New FDA Medical Device Guidance Documents for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New FDA Guidance Documents are now available:

• General Wellness: Policy for Low Risk Devices - Draft Guidance for Industry and Food and Drug Administration Staff
• Mitigating the Risk of Cross-Contamination from Valves and Accessories Used for Irrigation through Flexible Gastrointestinal Endoscopes - Draft Guidance for Industry and Food and Drug Administration Staff
• Medical Device Accessories: Defining Accessories and Classification Pathway for New Accessory Types - Draft Guidance for Industry and Food and Drug Administration Staff
• Medical Devices and Clinical Trial Design for the Treatment or Improvement in the Appearance of Fungally-Infected Nails - Draft Guidance for Industry and Food and Drug Administration Staff 
• Current Good Manufacturing Practice Requirements for Combination Products: Draft Guidance for Industry and FDA Staff
• Premarket Studies of Implantable Minimally Invasive Glaucoma Surgical (MIGS) Devices - Draft Guidance for Industry and Food and Drug Administration Staff
• Medical Device Data Systems, Medical Image Storage Devices, and Medical Image Communications Devices - Guidance for Industry and Food and Drug Administration Staff
• Mobile Medical Applications - Guidance for Industry and Food and Drug Administration Staff
• Safety Considerations to Mitigate the Risks of Misconnections with Small-bore Connectors Intended for Enteral Applications - Guidance for Industry and Food and Drug Administration Staff
• Immediately in Effect Guidance Document: Classification and Requirements for Laser Illuminated Projectors (LIPs) - Guidance for Industry and Food and Drug Administration Staff
• Technical Performance Assessment of Digital Pathology Whole Slide Imaging Devices - Draft Guidance for Industry and Food and Drug Administration Staff
• Use of an Electronic Informed Consent in Clinical Investigations: Questions and Answers; Draft Guidance for Industry, Clinical Investigators, and Institutional Review Boards
• Reprocessing Medical Devices in Health Care Settings: Validation Methods and Labeling - Guidance for Industry and Food and Drug Administration Staff
• Procedures for Meetings of the Medical Devices Advisory Committee - Draft Guidance for Industry and Food and Drug Administration Staff

You may also want to review some of my previous postings on this topic:

New FDA Medical Device Guidance Documents for the 4th Quarter 2014

New FDA Medical Device Guidance Documents for the 2nd Quarter 2014

New FDA Medical Device Guidance Documents for the 1st Quarter 2014

New Surface Treatment Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Surface Treatments are now available:

• ASTM D870, 2015 Edition, Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
• ASTM D7396, 2014 Edition, Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
• BS EN ISO 12736, 2014 Edition, Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures
• BS EN ISO 14919, 2015 Edition, Thermal spraying. Wires, rods and cords for flame and arc spraying. Classification. Technical supply conditions
• BS EN ISO 14920, 2015 Edition, Thermal spraying. Spraying and fusing of self-fluxing alloys
• ISO 14919, 2nd Edition, Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions
• ISO 14920, 2nd Edition, Thermal spraying - Spraying and fusing of self-fluxing alloys
• SS EN ISO 12736, 2014 Edition, Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures
• SS EN ISO 14919, 2015 Edition, Thermal spraying. Wires, rods and cords for flame and arc spraying. Classification. Technical supply conditions
• SS EN ISO 14920, 2015 Edition, Thermal spraying - Spraying and fusing of self-fluxing alloys

For more standards like these, please see our Document Center List of Standards on Surface Treatments. 

And you may also want to review my previous posts:

New Surface Treatment Standards for the 3rd Quarter 2014

New Surface Treatment Standards for the 2nd Quarter 2014

New Electrical And Magnetic Measurement Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Electrical And Magnetic Measurements are now available:

