Document Center, Inc. is pleased to announce that the following Standards on Road Construction Materials are now available;
- ASTM C1272, 2016 Edition, Standard Specification for Heavy Vehicular Paving Brick
- ASTM D113, Withdrawn Without Replacement, Standard Test Method for Ductility of Bituminous Materials (Withdrawn 2016)
- ASTM D946, 2015 Edition, Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction
- ASTM D3279, 2012 Edition with Editorial Correction, Standard Test Method for n-Heptane Insolubles
- ASTM D3628, 2015 Edition, Standard Practice for Selection and Use of Emulsified Asphalts
- ASTM D6626, 2015 Edition, Standard Specification for Performance Graded Trinidad Lake Modified Asphalt Binder
- ASTM D6628, 2003 Edition Reapproved in 2015, Standard Specification for Color of Pavement Marking Materials
- ASTM D6690, 2015 Edition, Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
- ASTM D7115, 2010 Edition Reapproved in 2015, Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
- ASTM E274, 2015 Edition, Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
- ASTM E445, 2015 Edition, Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires
- ASTM E1696, 2015 Edition (Reinstated), Standard Test Method for Field Measurement of Raised Retroreflective Pavement Markers Using a Portable Retroreflectometer
- ASTM E2302, 2003A Edition Reapproved in 2016, Standard Test Method for Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials Using a Portable Reflectometer
- BS EN 14227-10, Replaced by BS EN 14227-15, Hydraulically bound mixtures. Specifications. Soil treated by cement
- BS EN 14227-12, Replaced by BS EN 14227-15, Hydraulically bound mixtures. Specifications. . Soil treated by slag
- BS EN 14227-13, Replaced by BS EN 14227-15, Hydraulically bound mixtures. Specifications. Soil treated by hydraulic road binder
- BS EN 14227-14, Replaced by BS EN 14227-15, Hydraulically bound mixtures. Specifications. Soil treated by fly ash
- BS EN 14227-15, 20115 Edition, Hydraulically bound mixtures. Specifications. Hydraulically stabilized soils
- DIN EN 13924, Replaced by DIN EN 13924-1, Bitumen and bituminous binders - Specifications for hard paving grade bitumens
- DIN EN 14227-10, Replaced by DIN EN 14227-15, Hydraulically bound mixtures - Specifications - Part 10: Soil treated by cement
- DIN EN 14227-11, Replaced by DIN EN 14227-15, Hydraulically bound mixtures - Specifications - Part 11: Soil treated by lime
- DIN EN 14227-12, Replaced by DIN EN 14227-15, Hydraulically bound mixtures - Specifications - Part 12: Soil treated by slag
- DIN EN 14227-13, Replaced by DIN EN 14227-15, Hydraulically bound mixtures - Specifications - Part 13: Soil treated by hydraulic road binder
- DIN EN 14227-14, Replaced by DIN EN 14227-15, Hydraulically bound mixtures - Specifications - Part 14: Soil treated by fly ash
- DIN EN 14227-15, 2016 Edition, Hydraulically bound mixtures - Specifications - Part 15: Hydraulically stabilized soils
Document Center, Inc. is pleased to announce that the following Standards on Binders and Sealing Materials are now available;
- ASTM C908, 2015 Edition, Standard Test Method for Yield Strength of Preformed Tape Sealants
- ASTM C910, 2016 Edition, Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
- ASTM C1193, 2016 Edition, Standard Guide for Use of Joint Sealants
- ASTM D113, Withdrawn without Replacement, Standard Test Method for Ductility of Bituminous Materials (Withdrawn 2016)
- ASTM D1079, 2016 Edition, Standard Terminology Relating to Roofing and Waterproofing
- ASTM D3161, 2016 Edition, Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method)
- ASTM D3279, 2012 Edition with Editorial Correction, Standard Test Method for n-Heptane Insolubles
- ASTM D3628, 2015 Edition, Standard Practice for Selection and Use of Emulsified Asphalts
- ASTM D4434, 2015 Edition, Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
- ASTM D7405, 2015 Edition, Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D7703, 2015 Edition, Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Lance Method
- BS EN 14196, 2016 Edition, Geosynthetics. Test methods for measuring mass per unit area of clay geosynthetic barriers
- BS EN 16659, 2015 Edition, Bitumen and Bituminous Binders. Multiple Stress Creep and Recovery Test (MSCRT)
- BS ISO 19863, 2016 Edition, Buildings and civil engineering works - Sealants - Determination of tear resistance
- DIN EN ISO 9046, 2016 Edition, Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature
- ISO 19863, 1st Edition, Buildings and civil engineering works - Sealants - Determination of tear resistance
Document Center, Inc. is pleased to announce that the following Standards on Liquid Fuels are now available;
- ASTM D473, 2007 Reapproved in 2012 Edition with Editorial Correction, Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
- ASTM D2700, 2016 Edition, Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
- ASTM D3343, 2016 Edition, Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
- ASTM D4806, 2016A Edition, Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
- ASTM D4814, 2016B Edition, Standard Specification for Automotive Spark-Ignition Engine Fuel
- ASTM D5500, 2016 Edition, Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
- ASTM D5773, 2015A Edition, Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
- ASTM D5972, 2016 Edition, Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
- ASTM D6751, 2015C Edition with Editorial Correction, Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
- ASTM D7096, 2016 Edition, Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
- ASTM D7153, 2015 Edition with Editorial Correction, Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
- ASTM D7223, 2016 Edition, Standard Specification for Aviation Certification Turbine Fuel
- ASTM D7347, 2015 Edition, Standard Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography
- ASTM D7463, 2016 Edition, Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
- ASTM D7467, 2015C Edition with Editorial Correction, Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
- ASTM D7621, 2016 Edition, Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
- ASTM D7754, 2016 Edition, Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography
- ASTM D7795, 2015 Edition, Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration
- BS EN ISO 12156-1, 2016 Edition, Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Test method
- ISO-12156-1, 3rd Edition, Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method
- ISO 17306, 1st Edition, Petroleum products - Biodiesel - Determination of free and total glycerin and mono-, di- and tracylglycerols by gas chromatography
- ISO 17307, 1st Edition, Petroleum products - Biodiesel - Determination of total esters content by gas chromatography
- PD CEN 16884, 2016 Edition, Automotive fuels. Diesel fuel. Cold operability testing and fuel performance correlation
- PD ISO 17306, 2016 Edition, Petroleum products. Biodiesel. Determination of free and total glycerin and mono-, di- and tracylglycerols by gas chromatography
- PD ISO 17307, 2016 Edition, Petroleum products. Biodiesel. Determination of total esters content by gas chromatography
Document Center, Inc. is pleased to announce that the following Standards on Coaxial Cables and Waveguides are now available;
- BS EN 50290-2-21, 2002 Edition with Amendment 1, Communication cables. Common design rules and construction. PVC insulation compounds
- BS EN 60966-2-7, 2016 Edition, Radio frequency and coaxial cable assemblies. Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 MHz to 3 000 MHz, IEC 61169-47 connectors
- BS EN 61196-2, Withdrawn and Replaced by BS EN 61196-10, Radio-frequency cables. Specifications. Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation
- BS EN 61196-10, 2016 Edition, Coaxial communication cables. Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric
- BS EN 62153-4-7, 2016 Edition, Metallic communication cable test methods. Electromagnetic compatibility (EMC). Test method for measuring of transfer impedance ZT and screening attenuation as or coupling attenuation ac of connectors and assemblies up to and above 3 GHz. Triaxial tube in tube method
- BS IEC 61196-4-1, 2016 Edition, Coaxial communication cables. Blank detail specification for radiating cables
- IEC 61196-4-1, 1st Edition, Coaxial communication cables - Part 4-1: Blank detail specification for radiating cables
- IEC 61196-1-110, 1st Edition, Coaxial communication cables - Part 1-110: electrical test methods - Test for continuity
- IEC 61196-1-209, 1st Edition, Coaxial communication cables - Part 1-209: Environmental test methods - Thermal cycling
- IEC 61196-1-215, 1st Edition, Coaxial communication cables - Part 1-215: Environmental test methods - High temperature cable ageing
- IEC 61196-10, Corrigendum 1 for the 1st edition, Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric
- IEC-61196-11, 1st Edition, Coaxial communication cables - Part 11: Sectional specification for semi-rigid cables with polyethylene (PE) dielectric
- IEC 61196-11-1, 1st Edition, Coaxial communication cables - Part 11-1: Blank detail specification for semi-rigid cables with polyethylene (PE) dielectric
- IEC 62153-4-15, 1st Edition, Metallic communication cable test methods - Part 4-15: Electromagnetic compatibility (EMC) - Test method for measuring transfer impedance and screening attenuation - or coupling attenuation with triaxial cell
Document Center, Inc. is pleased to announce that the following Standards on Dental Materials are now available;
- BS EN ISO 9693-2, 2016 Edition, Dentistry. Compatibility testing. Ceramic-ceramic systems
- BS EN ISO 13017, 2012 Edition with Amendment 1, Dentistry. Magnetic attachments
- BS EN ISO 15912, 2016 Edition, Dentistry. Refractory investment and die material
- BS EN ISO 22674, 2016 Edition, Dentistry. Metallic materials for fixed and removable restorations and appliances
- DIN EN ISO 6874, 2015 Edition, Dentistry - Polymer-based pit and fissure sealants
- ISO 9693-2, 1st Edition, Dentistry - Compatibility testing - Part 2: Ceramic-ceramic systems
- ISO 15912, 2nd Edition, Dentistry - Refractory investment and die material
- ISO 22674, 2nd Edition, Dentistry - Metallic materials for fixed and removable restorations and appliances
Document Center, Inc. is pleased to announce that the following Standards on Implants for Surgery, Prosthetics, and Orthotics are now available;
- ANSI/AAMI/ISO 5840-1, 2015 Edition, Cardiovascular implants-Cardiac valve prostheses - Part 1: General requirements
- ANSI/AAMI/ISO 5840-2, 2016 Edition, Cardiovascular implants-Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes
- ASTM F629, 2015 Edition, Standard Practice for Radiography of Cast Metallic Surgical Implants
- ASTM F703, Withdrawn without replacement, Standard Specification for Implantable Breast Prostheses
- ASTM F1814, 2015 Edition, Standard Guide for Evaluating Modular Hip and Knee Joint Components
- ASTM F2386, 2015 Edition, Standard Practice for Determining Femoral Head Penetration into Acetabular Components of Total Hip Replacement Using Clinical Radiographs
- BS EN ISO 13959, Corrigendum 1 for the 2015 Edition, Water for haemodialysis and related therapies
- DIN EN ISO 5840, Replaced by DIN EN ISO 5840-2, Cardiovascular implants - Cardiac valve prostheses
- ISO 7206-4-AM1, Amendment 1 for the 3rd Edition, Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 4: Determination of Endurance Properties and Performance of Stemmed Femoral Components
Document Center, Inc. is pleased to announce that the following Standards on Leather and Furs are now available;
- BS EN ISO 2417, 2016 Edition, Leather. Physical and mechanical tests. Determination of the static absorption of water
- BS EN ISO 2589, 2016 Edition, Leather. Physical and mechanical tests. Determination of thickness
- BS EN ISO 3377-2, 2016 Edition, Leather. Physical and mechanical tests. Determination of tear load. Double edge tear
- BS EN ISO 17229, 2016 Edition, Leather. Physical and mechanical tests. Determination of water vapour absorption
- BS EN ISO 17236, 2016 Edition, Leather. Physical and mechanical tests. Determination of extension set
- ISO 2417, 3rd Edition, Leather - Physical and mechanical tests - Determination of the static absorption of water
- ISO 2589, 3rd Edition, Leather - Physical and mechanical tests - Determination of thickness
- ISO 3377-2, 2nd Edition, Leather - Physical and mechanical tests - Determination of tear load - Part 2: Double edge tear
- ISO 17229, 2nd Edition, Leather - Physical and mechanical tests - Determination of water vapour absorption
- ISO 17236, 2nd Edition, Leather - Physical and mechanical tests - Determination of extension set
- ISO 19070, 1st Edition, Leather - Chemical determination of N-methyl-2-pyrrolidone (NMP) in leather
- ISO 19071, 1st Edition, Leather - Chemical tests - Determination of chromium (VI) and the reductive potential for chromium tanning agents
Document Center, Inc. is pleased to announce that the following Standards on Paints and Varnishes are now available;
- ASTM D2205, 2015 Edition, Standard Guide for Selection of Tests for Traffic Paints
- ASTM D2247, 2015 Edition, Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
- ASTM D5067, 2016 Edition, Standard Specification for Artists' Watercolor Paints
- ASTM D5098, 2016 Edition, Standard Specification for Artists' Acrylic Dispersion Paints
