Document Center, Inc. is pleased to announce that the following Standards on Road Equipment and Installations are now available;
- ASTM D4956, 2016 B Edition, Standard Specification for Retroreflective Sheeting for Traffic Control
- ASTM D7307, 2006 Edition Reapproved in 2016, Standard Practice for Sampling of Thermoplastic Traffic Marking Materials
- ASTM D7735, 2011 Edition Reapproved in 2016, Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures
- BS 5489-2, 2016 Edition, Code of practice for the design of road lighting. Lighting of tunnels
- BS CEN 1793-5, Withdrawn and Replaced by BS EN 1793-5, Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics. In situ values of sound reflection and airborne sound insulation
- BS EN 1793-5, 2016 Edition, Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics. In situ values of sound reflection under direct sound field conditions
- JIS A 5361, 2016 Edition, Precast concrete products - General rules for classification, designation and marking
- JIS A 5364, 2016 Edition, Precast concrete products - General rules of materials and product methods
Document Center, Inc. is pleased to announce that the following Standards on Liquid Fuels are now available;
- ASTM D613, 2016 Edition with Editorial Correction, Standard Test Method for Cetane Number of Diesel Fuel Oil
- ASTM D910, 2016 Edition, Standard Specification for Leaded Aviation Gasolines
- ASTM D976, 2006 Edition Reapproved in 2016, Standard Test Method for Calculated Cetane Index of Distillate Fuels
- ASTM D2709, 2016 Edition, Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
- ASTM D3241, 2016A Edition, Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
- ASTM D3606, 2010 Edition with Editorial Correction, Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
- ASTM D4418, 2000 Edition Reapproved in 2016, Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
- ASTM D4814, 2016D Edition, Standard Specification for Automotive Spark-Ignition Engine Fuel
- ASTM D5006, 2011 Edition Reapproved in 2016, Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
- ASTM D5188, 2016 Edition, Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)
- ASTM D5622, 2016 Edition, Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
- ASTM D5797, 2016 Edition, Standard Specification for Methanol Fuel Blends (M51-M85) for Methanol-Capable Automotive Spark-Ignition Engines
- ASTM D5972, 2016 Edition, Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
- ASTM D6079, 2011 Edition Reapproved in 2016, Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
- ASTM D6728, 2016 Edition, Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
- ASTM D6730, 2011 Edition Reapproved in 2016, Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
- ASTM D6733, 2001 Edition Reapproved in 2016, Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
- ASTM D7041, 2016 Edition, Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbons and Hydrocarbon-Oxygenate Blends by Gas Chromatography with Flame Photometric Detection
- ASTM D7185, 2016 Edition, Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene
- ASTM D7398, 2011 Edition Reapproved in 2016, Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100°C to 615°C by Gas Chromatography
- ASTM D7422, 2016 Edition, Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
- ASTM D7451, 2016 Edition, Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels
- ASTM D7463, 2016 Edition, Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
- ASTM D7548, 2016 Edition, Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
- ASTM D7566, 2016B Edition, Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
- ASTM D7576, 2016 Edition, Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography
- ASTM D7688, 2011 Edition Reapproved in 2016, Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation
- ASTM D7719, 2016 Edition, Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline
- ASTM D7739, 2011 Edition Reapproved in 2016, Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance
- ASTM D7740, 2011 Edition Reapproved in 2016, Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
- ASTM D7797, 2016 Edition, Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy - Rapid Screening Method
- ASTM D7845, 2016 Edition, Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography/Mass Spectrometry
- ASTM E1259, 2016 Edition, Standard Practice for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390°C
Document Center, Inc. is pleased to announce that the following Standards on Paper and Board are now available;
- BS ISO 4046-1, 2016 Edition, Paper, board, pulps and related terms. Vocabulary. Alphabetical index
