New Animal and Vegetable Fats and Oils Standards for the 1st Quarter 2017

Document Center, Inc. is pleased to announce that the following Standards on Animal and Vegetable Fats and Oils are now available;

• ASTM E1083, 2002 Edition Reapproved in 2017, Standard Test Method for Sensory Evaluation of Red Pepper Heat
• ASTM E1395, 1990 Edition Reapproved in 2017, Standard Test Method for Sensory Evaluation of Low Heat Chilies
• BS EN ISO 663, 2017 Edition, Animal and vegetable fats and oils. Determination of insoluble impurities content
• BS EN ISO 3960, 2017 Edition, Animal and vegetable fats and oils. Determination of peroxide value. Iodometric (visual) endpoint determination
• BS EN ISO 6320, 2017 Edition, Animal and vegetable fats and oils. Determination of refractive index
• BS EN ISO 6883, 2017 Edition, Animal and vegetable fats and oils. Determination of conventional mass per volume (litre weight in air)
• BS EN ISO 8534, 2017 Edition, Animal and vegetable fats and oils. Determination of water content. Karl Fischer method (pyridine free) 
• BS EN ISO 12228-1, Corrigendum 2 for the 2014 Edition, Determination of individual and total sterols contents. Gas chromatographic method. Animal and vegetable fats and oils
• BS EN ISO 15774, 2017 Edition, Animal and vegetable fats and oils. Determination of cadmium content by direct graphite furnace atomic absorption spectrometry 
• ISO 663, 5th Edition, Animal and vegetable fats and oils - Determination of insoluble impurities content
• ISO 3960, 5th Edition, Animal and vegetable fats and oils - Determination of peroxide value - Iodometric (visual) endpoint determination
• ISO 6320, 5th Edition, Animal and vegetable fats and oils - Determination of refractive index
• ISO 6883, 5th Edition, Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air)
• ISO 8534, 3rd Edition, Animal and vegetable fats and oils - Determination of water content - Karl Fischer method (pyridine free)
• ISO 15774, 2nd Edition, Animal and vegetable fats and oils - Determination of cadmium content by direct graphite furnace atomic absorption spectrometry

For more standards like these, please refer to our Document Center List of Standards on Animal and Vegetable Fats and Oils.

New Geology, Meteorology, and Hydrology Standards for the 1st Quarter 2017

Document Center, Inc. is please to announce that the following Standards on Geology, Meteorology, and Hydrology are now available;
  

• ASTM D3631, 1999 Edition Reapproved in 2017, Standard Test Methods for Measuring Surface Atmospheric Pressure
• ASTM D4696, Withdrawn Without Replacement, Standard Guide for Pore-Liquid Sampling from the Vadose Zone 
• ASTM D5096, 2002 Edition Reapproved in 2017, Standard Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer
• ASTM D5527, 2000 Edition Reapproved in 2017 with Editorial Correction, Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means
• ASTM D6527, Withdrawn Without Replacement, Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation
• ASTM D6639, Withdrawn Without Replacement, Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Investigations
• BS EN 16870, 2017 Edition, Water quality. Guidance standard on determining the degree of modification of lake hydromorphology

For more standards like these, please refer to our Document Center List of Standards on Geology, Meteorogy, and Hydrology. 

New Chemical Analysis Standards for the 1st Quarter 2017

Document Center, Inc. is pleased to announce that the following Standards on Chemical Analysis are now available;

• ASTM D7375, Withdrawn Without Replacement, Standard Test Method for Trace Quantities of Water in Aromatic Hydrocarbons and Their Mixtures by Coulometric Karl Fischer Titration
• ASTM D7959, 2016 Edition, Standard Test Method for Chloride Content Determination of Aviation Turbine Fuels using Chloride Test Strip
• ASTM E191, 1964 Edition Reapproved in 2017, Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
• ASTM E506, 2017 Edition, Standard Test Method for Mercury in Liquid Chlorine
• BS EN 16640, 2017 Edition, Bio-based products. Bio-based carbon content. Determination of the bio-based carbon content using the radiocarbon method
• BS EN 50436-3, 2016 Edition, Alcohol interlocks. Test methods and performance requirements. Guidance for authorities, decision makers, purchasers and users 
• BS EN 50436-7, 2016 Edition, Alcohol interlocks. Test methods and performance requirements. Installation document 
• BS ISO 15470, 2017 Edition, Surface chemical analysis. X-ray photoelectron spectroscopy. Description of selected instrumental performance parameters
• BS ISO 16962, 2017 Edition, Surface chemical analysis. Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
• ISO 15470, 2nd Edition, Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
• ISO 16962, 2nd Edition, Surface chemical analysis - Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry

For more standards like these, please refer to our Document Center List of Standards on Chemical Analysis.