• BS EN 61340-4-4, 2012 Edition with Amendment 1, Electrostatics. Standard test methods for specific applications. Electrostatic classification of flexible intermediate bulk containers (FIBC)
• BS EN 61340-4-8, 2015 Edition, Electrostatics. Standard test methods for specific applications. Electrostatic discharge shielding. Bags
• BS EN 61557-8, 2015 Edition, Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Insulation monitoring devices for IT systems
• BS EN 61557-9, 2015 Edition, Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Equipment for insulation fault location in IT systems
• BS EN 61557-16, 2015 Edition, Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Equipment for testing the effectiveness of the protective measures of electrical equipment and/or medical electrical equipment
• BS EN 62053-24, 2015 Edition, Electricity metering equipment (a.c.). Particular requirements. Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1)
• BS EN 62110, Corrigendum 1 for 2009 Edition, Electric and magnetic field levels generated by AC power systems. Measurement procedures with regard to public exposure
• IEC 60050-300 Amendment 1 for 1st Edition, Amendment 1, International Electrotechnical Vocabulary - Electrical and electronic measurements and measuring instruments - Part 311: General terms relating to measurements - Part 312: General terms relating to electrical measurements - Part 313: Types of electrical measuring instruments - Part 314: Specific terms according to the type of instrument
• IEC 60404-8-1, Edition 3.0, Magnetic materials - Part 8-1: Specifications for individual materials - Magnetically hard materials
• IEC 62110, Corrigendum 1 for 2009 Edition, Electric and magnetic field levels generated by AC power systems - Measurement procedures with regard to public exposure
• IEC 62792, Edition 1.0, Measurement method for the output of electroshock weapons

For more standards like these, please see our Document Center List of Standards on Electrical And Magnetic Measurements.

New Protective Equipment Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Protective Equipment are now available:

• ANSI Z359.14, 2014 Edition, Safety Requirements for Self-Retracting Devices for Personal Fall Arrest and Rescue Systems
• ASTM F697, Withdrawn, No replacement, Standard Practice for Care and Use of Athletic Mouth Protectors (Withdrawn 2015)
• ASTM F739, 2012 Edition with an Editorial Correction, Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact
• ASTM F955, 2007 Edition with an Editorial Correction, Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances
• ASTM F1002, 2015 Edition, Standard Performance Specification for Protective Clothing and the Materials from Which It Is Made for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards
• ASTM F1296, 2008 Edition Reapproved in 2015, Standard Guide for Evaluating Chemical Protective Clothing
• ASTM F1383, 2012 Edition with an Editorial Correction, Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact
• ASTM F1930, 2015 Edition, Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
• ASTM F1939, 2015 Edition, Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating
• ASTM F2397, 2009 Edition Reapproved in 2015, Standard Specification for Protective Headgear Used in Martial Arts
• ASTM F2436, 2014 Edition, Standard Test Method for Measuring the Performance of Synthetic Rope Rescue Belay Systems Using a Drop Test
• ASTM F2727, 2009 Edition Reapproved in 2014, Standard Guide for Manufacturers for Labeling Headgear Products
• ASTM F2961, 2015 Edition, Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter
• BS EN 374-2, 2014 Edition, Protective gloves against dangerous chemicals and microorganisms. Determination of resistance to penetration
• BS EN 61482-1-2, 2014 Edition, Live working. Protective clothing against the thermal hazards of an electric arc. Test methods. Method 2: Determination of arc protection class of material and clothing by using a constrained and directed arc (box test)
• DIN EN 353-1, 2014 Edition, Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line
• PAS 59, Corrigendum 1 for 2014 Edition, Specification for collective fall arrest soft landing systems

For more Standards on this topic, please see our Document Center List of Standards on Protective Equipment.  It will guide you to specific lists on the subtopics you'll find there.

Have you seen my previous posts?

New Protective Equipment Standards for the 4th Quarter 2014

New Protective Equipment Standards for the 3rd Quarter 2014

New Protective Equipment Standards for the 2nd Quarter 2014

New Protective Equipment Standards for the 1st Quarter 2014

New Ophthalmic Equipment Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Ophthalmic Equipment are now available:

• ANSI Z80.10, 2014 Edition, Ophthalmics - Ophthalmic Instruments -Tonometers
• BS EN ISO 11979-8, 2015 Edition, Ophthalmic implants. Intraocular lenses. Fundamental requirements
• BS EN ISO 14534, 2015 Edition, Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements
• DIN EN ISO 11979-2, 2014 Edition, Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods
• DIN EN ISO 11979-7, 2014 Edition, Ophthalmic implants - Intraocular lenses - Part 6: Shelf-life and transport stability testing
• DIN EN ISO 11979-9, 2014 Edition, Ophthalmic implants - Intraocular lenses - Part 9: Multifocal intraocular lenses
• DIN EN ISO 11979-10, 2014 Edition, Ophthalmic implants - Intraocular lenses - Part 10: Phakic intraocular lenses
• DIN EN ISO 12870, 2014 Edition, Ophthalmic optics - Spectacle frames - Requirements and test methods
• ISO 19045, 1st Edition, Ophthalmic optics - Contact lens care products - Method for evaluating Acanthamoeba encystment by contact lens care products
• SS EN ISO 11979-8, 2015 Edition, Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements (ISO 11979-8:2006)

For more standards like these, please see our Document Center List of Standards on Ophthalmic Equipment.