- BS ISO 8254-3, 2016 Edition, Paper and board. Measurement of specular gloss. 20° gloss with a converging beam, TAPPI method
- BS ISO 11093-4, 2016 Edition, Paper and board. Testing of cores. Measurement of dimensions
- BS ISO 16260, 2016 Edition, Paper and board. Determination of internal bond strength
- ISO 8254-3, 2nd Edition, Paper and board - Measurement of specular gloss - Part 3: 20 degree gloss with a converging beam, TAPPI method
- ISO 11093-4, 2nd Edition, Paper and board - Testing of cores - Part 4: Measurement of dimensions
- ISO 16260, 1st Edition Reprint, Paper and board - Determination of internal bond strength
Document Center, Inc. is pleased to announce that the following Standards on Doors and Windows are now available;
- BS EN 1026, 2016 Edition, Windows and doors. Air permeability. Test method
- BS EN 1027, 2016 Edition, Windows and doors. Water tightness. Test method
- BS EN 12210, 2016 Edition, Windows and doors. Resistance to wind load. Classification
- BS EN 12211, 2016 Edition, Windows and doors. Resistance to wind load. Test method
- BS EN 12608, Withdrawn and Replaced by BS EN 12608-1, Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Classification, requirements and test methods
- BS EN 12608-1, 2016 Edition, Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors. Classification, requirements and test methods. Non-coated PVC-U profiles with light coloured surfaces
- BS EN 13561, Corrigendum 1 for the 2015 Edition, External blinds and awnings. Performance requirements including safety
- IEC 60335-2-97, Edition 3.0, Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for shutters, awnings, blinds and similar equipment
- ISO 3008-3, 1st Edition, Fire resistance tests - Part 3: Door and shutter assemblies horizontally oriented
Document Center, Inc. is pleased to announce that the following Standards on Examination of Water for Chemical Substances are now available;
- ASTM D513, 2016 Edition, Standard Test Methods for Total and Dissolved Carbon Dioxide in Water
- ASTM D516, 2016 Edition, Standard Test Method for Sulfate Ion in Water
- ASTM D859, 2016 Edition, Standard Test Method for Silica in Water
- ASTM D1067, 2016 Edition, Standard Test Methods for Acidity or Alkalinity of Water
- ASTM D1179, 2016 Edition, Standard Test Methods for Fluoride Ion in Water
- ASTM D1246, 2016 Edition, Standard Test Method for Bromide Ion in Water
- ASTM D1291, 2016 Edition, Standard Practice for Estimation of Chlorine Demand of Water
- ASTM D3867, 2016 Edition, Standard Test Methods for Nitrite-Nitrate in Water
- ASTM D5464, 2016 Edition, Standard Test Method for pH Measurement of Water of Low Conductivity
- ASTM D5673, 2016 Edition, Standard Test Method for Elements in Water by Inductively Coupled Plasma - Mass Spectrometry
- ASTM D7485, 2016 Edition, Standard Test Method for Determination of Nonylphenol, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
- ASTM D7574, 2016 Edition, Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
- ASTM D7597, 2016 Edition, Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chromatography/Tandem Mass Spectrometry
- ASTM D7598, 2016 Edition, Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry
- ASTM D7599, 2016 Edition, Standard Test Method for Determination of Diethanolamine, Triethanolamine, N-Methyldiethanolamine and N-Ethyldiethanolamine in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
- ASTM D7600, 2016 Edition, Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry
- ASTM D7644, 2016 Edition, Standard Test Method for Determination of Bromadiolone, Brodifacoum, Diphacinone and Warfarin in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
- ASTM D7645, 2016 Edition, Standard Test Method for Determination of Aldicarb, Aldicarb Sulfone, Aldicarb Sulfoxide, Carbofuran, Methomyl, Oxamyl and Thiofanox in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
- BS EN ISO 17943, 2016 Edition, Water quality. Determination of volatile organic compounds in water. Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS)
- BS EN ISO 18635, 2016 Edition, Water quality. Determination of short-chain polychlorinated alkanes (SCCPs) in sediment, sewage sludge and suspended (particulate) matter. Method using gas chromatography-mass spectrometry (GC-MS) and electron capture negative ionization (ECNI)
- ISO 17943, 1st Edition, Water quality - Determination of volatile organic compounds in water - Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS)
- ISO 17951-1, 1st Edition, Water quality - Determination of fluoride using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation
- ISO 17951-2, 1st Edition, Water quality - Determination of fluoride using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA) with automated in-line distillation
- ISO 18635, 1st Edition, Water quality - Determination of short-chain polychlorinated alkanes (SCCPs) in sediment, sewage sludge and suspended (particulate) matter - Method using gas chromatography-mass spectrometry (GC-MS) and electron capture negative ionization (ECNI)
Document Center, Inc. is pleased to announce that the following standards on Energy and Heat Transfer Engineering are now available;
- BS EN ISO/IEC13273-1, 2016 Edition, Energy efficiency and renewable energy sources. Common international terminology. Energy efficiency
- BS EN ISO/IEC13273-2, 2016 Edition, Energy efficiency and renewable energy sources. Common international terminology. Renewable energy sources
- BS ISO 17741, 2016 Edition, General technical rules for measurement, calculation and verification of energy savings of projects
- ISO 17743, 1st Edition, Energy savings - Definition of a methodological framework applicable to calculation and reporting on energy savings
- PD CEN/CLC 16103, Withdrawn and Replaced by BS EN ISO/IEC13723-1 and BS EN ISO/IEC13273-2, Energy management and energy efficiency. Glossary of terms
- PD CEN 16103, Withdrawn and Replaced by BS EN ISO/IEC13273-1 and BS EN ISO/IEC13273-2, Energy management and energy efficiency. Glossary of terms
Document Center, Inc. is pleased to announce that the following Standards on Lubricants, Oils, and Related Products are now available;
- ASTM C1234, 2011 Edition Reapproved in 2016, Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
- ASTM D566, 2016 Edition, Standard Test Method for Dropping Point of Lubricating Grease
- ASTM D892, 2013 Edition with Editorial Correction, Standard Test Method for Foaming Characteristics of Lubricating Oils
- ASTM D972, 2016 Edition, Standard Test Method for Evaporation Loss of Lubricating Greases and Oils
- ASTM D1091, 2011 Edition Reapproved in 2016, Standard Test Methods for Phosphorus in Lubricating Oils and Additives
- ASTM D1264, 2016 Edition, Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
- ASTM D3244, 2016 Edition, Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
- ASTM D3525, 2004 Edition Reapproved in 2016, Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
- ASTM D3707, Withdrawn Without Replacement, Standard Test Method for Storage Stability of Water-in-Oil Emulsions by the Oven Test Method
- ASTM D3709, Withdrawn Without Replacement, Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions
- ASTM D4742, 2016 Edition, Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
- ASTM D5453, 2016 Edition with Editorial Correction, Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
- ASTM D5579, 2016 Edition, Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test
- ASTM D5704, 2016 Edition, Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
- ASTM D6121, 2016 Edition, Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
- ASTM D6138, 2016 Edition, Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)
- ASTM D6304, 2016 Edition, Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
- ASTM D6593, 2016 Edition, Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
- ASTM D6681, 2016 Edition, Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine - Caterpillar 1P Test Procedure
- ASTM D6984, 2016 Edition, Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
- ASTM D7320, 2016 Edition, Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
- ASTM D7452, 2016 Edition, Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
- ASTM 7549, 2016 Edition, Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions - Caterpillar C13 Test Procedure
- ASTM D7563, 2010 Edition Reapproved in 2016, Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel
Document Center, Inc. is pleased to announce that the following Standards on Software are now available;
- BS ISO/IEC 19770-3, 2016 Edition, Information technology. IT asset management. Entitlement schema
- BS ISO/IEC 24748-4, 2016 Edition, Systems and software engineering. Life cycle management. Systems engineering planning
- BS ISO/IEC 25022, 2016 Edition, Systems and software engineering. Systems and software quality requirements and evaluation (SQuaRE). Measurement of quality in use
- BS ISO/IEC 25023, 2016 Edition, Systems and software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Measurement of system and software product quality
- BS ISO/IEC 25066, 2016 Edition, Systems and software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Common Industry Format (CIF) for Usability. Evaluation Report