- ASTM D5108, Withdrawn without Replacement, Standard Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water (Withdrawn 2016)
- ASTM D5724, 2016 Edition, Standard Specification for Gouache Paints
- ASTM E1645, 2016 Edition, Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
- BS EN ISO 2811-1, 2016 Edition, Paints and varnishes. Determination of density. Pycnometer method
- BS EN ISO 4628-1, 2016 Edition, Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. General introduction and designation system
- BS EN ISO 4628-2, 2016 Edition, Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of blistering
- BS EN ISO 4628-3, 2016 Edition, Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of rusting
- BS EN ISO 4628-4, 2016 Edition, Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of cracking
- BS EN ISO 4628-5, 2016 Edition, Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of flaking
- BS EN ISO 4628-7, 2016 Edition, Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of chalking by velvet method
- BS EN ISO 4628-10, 2016 Edition, Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of filiform corrosion
- ISO 2811-1, 3rd edition, Paints and varnishes - Determination of density - Part 1: Pycnometer method
- ISO 4624, 3rd Edition, Paints and varnishes - Pull-off test for adhesion
- ISO 4628-1, 4th Edition, Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system
- ISO 4628-2, 3rd Edition, Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
- ISO 4628-3, 3rd Edition, Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
- ISO 4628-4, 3rd Edition, Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
- ISO 4628-5, 3rd Edition, Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking
- ISO 4628-7, 2nd Edition, Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method
- ISO 4628-10, 2nd Edition, Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion
- ISO 7784-1, 2nd Edition, Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen
- ISO 7784-2, 2nd Edition, Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen
- ISO 7784-3, 2nd Edition, Paints and varnishes - Determination of resistance to abrasion - Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen
Document Center, Inc. is pleased to announce that the following Standards on Furniture are now available;
- ASTM F404, 2016 Edition, Standard Consumer Safety Specification for High Chairs
- BS EN 597-1, 2015 Edition, Furniture. Assessment of the ignitability of mattresses and upholstered bed bases. Ignition source smouldering cigarette
- BS EN 597-2, 2015 Edition, Furniture. Assessment of the ignitability of mattresses and upholstered bed bases. Ignition source: match flame equivalent
- BS EN 1729-1, 2015 Edition, Furniture. Chairs and tables for educational institutions. Functional dimensions
- BS EN 1729-2, 2012 with Amendment 1, Furniture. Chairs and tables for educational institutions. Safety requirements and test methods
- BS EN 12520, 2015 Edition, Furniture. Strength, durability and safety. Requirements for domestic seating
- BS EN 12521, 2015 Edition, Furniture. Strength, durability and safety. Requirements for domestic tables
- BS EN 14749, 2016 Edition, Furniture. Domestic and kitchen storage units and kitchen-worktops. Safety requirements and test methods
- DIN EN 1729-1, 2016 Edition, Furniture - Chairs and tables for educational institutions - Part 1: Functional dimensions
- PD CEN 16611, 2016 Edition, Furniture. Assessment of the surface resistance to microscratching
Document Center, Inc. is pleased to announce that the following Standards on Optical Equipment are now available;
- BS ISO 14490-3, 2016 Edition, Optics and photonics. Test methods for telescopic systems. Test methods for telescopic sights
- DIN ISO 9335, 2015 Edition, Optics and photonics - Optical transfer function - Principles and procedures of measurement
- DIN ISO 10109-1, Withdrawn and Replaced by DIN ISO 10109, Optics and photonics - Environmental requirements - Part 1: General overview, terms and definitions, climatic zones and their parameters
- DIN ISO 10109-6, Withdrawn and Replaced by DIN ISO 10109, Optics and photonics - Environmental requirements - Part 6: Test requirements for medical optical instruments
- DIN ISO 10109-7, Withdrawn and Replaced by DIN ISO 10109, Optics and optical instruments - Environmental requirements - Part 7: Test requirements for optical measuring systems