You may also want to take a look at my previous post:

New Ophthalmic Equipment Standards for the 4th Quarter 2014

New Medical Equipment Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Medical Equipment in General are now available:

• AAMI/IEC 80001-2-5, 2014 Edition, Application of risk management for IT-networks incorporating medical devices - Part 2-5: Application guidance - Guidance on distributed alarm systems
• AAMI/IEC 80001-2-7, 2014 Edition, Application of risk management for IT-networks incorporating medical devices - Application guidance - Part 2-7: Guidance for Healthcare Delivery Organizations (HDOs) on how to self-assess their conformance with IEC 80001-1
• AAMI/ISO 10993-3, 3rd Edition Corrected Reprint, Biological evaluation of medical devices, Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity
• DIN EN 13718-1, 2014 Edition, Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances
• IEC 60601-1-SER, 2015 Edition, Medical electrical equipment - ALL PARTS
• IEC 80001-2-5, Edition 1.0, Application of risk management for IT-networks incorporating medical devices - Part 2-5: Application guidance - Guidance on distributed alarm systems
• ISO 80001-2-7, 1st Edition, Application of risk management for IT-networks incorporating medical devices - Application guidance - Part 2-7: Guidance for Healthcare Delivery Organizations (HDOs) on how to self-assess their conformance with IEC 80001-1

For more standards like these, please see our Document Center List of Standards on Medical Equipment in General.

You may also want to review our previous postings:

New Medical Equipment Standards for the 3rd Quarter 2014

New Medical Equipment Standards for the 4th Quarter 2013

New Quality Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Quality are now available:

• ASTM D6299, 2013 Edition with Editorial Correction, Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
• ASTM D6300, 2014a Edition with Editorial Correction, Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
• ASTM E543, 2015 Edition, Standard Specification for Agencies Performing Nondestructive Testing
• ASTM E1763, Withdrawn, Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods (Withdrawn 2015)
• ASTM E2586, 2014 Edition, Standard Practice for Calculating and Using Basic Statistics
• ASTM E2587, 2014 Edition with Editorial Correction, Standard Practice for Use of Control Charts in Statistical Process Control, 
• BS EN 9100, Corrigendum 1 for 2009 Edition, Quality management systems. Requirements for aviation, space and defense organizations
• BS EN 9103, 2014 Edition, Aerospace series. Quality management systems. Variation management of key characteristics
• BS EN 9110, 2015 Edition, Quality Management Systems. Requirements for Aviation Maintenance Organizations
• BS EN 9133, Corrigendum 1 for 2004 Edition, Aerospace series. Quality management systems. Qualification procedure for aerospace standard parts
• IEC 62740, Edition 1.0, Root cause analysis (RCA)
• IEC 62741, Edition 1.0, Demonstration of dependability requirements - The dependability case
• ISO 17258, 1st Edition, Statistical methods - Six Sigma - Basic criteria underlying benchmarking for Six Sigma in organisations
• ISO/IEC 17026, 1st Edition, Conformity assessment - Example of a certification scheme for tangible products
• ISO/IEC Guide 28, Withdrawn and replaced by ISO/IEC 17026, Conformity assessment -- Guidance on a third-party certification system for products
• ISO/IEC Guide 53, Withdrawn and replaced by ISO/IEC 17026, Conformity assessment -- Guidance on the use of an organization's quality management system in product certification
• PAS 2031, 2015 Edition, Certification of energy efficiency measure (EEM) installation services

For more standards on this topic, please see our Document Center List of Standards on Quality and it's links.