- BS ISO/IEC 26551, 2016 Edition, Software and systems engineering. Tools and methods for product line requirements engineering
- BS ISO/IEC 26702, Withdrawn and Replaced by BS ISO/IEC 24748-4, Systems engineering. Application and management of the systems engineering process
- BS ISO/IEC 29169, 2016 Edition, Information technology. Process assessment. Application of conformity assessment methodology to the assessment to process quality characteristics and organizational maturity
- ISO/IEC 9126-2, Partially Replaced by ISO/IEC 25023, Software engineering - Product quality - Part 2: External metrics
- ISO/IEC 9126-3, Partially Replaced by ISO/IEC 25023, Software engineering - Product quality - Part 3: Internal metrics
- ISO/IEC 19759, 2nd Edition Reprint, Software Engineering - Guide to the software engineering body of knowledge (SWEBOK)
- ISO/IEC 19770-3, 1st Edition, Information technology - IT asset management - Part 3: Entitlement schema
- ISO/IEC 24748-1, 2nd Edition, Systems and software engineering - Life cycle management - Part 1: Guidelines for life cycle management
- ISO/IEC 25023, 1st Edition, Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Measurement of system and software product quality
- ISO/IEC 25066, 1st Edition, Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for Usability - Evaluation Report
- ISO/IEC 26551, 2nd Edition, Software and systems engineering - Tools and methods for product line requirements engineering
- ISO/IEC 26702, Withdrawn and Replaced by ISO/IEC/IEEE 24748-4, Systems engineering -- Application and management of the systems engineering process
- ISO/IEC 29110-1, 2nd Edition, Systems and software engineering - Lifecycle profiles for Very Small Entities (VSEs) - Part 1: Overview
- ISO/IEC 29110-2-2, 1st Edition, Systems and software engineering - Lifecycle profiles for Very Small Entities (VSEs) - Part 2-2: Guide for the development of domain-specific profiles
- ISO/IEC 29110-5-2-1, 1st Edition, Systems and software engineering - Lifecycle profiles for Very Small Entities (VSEs) - Part 5-2-1: Organizational management guidelines
- ISO/IEC 29169, 1st Edition, Information technology - Process assessment - Application of conformity assessment methodology to the assessment to process quality characteristics and organizational maturity
- ISO/IEC 33052, 1st Edition, Information technology - Process reference model (PRM) for information security management
- PAS 212, 2016 Edition, Automatic resource discovery for the Internet of Things. Specification
- PD ISO/IEC 9126-2, Withdrawn and Replaced by BS ISO/IEC 25023, Software engineering. Product quality. External metrics
- PD ISO/IEC 9126-3, WIthdrawn and Replaced by BS ISO/IEC 25023, Software engineering. Product quality. Internal metrics
- PD ISO/IEC 9126-4, Withdrawn and Replaced by BS ISO/IEC 25022, Software engineering. Product quality. Quality in use metrics
- PD ISO/IEC 19759, 2016 Edition, Software Engineering. Guide to the software engineering body of knowledge (SWEBOK)
- PD ISO/IEC 24748-1, 2016 Edition, Systems and software engineering. Life cycle management. Guidelines for life cycle management
- PD ISO/IEC 29110-1, 2016 Edition, Systems and software engineering. Lifecycle profiles for Very Small Entities (VSEs). Overview
- PD ISO/IEC 29110-5-2, 2016 Edition, Systems and software engineering. Lifecycle profiles for Very Small Entities (VSEs). Organizational management guidelines
- PD ISO/IEC 33052, 2016 Edition, Information technology. Process reference model (PRM) for information security management
Document Center, Inc. is pleased to announce that the following Standards on Cooking Ranges, Working Tables, Ovens and Similar Appliances are now available;
- ASTM F2238, 2016 Edition, Standard Test Method for Performance of Rapid Cook Ovens
- BS EN 60335-2-25, 2012 Edition with Amendment 2, Household and similar electrical appliances. Safety. Particular requirements for microwave ovens, including combination microwave ovens
- BS EN 60350-2, 2013 Edition with Amendment 11, Household electric cooking appliances. Hobs. Methods for measuring performance
- IEC 60335-2-9-2, Amendment 2 for Edition 6.0, Amendment 2 - Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
- IEC 60335-2-31-1, Amendment 1 for Edition 5.0, Amendment 1 - Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors
- IEC 60350-1, Edition 2.0, Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance
Document Center, Inc. is pleased to announce that the following Standards on Safety of Machinery are now available;