- DIN ISO 10109-8, Withdrawn and Replaced by DIN ISO 10109, Optics and photonics - Environmental requirements - Part 8: Test requirements for extreme conditions of use
- DIN ISO 10109-11, Withdrawn and Replaced by DIN ISO 10109, Optics and optical instruments - Environmental requirements - Part 11: Optical instruments for outdoor conditions of use
- DIN ISO 10109-12, Withdrawn and Replaced by DIN ISO 10109, Optics and optical instruments - Environmental requirements - Part 12: Conditions of transport for optical instruments
- DIN ISO 14490-6, 2016 Edition, Optics and photonics - Test methods for telescopic systems - Part 6: Test methods for veiling glare index
Document center, Inc. is pleased to announce that the following Standards on IT Applications in Industry are now available;
- ASTM C1558, 2016 Edition, Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
- BS EN 61804-4, 2016 Edition, Function blocks (FB) for process control and Electronic Device Description Language (EDDL). EDD interpretation
- BS EN 61987-21, 2016 Edition, Industrial-process measurement and control. Data structures and elements in process equipment catalogues. List of Properties (LOP) of automated valves for electronic data exchange. Generic structures
- BS EN 61987-22, 2016 Edition, Industrial-process measurement and control. Data structures and elements in process equipment catalogues. Lists of Properties (LOPs) of valve body assemblies for electronic data exchange
- BS EN 61987-23, 2016 Edition, Industrial-process measurement and control. Data structures and elements in process equipment catalogues. Lists of Properties (LOPs) of actuators for electronic data exchange
- BS EN 61987-24-1, 2016 Edition, Industrial-process measurement and control. Data structures and elements in process equipment catalogues. Lists of Properties (LOPs) of positioners and I/P converters for electronic data exchange
- BS ISO/ASTM 52915, 2016 Edition, Specification for Additive Manufacturing File Format (AMF) Version 1.2
- ISO 13399-204, 1st Edition, Cutting tool data representation and exchange - Part 204: Creation and exchange of 3D models - Inserts for reaming
- ISO 13399-303, 1st Edition, Cutting tool data representation and exchange - Part 303: Creation and exchange of 3D models - Solid end mills
- ISO 13399-304, 1st Edition, Cutting tool data representation and exchange - Part 304: Creation and exchange of 3D models - Solid milling cutters with arbor hole
- ISO 13399-307, 1st Edition, Cutting tool data representation and exchange - Part 307: Creation and exchange of 3D models - End mills for indexable inserts
- ISO 13399-308, 1st Edition, Cutting tool data representation and exchange - Part 308: Creation and exchange of 3D models - Milling cutters with arbor hole for indexable inserts
- ISO 13399-309, 1st Edition, Cutting tool data representation and exchange - Part 309: Creation and exchange of 3D models - Tool holders for indexable inserts
- ISO 13399-311, 1st Edition, Cutting tool data representation and exchange - Part 311: Creation and exchange of 3D models - Solid reamers
- ISO 13399-312, 1st Edition, Cutting tool data representation and exchange - Part 312: Creation and exchange of 3D models - Reamers for indexable inserts
- ISO 13399-401, 1st Edition, Cutting tool data representation and exchange - Part 401: Creation and exchange of 3D models - Converting, extending and reducing adaptive items
- ISO 13399-405, 1st Edition, Cutting tool data representation and exchange - Part 405: Creation and exchange of 3D models - Collets
- ISO 52915, 2nd Edition, Specification for Additive Manufacturing File Format (AMF) Version 1.2
- PD CLC 61804-4, Withdrawn and Replaced by BS EN 61804-4, Function blocks (FB) for process control. EDD interoperability guideline
- PD ISO 13399-204, 2016 Edition, Cutting tool data representation and exchange. Creation and exchange of 3D models. Inserts for reaming
- PD ISO 13399-303, 2016 Edition, Cutting tool data representation and exchange. Creation and exchange of 3D models. Solid end mills
- PD ISO 13399-304, 2016 Edition, Cutting tool data representation and exchange. Creation and exchange of 3D models. Solid milling cutters with arbor hole
- PD ISO 13399-307, 2016 Edition, Cutting tool data representation and exchange. Creation and exchange of 3D models. End mills for indexable inserts
- PD ISO 13399-308, 2016 Edition, Cutting tool data representation and exchange. Creation and exchange of 3D models. Milling cutters with arbor hole for indexable inserts.