And you'll also want to take a look at my previous posts:

New Quality Standards for the 3rd Quarter 2014

New Quality Standards for the 2nd Quarter 2014

New Quality Standards for the 1st Quarter 2014

New Character Sets and Information Coding Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards for Character Sets and Information Coding are now available:

• ISO/IEC 15444-1 Amendment 8, Amendment 8 for 2nd Edition, Amendment 8: Profiles for an interoperable master format IMF, Information technology - JPEG-2000 image coding system: Core coding system
• ISO/IEC 15459-2, 3rd Edition, Information technology - Automatic identification and data capture techniques - Unique identification - Part 2: Registration procedures
• ISO/IEC 18000-4, 3rd Edition, Information technology - Radio frequency identification for item management - Part 4: Parameters for air interface communications at 2,45 GHz
• ISO/IEC 18004, 3rd Edition, Information technology - Automatic identification and data capture techniques - QR Code bar code symbology specification
• ISO/IEC 18043, Withdrawn and replaced by ISO/IEC-27039, Information technology -- Security techniques -- Selection, deployment and operations of intrusion detection systems
• ISO/IEC 19395, 1st Edition, Information technology - Sustainability for and by information technology - Smart data centre resource monitoring and control
• ISO/IEC 23001-8, Corrigendum 1 for 1st Edition, Information technology - MPEG systems technologies - Part 8: Coding-independent code points
• ISO/IEC 27039, 1st Edition, Information technology - Security techniques - Selection, deployment and operations of intrusion detection systems (IDPS)
• ISO/IEC 27040, 1st Edition, Information technology - Security techniques - Storage security

For more standards like these, please see our Document Center List of Standards on Character Sets and Information Coding.

You may also review my previous posts:

New Character Sets and Information Coding Standards for the 3rd Quarter 2014

New Character Sets and Information Coding Standards for the 2nd Quarter 2014

New Character Sets and Information Coding Standards for the 1st Quarter 2014

New Road Vehicle Systems Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Road Vehicle Systems are now available:

• BS EN 50436-2, 2014 Edition with Amendment A1, Alcohol interlocks. Test methods and performance requirements. Instruments having a mouthpiece and measuring breath alcohol for preventive use
• BS EN 50436-6, 2015 Edition, Alcohol interlocks. Test methods and performance requirements. Data security
• BS EN 60809, 2015 Edition, Lamps for road vehicles. Dimensional, electrical and luminous requirements
• IEC 60809, Edition 3.0, Lamps for road vehicles - Dimensional, electrical and luminous requirements
• ISO 8820-5, 2nd Edition, Road vehicles - Fuse-links - Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures
• ISO 8820-10, 1st Edition, Road vehicles - Fuse-links - Part 10: Fuse-links with tabs Type L (high current miniature)
• ISO 14645, 2nd Edition, Road vehicles - Test procedures for evaluating child restraint system interactions with deploying air bags
• ISO 16844-4, 2nd Edition, Road vehicles - Tachograph systems - Part 4: CAN interface
• ISO 16844-6, 2nd Edition, Road vehicles - Tachograph systems - Part 6: Diagnostics
• ISO 16844-7, 2nd Edition, Road vehicles - Tachograph systems - Part 7: Parameters
• PAS 2012-1, 2015 Edition, Specification for M1 vehicles for the carriage of one or more passengers seated in wheelchairs. Manufacturing requirements
• PAS 2012-2, 2015 Edition, Specification for M1 vehicles for the carriage of one or more passengers seated in wheelchairs. Retail requirements

For more standards like these, please go to our Document Center List of Standards on Road Vehicle Systems.  You can follow additional links to various sub-topics there.

And you may want to take a look at my previous posts:

New Road Vehicle Systems Standards for the 4th Quarter 2014

New Road Vehicle Systems Standards for the 3rd Quarter 2014

New Road Vehicle Systems Standards for the 2nd Quarter 2014

New Road Vehicle Systems Standards for the 1st Quarter 2014

New Welding, Brazing And Soldering Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Welding, Brazing And Soldering are now available:

• BS EN 16602-70-08, 2015 Edition, Space product assurance. Manual soldering of high-reliability electrical connections
• BS EN ISO 10447, 2015 Edition, Resistance welding. Testing of welds. Peel and chisel testing of resistance spot and projection welds
• BS EN ISO 14323, 2015 Edition, Resistance welding. Destructive testing of welds. Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds
• BS EN ISO 14374, 2015 Edition, Resistance welding. Procedure for spot welding of uncoated and coated low carbon steels
• BS EN ISO 23277, 2015 Edition, Non-destructive testing of welds. Penetrant testing. Acceptance levels
• BS EN ISO 23278, 2015 Edition, Non-destructive testing of welds. Magnetic particle testing. Acceptance levels
• ISO 5175 Amendment 1, Amendment 1 for 1st Edition, Equipment used in gas welding, cutting and allied processes - Safety devices for fuel gases and oxygen or compressed air - General specifications, requirements and tests
• ISO 10447, 3rd Edition, Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds
• ISO 14323, 2nd Edition, Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds
• ISO 14373, 2nd Edition, Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels
• ISO 14745, 1st Edition, Welding - Post-weld heat treatment parameters for steels
• ISO 23277, 2nd Edition, Non-destructive testing of welds - Penetrant testing - Acceptance levels
• ISO 23278, 2nd Edition, Non-destructive testing of welds - Magnetic particle testing - Acceptance levels
• SS EN 16602-70-08, 2015 Edition, Space product assurance. Manual soldering of high-reliability electrical connections
• SS EN ISO 10447, 2015 Edition, Resistance welding. Testing of welds. Peel and chisel testing of resistance spot and projection welds
• SS EN ISO 14323, 2015 Edition, Resistance welding. Destructive testing of welds. Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds\
• SS EN ISO 14374, 2015 Edition, Resistance welding. Procedure for spot welding of uncoated and coated low carbon steels
• SS EN ISO 23277, 2015 Edition, Non-destructive testing of welds. Penetrant testing. Acceptance levels
• SS EN ISO 23278, 2015 Edition, Non-destructive testing of welds. Magnetic particle testing. Acceptance levels

For more standards like these, please see our Document Center List of Standards on Welding, Brazing And Soldering.  

You may also want to review these previous posts:

New Welding, Brazing And Soldering Standards for the 4th Quarter 2014

New Welding, Brazing And Soldering Standards for the 3rd Quarter 2014

New Welding, Brazing And Soldering Standards for the 2nd Quarter 2014

New Water Quality Standards for the 1st Quarter 2015 - Part 2

Document Center Inc. is pleased to announce that the following New Standards on Water Quality are now available (continued from Friday 4/10/2015):

• ASTM D1783, 2001 Edition Editorially Corrected, Standard Test Methods for Phenolic Compounds in Water
• ASTM D1890, 2015 Edition, Standard Test Method for Beta Particle Radioactivity of Water
• ASTM D3865, 2009 Edition Reapproved in 2015, Standard Test Method for Plutonium in Water
• ASTM D3972, 2009 Edition Reapproved in 2015, Standard Test Method for Isotopic Uranium in Water by Radiochemistry
• ASTM D3976, 1992 Edition Reapproved in 2015, Standard Practice for Preparation of Sediment Samples for Chemical Analysis
• ASTM D6036, 1996 Edition Reapproved in 2015, Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Use of Maps
• ASTM D6239, 2009 Edition Reapproved in 2015, Standard Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry
• ASTM D7069, 2004 Edition Reapproved in 2015, Standard Guide for Field Quality Assurance in a Groundwater Sampling Event
• ASTM D7535, 2009 Edition Reapproved in 2015, Standard Test Method for Lead-210 in Water
• ISO 17690, 1st Edition, Water quality - Determination of available free cyanide (pH 6) using flow injection analysis (FIA), gas-diffusion and amperometric detection

For more standards like these, please see our Document Center List of Standards on Water Quality.  You'll see links to the various sub-topics you'll want to review.

And review Friday's post to see links to previous blogs for Water Quality Standards:

New Water Quality Standards for the 1st Quarter 2015 - Part 1

New Water Quality Standards for the 1st Quarter 2015 - Part 1

Document Center Inc. is pleased to announce that the following New Standards on Water Quality are now available:

• ASTM C478, 2015 Edition, Standard Specification for Precast Reinforced Concrete Manhole Sections
• ASTM C478M, 2015 Edition, Standard Specification for Precast Reinforced Concrete Manhole Sections (Metric)
• ASTM C966, 1998 Edition Reapproved in 2014, Standard Guide for Installing Asbestos-Cement Nonpressure Pipe
• ASTM D3974, 20009 Edition Reapproved in 2015, Standard Practices for Extraction of Trace Elements from Sediments
• ASTM D5610, 1994 Edition Reapproved in 2014, Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling
• ASTM D5738, Withdrawn, No replacement, Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Diagrams for Single Analyses (Withdrawn 2015)
• ASTM D5754, Withdrawn, No replacement, Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Trilinear Diagrams for Two or More Analyses (Withdrawn 2015)
• ASTM D5880, Withdrawn, No replacement, Standard Guide for Subsurface Flow and Transport Modeling (Withdrawn 2015)
• ASTM D6089, 2015 Edition, Standard Guide for Documenting a Groundwater Sampling Event
• BS EN 12050-1, 2015 Edition, Wastewater lifting plants for buildings and sites. Lifting plants for wastewater containing faecal matter
• BS EN 12050-2, 2015 Edition, Wastewater lifting plants for buildings and sites. Lifting plants for faecal-free wastewater
• BS EN 12050-3, 2015 Edition, Wastewater lifting plants for buildings and sites. Lifting plants for limited applications
• BS EN 12050-4, 2015 Edition, Wastewater lifting plants for buildings and sites. Non-return valves for faecal-free wastewater and wastewater containing faecal matter
• BS EN 12876, 2015 Edition, Chemicals used for treatment of water intended for human consumption. Oxygen
• BS EN 12926, 2015 Edition, Chemicals used for treatment of water intended for human consumption. Sodium peroxodisulfate
• BS EN 12932, 2015 Edition, Chemicals used for treatment of water intended for human consumption. Chemicals for emergency use. Sodium dichloroisocyanurate, dihydrate
• BS EN 12933, 2015 Edition, Chemicals used for treatment of water intended for human consumption. Chemicals for emergency use. Trichloroisocyanuric acid
• BS EN 13176, 2015 Edition, Chemicals used for treatment of water intended for human consumption. Ethanol
• BS EN 13194, 2015 Edition, Chemicals used for treatment of water intended for human consumption. Acetic Acid
• BS EN 14718, 2014 Edition, Influence of organic materials on water intended for human consumption. Determination of the chlorine demand. Test method
• BS EN 15768, 2015 Edition, Influence of materials on water intended for human consumption. GC-MS identification of water leachable organic substances
• SS EN 12050-1, 2015 Edition, Wastewater lifting plants for buildings and sites. Lifting plants for wastewater containing faecal matter
• SS EN 12050-2, 2015 Edition, Wastewater lifting plants for buildings and sites. Lifting plants for faecal-free wastewater
• SS EN 12050-3, 2015 Edition, Wastewater lifting plants for buildings and sites. Lifting plants for limited applications
• SS EN 12050-4, 2015 Edition, Wastewater lifting plants for buildings and sites. Non-return valves for faecal-free wastewater and wastewater containing faecal matter
• SS EN 12876, 2015 Edition, Chemicals used for treatment of water intended for human consumption. Oxygen

• SS EN 12926, 2015 Edition, Chemicals used for treatment of water intended for human consumption. Sodium peroxodisulfate
• SS EN 12932, 2015 Edition, Chemicals used for treatment of water intended for human consumption. Chemicals for emergency use. Sodium dichloroisocyanurate, dihydrate
• SS EN 12933, 2015 Edition, Chemicals used for treatment of water intended for human consumption. Chemicals for emergency use. Trichloroisocyanuric acid
• SS EN 13176, 2015 Edition, Chemicals used for treatment of water intended for human consumption. Ethanol
• SS EN 13194, 2015 Edition, Chemicals used for treatment of water intended for human consumption. Acetic Acid
• SS EN 14718, 2014 Edition, Influence of organic materials on water intended for human consumption. Determination of the chlorine demand. Test method
• SS EN 15768, 2015 Edition, Influence of materials on water intended for human consumption. GC-MS identification of water leachable organic substances

For more standards like these, please see our Document Center List of Standards on Water Quality.  There are links on this page to the various sub-topics.

You may also like to take a look at some of our previous posts:

New Water Quality Standards for the 3rd Quarter 2014

New Water Quality Standards for the 2nd Quarter 2014

New Water Quality Standards for the 1st Quarter 2014

New Dentistry Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Dentistry are now available:

• BS EN ISO 9687, 2015 Edition, Dentistry. Graphical symbols for dental equipment
• ISO 7494-2, 2nd Edition, Dentistry - Dental units - Part 2: Air, water, suction and wastewater systems
• ISO 9687, 2nd Edition, Dentistry - Graphical symbols for dental equipment
• ISO 10637, Partially Replaced by ISO 7494-2, Dental equipment - High- and medium-volume suction systems
• ISO 11144, Replaced by ISO 7494-2, Dental equipment - Connections for supply and waste lines
• ISO 11405, 3rd Edition, Dentistry - Testing of adhesion to tooth structure
• SS EN ISO 9687, 2015 Edition, Dentistry. Graphical symbols for dental equipment

For more standards like these, please see our Document Center List of Standards on Dentistry.  Additional links on this page provide you with lists of standards on specific sub-topics.