- BS EN ISO 14122-1, 2016 Edition, Safety of machinery. Permanent means of access to machinery. Choice of fixed means and general requirements of access
- BS EN ISO 14122-2, 2016 Edition, Safety of machinery. Permanent means of access to machinery. Working platforms and walkways
- BS EN ISO 14122-3, 2016 Edition, Safety of machinery. Permanent means of access to machinery. Stairs, stepladders and guard-rails
- BS EN ISO 14122-4, 2016 Edition, Safety of machinery. Permanent means of access to machinery. Fixed ladders
- IEC 61511-1, Edition 2.0, Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements
- IEC 61800-5-2, Edition 2.0, Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
- ISO 14122-1, 2nd Edition, Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access
- ISO 14122-2, 2nd Edition, Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways
- ISO 14122-3, 2nd Edition, Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails
- ISO 14122-4, 2nd Edition, Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders
Document Center, Inc. is pleased to announce that the following Standards on Fertilizers are now available;
- BS ISO 18644, 2016 Edition, Fertilizers and soil conditioners. Controlled-release fertilizer. General requirements
- ISO 14820-1, 1st Edition, Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling
- ISO 14820-2, 1st Edition, Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation
- ISO 15604, 1st Edition, Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
- ISO 18644, 1st Edition, Fertilizers and soil conditioners - Controlled-release fertilizer - General requirements
- ISO 25475, 1st Edition, Fertilizers - Determination of ammoniacal nitrogen
- ISO 25705, 1st Edition, Fertilizers - Determination of urea condensates using high-performance liquid chromatography (HPLC) - Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B)
Document Center, Inc. is pleased to announce that the following Standards on Concrete Structures are now available;
- ASTM A1044, 2016A Edition, Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
- ASTM C1542, 2016A Edition, Standard Test Method for Measuring Length of Concrete Cores
- ASTM C1603, 2016 Edition, Standard Test Method for Measurement of Solids in Water
- ASTM F2170, 2016 Edition, Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
- BS EN 1504-8, 2016 Edition, Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and AVCP. Quality control and Assessment and verification of the constancy of performance (AVCP)
- BS 6744, 2016 Edition, Stainless steel bars. Reinforcement of concrete. Requirements and test methods
Document Center, Inc. is pleased to announce that the following Standards on Electricity Supply Systems are now available;
- BS EN 50310, 2016 Edition, Telecommunications bonding networks for buildings and other structures
- BS EN 61140, 2016 Edition, Protection against electric shock. Common aspects for installation and equipment
- BS EN 62052-31, 2016 Edition, Electricity metering equipment (AC). General requirements, tests and test conditions. Product safety requirements and tests
- IEC 60364-6, Edition 2.0, Low voltage electrical installations - Part 6: Verification
- IEC 62056-1-1, Edition 1.0, Electricity metering data exchange - The DLMS/COSEM suite - Part 1-1: Template for DLMS/COSEM communication profile standards
- IEC 62056-6-9, Edition 1.0, Electricity metering data exchange - The DLMS/COSEM suite - Part 6-9: Mapping between the Common Information Model message profiles (IEC 61968-9) and DLMS/COSEM (IEC 62056) data models and protocols
- IEC 62056-7-5, Edition 1.0, Electricity metering data exchange - The DLMS/COSEM suite - Part 7-5: Local data transmission profiles for Local Networks (LN)
- IEC 62056-9-1, Edition 1.0, Electricity metering data exchange - The DLMS/COSEM suite - Part 9-1: Communication profile using web-services to access a DLMS/COSEM server via a COSEM Access Service (CAS)
- PD IEC 62056-1-1, 2016 Edition, Electricity metering data exchange. The DLMS/COSEM suite. Template for DLMS/COSEM communication profile standards
- PD IEC 62056-6-9, 2016 Edition, Electricity metering data exchange. The DLMS/COSEM suite. Mapping between the Common Information Model message profiles (IEC 61968-9) and DLMS/COSEM (IEC 62056) data models and protocols
- PD IEC 62056-9-1, 2016 Edition, Electricity metering data exchange. The DLMS/COSEM suite. Communication profile using web-services to access a DLMS/COSEM server via a COSEM Access Service (CAS)
Document Center, Inc. is pleased to announce that the following Standards on Copper Products are now available;
- ASTM B96, 2016 Edition, Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