- PD ISO 13399-309, 2016 Edition, Cutting tool data representation and exchange. Creation and exchange of 3D models. Tool holders for indexable inserts
- PD ISO 13399-311, 2016 Edition, Cutting tool data representation and exchange. Creation and exchange of 3D models. Solid reamers
- PD ISO 13399-312, 2016 Edition, Cutting tool data representation and exchange. Creation and exchange of 3D models. Reamers for indexable inserts
- PD ISO 13399-401, 2016 Edition, Cutting tool data representation and exchange. Creation and exchange of 3D models. Converting, extending and reducing adaptive items
- PD ISO 13399-405, 2016 Edition, Cutting tool data representation and exchange. Creation and exchange of 3D models. Collets
Document Center, Inc. is pleased to announce that the following Standards on Animal and Vegetable Fats and Oils are now available;
- BS EN ISO 29841, 2014 Edition with Amendment 1, Vegetable fats and oils. Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins)
- BS EN ISO 6885, 2016 Edition, Animal and vegetable fats and oils. Determination of anisidine value
- BS EN ISO 6886, 2016 Edition, Animal and vegetable fats and oils. Determination of oxidative stability (accelerated oxidation test)
- BS ISO 27608, 2010 Edition with Amendment 1, Animal and vegetable fats and oils. Determination of Lovibond® colour. Automatic method
- ISO 27608-AM1, Amendment 1 for the 1st Edition, Amendment 1 - Animal and vegetable fats and oils - Determination of Lovibond® colour - Automatic method
- ISO 29841-AM1, Amendment 1 for the 1st Edition, Vegetable fats and oils - Determination of the degradation products of chlorophylls a and a (pheophytins a, a and pyropheophytins)
- ISO 6885, 4th Edition, Animal and vegetable fats and oils - Determination of anisidine value
- ISO 6886, 3rd Edition, Animal and vegetable fats and oils - Determination of oxidative stability (accelerated oxidation test)
- ISO 9936, 3rd Edition, Animal and vegetable fats and oils - Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography
Document Center, Inc. is pleased to announce that the following standards on Bolts, Screws, and Studs for Aerospace Construction are now available;
- BS 2A-266-2A-271; 2016 Edition, Bolt, 100° Countersunk head, Hi-Torque speed drive recess, UNJF thread , split pin hole option, titanium alloy, various finishes, Classification: 80 Tf/in2 (1 100 MPa) at TA/+315 °C
- BS 4A-114, Corrigendum 1 for 1999 Edition, Specification for corrosion-resisting steel, mushroom-headed, slotted-drive, bolts, strength class 880 MPa
- BS A-266-A267, Replaced by BS 2A 266 2A 271, Specification for 100° countersunk head titanium alloy bolts 160 000 lbf/in2 (1100 MPa) with Hi-torque speed drive recesses
- BS A-312, Replaced by BS ISO 12260, Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
- BS A-313, Replaced by BS ISO 12261, Aerospace. Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
- BS A-363, Replaced by BS ISO 9154, Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification
- BS EN 4072, 2016 Edition, Aerospace series. Screws, 100$0D countersunk normal head, offset cruciform recess, close tolerance shank, short thread in titanium alloy, aluminium IVD coated. Classification: 1 100 MPa (at ambient temperature) / 425 $0DC
- BS EN 4128, 2016 Edition, Aerospace series. Bolts, normal hexagonal head, coarse tolerance shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification: 1 250 MPa (at ambient temperature) / 425 °C
- BS EN 4162, 2016 Edition, Aerospace series. Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 °C
- BS EN 4163, 2016 Edition, Aerospace series. Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 °C
- BS ISO 9154, 2016 Edition, Aerospace. Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification
- BS ISO 12260, 2016 Edition, Aerospace. Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions
- BS ISO 12261, 2016 Edition, Aerospace. Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions
- ISO 9154, 2nd Edition, Aerospace - Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa - Procurement specification
- ISO 12260, 2nd Edition, Aerospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa - Dimensions
- ISO 12261, 2nd Edition, Aerospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa - Dimensions
Document Center, Inc. is pleased to announce that the following Standards on Industrial Trucks are now available;
- BS EN ISO 3691-2, 2016 Edition, Industrial trucks. Safety requirements and verification. Self-propelled variable-reach trucks
- BS EN ISO 3691-6, Corrigendum 2 for 2013 Edition, Industrial trucks. Safety requirements and verification. Burden and personnel carriers
- BS ISO 10896-2, 2016 Edition, Rough-terrain trucks. Safety requirements and verification. Slewing trucks
- BS ISO 10896-6, 2015 Edition, Rough-terrain trucks. Safety requirements and verification. Tilting operator’s cabs
- ISO 10896-2, 1st Edition, Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing trucks