And you may also like to take a look at my previous posts:

New Dentistry Standards for the 4th Quarter 2014

New Dentistry Standards for the 3rd Quarter 2014

New Dentistry Standards for the 2nd Quarter 2014

New Dentistry Standards for the 4th Quarter 2013

New Dentistry Standards for the 3rd Quarter 2013

New Dentistry Standards for the 2nd Quarter 2013

New Dentistry Standards for the 1st Quarter 2013

New Road Vehicle System Standards for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Road Vehicle Systems are now available:

• BS EN 50436-2, 2014 Edition with Amendment A1, Alcohol interlocks. Test methods and performance requirements. Instruments having a mouthpiece and measuring breath alcohol for preventive use
• BS EN 50436-6, 2015 Edition, Alcohol interlocks. Test methods and performance requirements. Data security
• BS EN 60809, 2015 Edition, Lamps for road vehicles. Dimensional, electrical and luminous requirements
• IEC 60809, Edition 3.0, Lamps for road vehicles - Dimensional, electrical and luminous requirements
• ISO 8820-5, 2nd Edition, Road vehicles - Fuse-links - Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures
• ISO 8820-10, 1st Edition, Road vehicles - Fuse-links - Part 10: Fuse-links with tabs Type L (high current miniature)
• ISO 14645, 2nd Edition, Road vehicles - Test procedures for evaluating child restraint system interactions with deploying air bags
• ISO 16844-4, 2nd Edition, Road vehicles - Tachograph systems - Part 4: CAN interface
• ISO 16844-6, 2nd Edition, Road vehicles - Tachograph systems - Part 6: Diagnostics
• ISO 16844-7, 2nd Edition, Road vehicles - Tachograph systems - Part 7: Parameters
• PAS 2012-1, 2015 Edition, Specification for M1 vehicles for the carriage of one or more passengers seated in wheelchairs. Manufacturing requirements
• PAS 2012-2, 2015 Edition, Specification for M1 vehicles for the carriage of one or more passengers seated in wheelchairs. Retail requirements

For more standards like these, please see our Document Center List of Standards on Road Vehicle Systems.  This provides you with links to the various sub-sets available.

You may also like to review my previous posts:

New Road Vehicle System Standards for the 4th Quarter 2014

New Road Vehicle System Standards for the 3rd Quarter 2014

New Road Vehicle System Standards for the 2nd Quarter 2014

New Road Vehicle System Standards for the 1st Quarter 2014

New Road Vehicle System Standards for the 3rd Quarter 2013

New Ignitability and Burning Behaviour of Materials and Products for the 1st Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Ignitability and Burning Behaviour of Materials and Products are now available:

• ASTM C93, 2015 Edition, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
• ASTM D635, 2014 Edition, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
• ASTM E2536, 2015 Edition, Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
• ASTM F2702, 2015 Edition, Standard Test Method for Radiant Heat Performance of Flame Resistant Clothing Materials with Burn Injury Prediction
• BS EN 14533, 2015 Edition, Textiles and textile products. Burning behaviour of bedding items. Classification scheme
• BS EN 61482-1-2, 2014 Edition, Live working. Protective clothing against the thermal hazards of an electric arc. Test methods. Method 2: Determination of arc protection class of material and clothing by using a constrained and directed arc (box test)
• IEC 60695-1-12, Edition 1.0, Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering
• ISO 17554, 2nd Edition, Reaction to fire tests - Mass loss measurement
• SS EN 14533, 2015 Edition, Textiles and textile products. Burning behaviour of bedding items. Classification scheme

For more standards like these, please see our Document Center List of Standards on Ignitability and Burning Behaviour of Materials and Products.

You may also want to take a look at my previous post:

New Ignitability and Burning Behaviour of Materials and Products for the 2nd Quarter 2013