- ASTM B115, 2010 Edition Reapproved in 2016, Standard Specification for Electrolytic Copper Cathode
- ASTM B121, 2016 Edition, Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
- ASTM B122, 2016 Edition, Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
- ASTM B124, 2016 Edition, Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
- ASTM B187, 2016 Edition, Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes
- ASTM B188, 2015 Edition with Editorial Correction, Standard Specification for Seamless Copper Bus Pipe and Tube
- ASTM B216, 2016 Edition, Standard Specification for Tough-Pitch Fire-Refined Copper Refinery Shapes
- ASTM B283, 2016 Edition, Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
- ASTM B369, 2009 Edition Reapproved in 2016, Standard Specification for Copper-Nickel Alloy Castings
- ASTM B508, 2016 Edition, Standard Specification for Copper Alloy Strip for Flexible Metal Hose
- ASTM B950, 2016 Edition, Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
- ASTM B968, 2016 Edition, Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube
- BS EN 12735-1, 2016 Edition, Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration. Tubes for piping systems
- BS EN 12735-2, 2016 Edition, Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration. Tubes for equipment
Document Center, Inc. is pleased to announce that the following Standards on Transport in General are now available;
- BS ISO 13184-2, 2016 Edition, Intelligent transport systems (ITS). Guidance protocol via personal ITS station for advisory safety systems. Road guidance protocol (RGP) requirements and specification
- ISO 13184-2, 1st Edition, Intelligent transport systems (ITS) - Guidance protocol via personal ITS station for advisory safety systems - Part 2: Road guidance protocol (RGP) requirements and specification
- ISO 17425, 1st Edition, Intelligent transport systems - Cooperative systems - Data exchange specification for in-vehicle presentation of external road and traffic related data
- ISO 21219-9, 1st Edition, Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) - Part 9: Service and network information (TPEG2-SNI)
- ISO 21219-10, 1st Edition, Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) - Part 10: Conditional access information (TPEG2-CAI)
- ISO 21219-14, 1st Edition, Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) - Part 14: Parking information application (TPEG2-PKI)
- ISO 21219-15, 1st Edition, Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) - Part 15: Traffic event compact (TPEG2-TEC)
- ISO 21219-19, 1st Edition, Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) - Part 19: Weather information (TPEG2-WEA)
- PD ISO 21219-9, 2016 Edition, Intelligent transport systems. Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2). Service and network information (TPEG2-SNI)
- PD ISO 21219-10, 2016 Edition, Intelligent transport systems. Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2). Conditional access information (TPEG2-CAI)
- PD ISO 21219-14, 2016 Edition, Intelligent transport systems. Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2). Parking information application (TPEG2-PKI)
- PD ISO 21219-15, 2016 Edition, Intelligent transport systems. Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2). Traffic event compact (TPEG2-TEC)
Document Center, Inc. is pleased to announce that the following Standards on Telecontrol and Telemetering are now available;
- BS EN 60870-5-101, 2003 Edition with Amendment 1, Telecontrol equipment and systems. Transmission protocols. Companion standard for basic telecontrol tasks
- BS EN 61968-8, 2016 Edition, Application integration at electric utilities. System interfaces for distribution management. Interfaces for customer operations
- IEC 60870-5-104-AM1, Amendment 1 for Edition 2.0, Amendment 1 - Telecontrol equipment and systems - Part 5-104: Transmission protocols - Network access for IEC 60870-5-101 using standard transport profiles
- IEC 60870-5-604, Edition 2.0, Telecontrol equipment and systems - Part 5-604: Conformance test cases for the IEC 60870-5-104 companion standard
- IEC 61850-90-3, Edition 1.0, Communication networks and systems for power utility automation - Part 90-3: Using IEC 61850 for condition monitoring diagnosis and analysis
- IEC 61850-90-8, Edition 1.0, Communication networks and systems for power utility automation - Part 90-8: Object model for E-mobility
- IEC 62325-351, Edition 1.0, Framework for energy market communications - Part 351: CIM European market model exchange profile