- ISO 22915-1, 2nd Edition, Industrial trucks - Verification of stability - Part 1: General
- ISO 3691-2, 1st Edition, Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-reach trucks
Document Center, Inc. Is pleased to announce that the following Standards on Toys and Other Entertainment Equipment are now available;
- ISO 8124-8, 2nd Edition, Safety of toys - Part 8: Age determination guidelines
- PD CEN 16918, 2015 Edition, Safety of toys. Children´s mouthing behaviour in contact with toys
- PD CEN ISO 8124-8, 2016 Edition, Safety of toys. Age determination guidelines
- PD ISO 8124-8, Replaced by PD CEN ISO 8124-8, Safety of toys. Age determination guidelines
- ASTM F1193, 2016 Edition, Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
- ASTM F2137, 2015A Edition, Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices
Document Center, Inc. is pleased to announce that the following Standards on Fire-Resistance of Building Materials and Elements are now available;
- ASTM D6668, Reapproved in 2016, Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1
- ASTM D6841, 2016 Edition, Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber
- ASTM E84, 2015B Edition, Standard Test Method for Surface Burning Characteristics of Building Materials
- ASTM E136, 2016 Edition, Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C
- ASTM E162, 2015B Edition, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
- ASTM E1623, 2016 Edition, Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
- ASTM E2257, 2016 Edition, Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
- ASTM E2652, 2016 Edition, Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C
- BS 8202-2, Replaced by BS EN 16623, Coatings for fire protection of building elements. Code of practice for the use of intumescent coating systems to metallic substrates for providing fire resistance
- BS EN 50577, 2015 Edition, Electric cables. Fire resistance test for unprotected electric cables (P classification)
- BS EN 81-73, 2016 Edition, Safety rules for the construction and installation of lifts. Particular applications for passenger and goods passenger lifts. Behaviour of lifts in the event of fire
- ISO 9705-1, 1st Edition, Reaction to fire tests - Room corner test for wall and ceiling lining products - Part 1: Test method for a small room configuration
Document Center, Inc. is pleased to announce that the following standards on Electrical Engineering are now available:
- BIP 2082, 2015 Edition, Electrician’s Guide to the Building Regulations
- BS EN ISO 13849-1, 2015 Edition, Safety of machinery. Safety-related parts of control systems. General principles for design
- IEC 60050-192-AM1, Amendment 1 for Edition 1.0, Amendment 1 - International Electrotechnical Vocabulary - Part 192: Dependability
- IEC 60050-702-AM1, Amendment 1 for Edition 1.0, Amendment 1 - International Electrotechnical Vocabulary - Chapter 702: Oscillations, signals and related devices
- IEC 60695-1-20, Edition 1.0, Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance
- IEC 60695-11-11, Edition 2.0, Fire hazard testing - Part 11-11: Test flames - Determination of the characteristic heat flux for ignition from a non-contacting flame source
- IEC 60695-11-20, Corrigendum 1 for Edition 2.0, Fire hazard testing - Part 11-20: Test flames - 500 W flame test method
- IEC 60950-22, Edition 2.0, Information technology equipment - Safety - Part 22: Equipment to be installed outdoors
- IEC 61140, Edition 4.0, Protection against electric shock - Common aspects for installations and equipment
- IEC 61508-SER, Edition 2.0, IEC 61508 - Electronic Functional Safety Package
Document Center, Inc. is pleased to announce that the following standards on Shipbuilding and Marine Structures are now available;
- ASTM F2594, Withdrawn with no replacement, Standard Guide for Unmanned Undersea Vehicle (UUV) Communications (Withdrawn 2016)
- ASTM F2595, Withdrawn with no replacement, Standard Guide for Unmanned Undersea Vehicle (UUV) Sensor Data Formats (Withdrawn 2016)
- BS EN ISO 10239, 2014 Edition, Small craft. Liquefied petroleum gas (LPG) systems
- BS EN ISO 11592, Withdrawn and Replaced by BS EN ISO 11592-1, Small craft less than 8 m length of hull. Determination of maximum propulsion power rating
- BS EN ISO 11592-1, 2016 Edition, Small craft. Determination of maximum propulsion power rating using manoeuvring speed. Craft with a length of hull less than 8 m
- BS EN ISO 21487, 2012 Edition with Amendment 2, Small craft. Permanently installed petrol and diesel fuel tanks
- DIN EN ISO 12217-2, 2016 Edition, Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (English language edition)
- DIN EN ISO 12217-3, 2016 Edition, Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (English Language edition)
- ISO 11592-1, 1st Edition, Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 1: Craft with a length of hull less than 8 m
