29341-24-2, 1st Edition, Information technology - UPnP Device Architecture - Part 24-2: Internet gateway device control protocol - Level 2 - Wide area network connection device
• ISO/IEC 29341-24-3, 1st Edition, Information technology - UPnP Device Architecture - Part 24-3: Internet gateway device control protocol - Level 2 - Wide area network device
• ISO/IEC 29341-26-1, 1st Edition, Information technology - UPnP Device Architecture - Part 26-1: Telephony device control protocol - Level 2 - Telephony architecture
• ISO/IEC 29341-26-10, 1st Edition, Information technology - UPnP Device Architecture - Part 26-10: Telephony device control protocol - Level 2 - Call management service
• ISO/IEC 29341-26-11, 1st Edition, Information technology - UPnP Device Architecture - Part 26-11: Telephony device control protocol - Level 2 - Media management service
• ISO/IEC 29341-26-12, 1st Edition, Information technology - UPnP Device Architecture - Part 26-12: Telephony device control protocol - Level 2 - Messaging service
• ISO/IEC 29341-26-13, 1st Edition, Information technology - UPnP Device Architecture - Part 26-13: Telephony device control protocol - Level 2 - Phone management service
• ISO/IEC 29341-26-14, 1st Edition, Information technology - UPnP Device Architecture - Part 26-14: Telephony device control protocol - Level 2 - Address book service
• ISO/IEC 29341-26-15, 1st Edition, Information technology - UPnP Device Architecture - Part 26-15: Telephony device control protocol - Level 2 - Calendar service
• ISO/IEC 29341-26-16, 1st Edition, Information technology - UPnP Device Architecture - Part 26-16: Telephony device control protocol - Level 2 - Presence service
• ISO/IEC 29341-26-2, 1st Edition, Information technology - UPnP Device Architecture - Part 26-2: Telephony device control protocol - Level 2 - Telephony client device
• ISO/IEC 29341-26-3, 1st Edition, Information technology - UPnP Device Architecture - Part 26-3: Telephony device control protocol - Level 2 - Telephony server device
• ISO/IEC 29341-27-1, 1st Edition, Information technology - UPnP Device Architecture - Part 27-1: Friendly device control protocol - Friendly information update service
• ISO/IEC 29341-28-1, 1st Edition, Information technology - UPnP Device Architecture - Part 28-1: Multiscreen device control protocol - Multiscreen architecture
• ISO/IEC 29341-28-10, 1st Edition, Information technology - UPnP Device Architecture - Part 28-10: Multiscreen device control protocol - Application management service
• ISO/IEC 29341-28-2, 1st Edition, Information technology - UPnP Device Architecture - Part 28-2: Multiscreen device control protocol - Screen device
• ISO/IEC 29341-29-10, 1st Edition, Information technology - UPnP Device Architecture - Part 29-10: Multiscreen device control protocol - Level 2 - Application management service
• ISO/IEC 29341-31-1, 1st Edition, Information technology - UPnP Device Architecture - Part 31-1: Energy management device control protocol - Energy management service
• IEC 62680-1-3, Edition 2.0, Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-CTM Cable and Connector Specification

For more standards like these, please refer to our Document Center List of Interface and Interconnection Equipment Standards.              

New Earth-Moving Machinery Including Tractors, Excavators, Loaders, Graders, Etc. Standards for the 3rd Quarter 2017

Document Center Inc. is pleased to announce that the following New Standards on Earth-Moving Machinery Including Tractors, Excavators, Loaders, Graders, Etc. are now available:

• BS ISO 10987-2, 2017 Edition, Earth-moving machinery. Sustainability. Remanufacturing
• BS ISO 10987-3, 2017 Edition, Earth-moving machinery. Sustainability. Used machines
• BS ISO 20474-1, 2017 Edition, Earth-moving machinery. Safety. General requirements
• BS ISO 20474-10, 2017 Edition, Earth-moving machinery. Safety. Requirements for trenchers
• BS ISO 20474-11, 2017 Edition, Earth-moving machinery. Safety. Requirements for landfill compactors
• BS ISO 20474-12, 2017 Edition, Earth-moving machinery. Safety. Requirements for cable excavators
• BS ISO 20474-13, 2017 Edition, Earth-moving machinery. Safety. Requirements for rollers
• BS ISO 20474-2, 2017 Edition, Earth-moving machinery. Safety. Requirements for dozers
• BS ISO 20474-3, 2017 Edition, Earth-moving machinery. Safety. Requirements for loaders
• BS ISO 20474-4, 2017 Edition, Earth-moving machinery. Safety. Requirements for backhoe loaders
• BS ISO 20474-5, 2017 Edition, Earth-moving machinery. Safety. Requirements for hydraulic excavators
• BS ISO 20474-6, 2017 Edition, Earth-moving machinery. Safety. Requirements for dumpers
• BS ISO 20474-7, 2017 Edition, Earth-moving machinery. Safety. Requirements for scrapers
• BS ISO 20474-8, 2017 Edition, Earth-moving machinery. Safety. Requirements for graders
• BS ISO 20474-9, 2017 Edition, Earth-moving machinery. Safety. Requirements for pipelayers
• ISO 10987-2, 1st Edition, Earth-moving machinery - Sustainability - Part 2: Remanufacturing
• ISO 10987-3, 1st Edition, Earth-moving machinery - Sustainability - Part 3: Used machines
• ISO 20474-1, 2nd Edition, Earth-moving machinery - Safety - Part 1: General requirements
• ISO 20474-10, 2nd Edition, Earth-moving machinery - Safety - Part 10: Requirements for trenchers
• ISO 20474-11, 2nd Edition, Earth-moving machinery - Safety - Part 11: Requirements for landfill compactors
• ISO 20474-12, 2nd Edition, Earth-moving machinery - Safety - Part 12: Requirements for cable excavators 
• ISO 20474-13, 2nd Edition, Earth-moving machinery - Safety - Part 13: Requirements for rollers
• ISO 20474-2, 2nd Edition, Earth-moving machinery - Safety - Part 2: Requirements for dozers
• ISO 20474-3, 2nd Edition, Earth-moving machinery - Safety - Part 3: Requirements for loaders
• ISO 20474-4, 2nd Edition, Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders
• ISO 20474-5, 2nd Edition, Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
• ISO 20474-6, 2nd Edition, Earth-moving machinery - Safety - Part 6: Requirements for dumpers
• ISO 20474-7, 2nd Edition, Earth-moving machinery - Safety - Part 7: Requirements for scrapers
• ISO 20474-8, 2nd Edition, Earth-moving machinery - Safety - Part 8: Requirements for graders
• ISO 20474-9, 2nd Edition, Earth-moving machinery - Safety - Part 9: Requirements for pipelayers
• ISO 7131-1, Amendment 1 for 3rd Edition, AMENDMENT 1, Earth-moving machinery - Loaders - Terminology and commercial specifications
• ISO 7131, 3rd Edition, Earth-moving Machinery - Loaders - Terminology & Commercial Specifications

For more standards like these, please refer to our Document Center List of Earth-Moving Machinery Including Tractors, Excavators, Loaders, Graders, Etc. Standards.