- IEC 62351-12, Edition 1.0, Power systems management and associated information exchange - Data and communications security - Part 12: Resilience and security recommendations for power systems with distributed energy resources (DER) cyber-physical systems
- IEC 62361-100, Edition 1.0, Power systems management and associated information exchange - Interoperability in the long term - Part 100: CIM profiles to XML schema mapping
- IEC/IEEE 61850-9-3, Edition 1.0, Communication networks and systems for power utility automation - Part 9-3: Precision time protocol profile for power utility automation
- IEC/PAS 61850-9-3, Withdrawn and replaced by IEC/IEEE 61850-9-3, Communication networks and systems for power utility automation - Part 9-3: Precision time protocol profile for power utility automation
Document Center, Inc. is pleased to announce that the following Standards on Cement, Gypsum, Lime, and Mortar are now available;
- ASTM C11, 2016 Edition, Standard Terminology Relating to Gypsum and Related Building Materials and Systems
- ASTM C25, 2011 Edition with Editorial Correction, Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
- ASTM C109, 2016A Edition, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
- ASTM C150, 2016 Edition with Editorial Correction, Standard Specification for Portland Cement
- ASTM C199, 1984 Edition Reapproved in 2016, Standard Test Method for Pier Test for Refractory Mortars
- ASTM C465, 2016 Edition, Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
- ASTM C595, 2016 Edition, Standard Specification for Blended Hydraulic Cements
- ASTM C786, 2010 Edition Reapproved in 2016, Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-µm (No. 50), 150-µm (No. 100), and 75-µm (No. 200) Sieves by Wet Methods
- ASTM C827, 2016 Edition, Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
- ASTM C926, 2016A Edition, Standard Specification for Application of Portland Cement-Based Plaster
- ASTM C1063, 2016A Edition, Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
- ASTM C1329, 2016 Edition, Standard Specification for Mortar Cement
- ASTM C1655, 2006 Edition Reapproved in 2016, Standard Classification of Fireclay and High-Alumina Mortars
- ASTM C1704, 2009A Edition Reapproved in 2016, Standard Test Method for Sampling and Testing Structural Cementitious Panels
- ASTM C1705, 2009 Edition Reapproved in 2016, Standard Specification for Structural Cementitious Panels
- BS EN 196-1, 2016 Edition, Methods of testing cement. Determination of strength
- BS EN 196-10, 2016 Edition, Methods of testing cement. Determination of the water-soluble chromium (VI) content of cement
- BS EN 1015-12, 2016 Edition, Methods of test for mortar for masonry. Determination of adhesive strength of hardened rendering and plastering mortars on substrates
- PAS 8820, 2016 Edition, Construction materials. Alkali-activated cementitious material and concrete. Specification
- PD CEN 16912, 2016 Edition, Guidelines for a procedure to support the European standardization of cements
Document Center, Inc. is pleased to announce that the following Standards on Thermoplastic Materials are now available;
- ASTM D1786, 2016 Edition, Standard Specification for Toluene Diisocyanate
- ASTM D3835, 2016 Edition, Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
- ASTM D4101, 2014 Edition with Editorial Correction, Standard Specification for Polypropylene Injection and Extrusion Materials
- ASTM D4226, 2016 Edition, Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
- ASTM D4274, 2016 Edition, Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols
- ASTM D4634, 2016 Edition, Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)
- ASTM D4673, 2016 Edition, Standard Test Method for Polyurethane Raw Materials: Determination of Unsaturation of Polyols
- ASTM D4703, 2016 Edition, Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
- ASTM D5870, 2016 Edition, Standard Practice for Calculating Property Retention Index of Plastics
- ASTM D6150, 2016 Edition, Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility
- ASTM D6777, 2016 Edition, Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding
- ASTM D7083, 2016 Edition, Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography
- ASTM F1741, 2008 Edition Reapproved in 2016, Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
- BS EN ISO 14910-2, Corrigendum 1 for the 2013 Edition, Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Preparation of test specimens and determination of properties
- DIN EN ISO 2580-1, Withdrawn and Replaced by DIN EN ISO 19062-1, Plastics - Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