- ISO 13363, 2nd Edition, Rubber and plastics hoses for marine-engine wet-exhaust systems - Specification
- PD 54823, 2016 Edition, Guidance for the design, commissioning and maintenance of LPG systems in small craft
- PD 5482-3, Replaced by PD 54823, Code of practice for domestic butane and propane gas-burning installations. Installations in boats, yachts and other vessels
Document Center, Inc. is pleased to announce that the following standards on Solar Energy Engineering are now available;
- ASTM E973, 2015 Edition, Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
- BS EN 50583-1, 2015 Edition, Photovoltaics in buildings. Part 1: BIPV modules
- BS EN 50583-2, 2016 Edition, BS EN 50583-2 Photovoltaics in buildings. Part 2: BIPV systems
- BS EN 61829, 2016 Edition, Photovoltaic (PV) array. On-site measurement of current-voltage characteristics
- DD IEC 62257-3, Withdrawn and replaced by PD IEC 62257-3, 2015 Edition, Recommendations for small renewable energy and hybrid systems for rural electrification. Project development and management
- DD IEC 62257-4, Withdrawn and replaced by PD IEC 62257-4, 2015 Edition, Recommendations for small renewable energy and hybrid systems for rural electrification. System selection and design
- DD IEC 62257-5, Withdrawn and replaced by PD IEC 62257-5, 2015 Edition, Recommendations for small renewable energy and hybrid systems for rural electrification. Protection against electrical hazards
- DD IEC 62257-6, Withdrawn and replaced by PD IEC 62257-6, 2015 Edition, Recommendations for small renewable energy and hybrid systems for rural electrification. Acceptance, operation, maintenance and replacement
- IEC 61215-1, Edition 1.0, Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements
- IEC 61215-1-1, Edition 1.0, Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules
- IEC 61215-2, Edition 1.0, Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 2: Test procedures
- IEC 62446-1, Edition 1.0, Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 1: Grid connected systems - Documentation, commissioning tests and inspection
- IEC 62782, Edition 1.0, Photovoltaic (PV) modules - Cyclic (dynamic) mechanical load testing
- IEC 62941, Edition 1.0, Terrestrial photovoltaic (PV) modules - Guideline for increased confidence in PV module design qualification and type approval
- PD IEC 62257-2, 2015 Edition, Recommendations for renewable energy and hybrid systems for rural electrification. From requirements to a range of electrification systems
- PD IEC 62257-3, 2015 Edition, Recommendations for renewable energy and hybrid systems for rural electrification. Project development and management
- PD IEC 62257-4, 2015 Edition, Recommendations for renewable energy and hybrid systems for rural electrification. System selection and design
- PD IEC 62257-5, 2015 Edition, Recommendations for renewable energy and hybrid systems for rural electrification. Protection against electrical hazards
- PD IEC 62257-6, 2015 Edition, PD IEC/TS 62257-6 Recommendations for renewable energy and hybrid systems for rural electrification. Part 6: Acceptance, operation, maintenance and replacement
- PD IEC 62782, 2016 Edition, Photovoltaic (PV) modules. Cyclic (dynamic) mechanical load testing
- PD IEC 62941, 2016 Edition, Terrestrial photovoltaic (PV) modules. Guidelines for increased confidence in PV module design qualification and type approval
Document Center, Inc. is pleased to announce that the following new standards on Sports Equipment and Facilities are now available;
- ASTM F1543, Withdrawn without replacement, Standard Specification for Shock Attenuation Properties of Fencing Surfaces (Withdrawn 2016)
- ASTM F1936, Reapproved in 2015, Standard Specification for Impact Attenuation of Turf Playing Systems as Measured in the Field
- ASTM F2107, Reapproved in 2015, Standard Guide for Construction and Maintenance of Skinned Areas on Baseball and Softball Fields
- ASTM F2286, 2016 Edition, Standard Design and Performance Specification for Removable Mesh Fencing for Swimming Pools, Hot Tubs, and Spas
- ASTM F2810, 2015 Edition, Standard Specification for Elliptical Trainers
- ASTM F2811, 2015 Edition, Standard Test Methods for Evaluating Design and Performance Characteristics of Elliptical Trainers
- BS EN 13451-2, 2015 Edition, Swimming pool equipment. Additional specific safety requirements and test methods for ladders, stepladders and handle bends
- BS EN 13451-3, 2011 Edition with Amendment A3, Swimming pool equipment. Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features
- BS EN 16713-1, 2016 Edition, Domestic swimming pools. Water systems. Filtration systems. Requirements and test methods
- BS EN 16713-2, 2016 Edition, Domestic swimming pools. Water systems. Circulation systems. Requirements and test methods
- BS EN 16713-3, Domestic swimming pools. Water systems. Water treatment. Requirements
- ISO 20187, 2nd Edition, Inflatable play equipment - Safety requirements and test methods