Document Center, Inc. is pleased to announce that the following Standards on Laboratory Medicine are now available;
- ASTM E2548, 2016 Edition, Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis
- ASTM F2567, Withdrawn Without Replacement, Standard Practice for Testing for Classical Pathway Complement Activation in Serum by Solid Materials
- CLSI-H48, 2nd Edition, Determination of Coagulation Factor Activities Using the One-Stage Clotting Assay
- DIN EN ISO 22442-1, 2016 Edition, Medical devices utilizing animal tissues and their derivatives - Part 1: Application of risk management
- DIN EN ISO 22442-2, 2016 Edition, Medical devices utilizing animal tissues and their derivatives - Part 2: Controls on sourcing, collection and handling
- PD CEN 16945, 2016 Edition, Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for metabolomics in urine, venous blood serum and plasma
- SS EN ISO 22442-1, 2015 Edition, Medical devices utilizing animal tissues and their derivatives - Part 1: Application of risk management
- SS EN ISO 22442-2, 2015 Edition, Medical devices utilizing animal tissues and their derivatives -- Part 2: Controls on sourcing, collection and handling
Document Center, Inc. is pleased to announce that the following Standards on Coals are now available;
- ASTM D1857, 2016 Edition, Standard Test Method for Fusibility of Coal and Coke Ash
- ASTM D409, 2012 Edition with Editorial Correction, Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
- BS 6127-1, Withdrawn and Replaced by BS ISO 7404-1, Petrographic analysis of bituminous coal and anthracite. Glossary of terms relating to the petrographic analysis of bituminuous coal and anthracite
- BS ISO 7404-1, 2016 Edition, Methods for the petrographic analysis of coals. Vocabulary
- BS ISO 13909-1, 2016 Edition, Hard coal and coke. Mechanical sampling. General introduction
- BS ISO 13909-2, 2016 Edition, Hard coal and coke. Mechanical sampling. Coal. Sampling from moving streams
- BS ISO 13909-3, 2016 Edition, Hard coal and coke. Mechanical sampling. Coal. Sampling from stationary lots
- BS ISO 13909-4, 2016 Edition, Hard coal and coke. Mechanical sampling. Coal. Preparation of test samples
- BS ISO 13909-5, 2016 Edition, Hard coal and coke. Mechanical sampling. Coke. Sampling from moving streams
- BS ISO 13909-6, 2016 Edition, Hard coal and coke. Mechanical sampling. Coke. Preparation of test samples
- BS ISO 13909-7, 2016 Edition, Hard coal and coke. Mechanical sampling. Methods for determining the precision of sampling, sample preparation and testing
- BS ISO 13909-8, 2016 Edition, Hard coal and coke. Mechanical sampling. Methods of testing for bias
- ISO 13909-1, 2nd Edition, Hard coal and coke - Mechanical sampling - Part 1: General introduction
- ISO 13909-2, 2nd Edition, Hard coal and coke - Mechanical sampling - Part 2: Coal - Sampling from moving streams
- ISO 13909-3, 2nd Edition, Hard coal and coke - Mechanical sampling - Part 3: Coal - Sampling from stationary lots
- ISO 13909-4, 2nd Edition, Hard coal and coke - Mechanical sampling - Part 4: Coal - Preparation of test samples
- ISO 13909-7, 2nd Edition, Hard coal and coke - Mechanical sampling - Part 7: Methods for determining the precision of sampling, sample preparation and testing
- ISO 13909-8, 2nd Edition, Hard coal and coke - Mechanical sampling - Part 8: Methods of testing for bias
Document Center, Inc. is pleased to announce that the following Standards on Electrical Engineering in General are now available;
- BS EN 60270, 2001 Edition with Amendment 1, High-voltage test techniques. Partial discharge measurements
- BS EN 60695-1-20, 2016 Edition, Fire hazard testing. Guidance for assessing the fire hazard of electrotechnical products. Ignitability. General guidance
- BS EN 60695-11-20, Corrigendum 1 for the 2015 Edition, Fire hazard testing. Test flames. 500 W flame test methods
- BS EN 60909-0, 2016 Edition, Short-circuit currents in three-phase a.c. systems. Calculation of currents
- BS EN 61140, 2016 Edition, Protection against electric shock. Common aspects for installation and equipment
- BS IEC 61882, Withdrawn and Replaced by BS EN 61882, Hazard and operability studies (HAZOP studies). Application guide
- BS IEC 62793, 2016 Edition, Protection against lightning. Thunderstorm warning systems
- IEC 61340-2-3, 2nd Edition, Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation
- IEC 61340-4-9, 2nd Edition, Electrostatics - Part 4-9: Standard test methods for specific applications - Garments
- IEC 61340-5-1, 2nd Edition, Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements
- IEC 62793, 1st Edition, Protection against lightning - Thunderstorm warning systems