New Anaesthetic, Respiratory, and Reanimation Equipment Standards for the 1st Quarter 2017

Document Center, Inc. is pleased to announce that the following Standards on Anaesthetic, Respiratory, and Reanimation Equipment are now available.

• ASTM F1242, Withdrawn Without Replacement, Standard Specification for Cuffed and Uncuffed Tracheal Tube
• BS EN 60601-2-10, 2015 Edition with Amendment 1, Medical electrical Equipment. Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
• BS EN 60601-2-19, 2009 Edition with Amendment 1, Medical electrical equipment. Particular requirements for the basic safety and essential performance of infant incubators
• BS EN 60601-2-20, 2009 Edition with Amendment 1, Medical electrical equipment. Particular requirements for the basic safety and essential performance of infant transport incubators
• BS EN 60601-2-21, 2009 Edition with Amendment 1, Medical electrical equipment. Particular requirements for the basic safety and essential performance of infant radiant warmers
• BS ISO 18562-1, 2017 Edition, Biocompatibility evaluation of breathing gas pathways in healthcare applications. Evaluation and testing within a risk management process
• BS ISO 18562-2, 2017 Edition, Biocompatibility evaluation of breathing gas pathways in healthcare applications. Tests for emissions of particulate matter
• BS ISO 18562-3, 2017 Edition, Biocompatibility evaluation of breathing gas pathways in healthcare applications. Tests for emissions of volatile organic compounds (VOCs)
• BS ISO 18562-4, 2017 Edition, Biocompatibility evaluation of breathing gas pathways in healthcare applications. Tests for leachables in condensate
• ISO 18562-1, 1st Edition, Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 1: Evaluation and testing within a risk management process
• ISO 18562-2, 1st Edition, Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter
• ISO 18562-3, 1st Edition, Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 3: Tests for emissions of volatile organic compounds (VOCs)
• ISO 18562-4, 1st Edition, Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 4: Tests for leachables in condensate

For more standards like these, please refer to our Document Center List of Standards on Anaesthetic, Respiratory, and Reanimation Equipment.

New Plastics Standards for the 1st Quarter 2017

Document Center, Inc. is pleased to announce that the following Standards on Plastics in General are now available;

• ASTM D2990, 2017 Edition, Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
• ASTM D6272, 2017 Edition, Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
• BS EN ISO 177, 2017 Edition, Plastics. Determination of migration of plasticizers
• BS EN ISO 29664, 2010 Edition, Plastics. Artificial weathering including acidic deposition
• BS ISO 12992, 2017 Edition, Plastics. Vertical flame spread determination for film and sheet
• BS ISO 16620-5, 2017 Edition, Plastics. Biobased content. Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
• ISO 12992, 2nd Edition, Plastics - Vertical flame spread determination for film and sheet
• ISO 16620-5, 1st Edition, Plastics - Biobased content - Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
• ISO 19929, 1st Edition, Plastics - Determination of average molecular mass and mixture ratio of poly(ethylene glycol) and its derivatives by MALDI-TOF-MS

For more standards like these, please refer to our Document Center List of Standards on Plastics in General.

New Navigation and Control Equipment Standards for the 1st Quarter 2017

Document Center, Inc. is pleased to announce that the following Standards on Navigation and Control Equipment are now available;

• ASTM F823, 1993 Edition Reapproved in 2017, Standard Specification for Desk, Log, Marine, Steel, with Cabinet
• ASTM F824, 1993 Edition Reapproved in 2017, Standard Specification for Tables, Mess, Marine, Steel
• BS EN 61162-1, 2016 Edition, Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Single talker and multiple listeners
• BS EN 62320-2, 2017 Edition, Maritime navigation and radiocommunication equipment and systems. Automatic identification system (AIS). AIS AtoN Stations. Operational and performance requirements, methods of testing and required test results
• BS EN 62940, 2017 Edition, Maritime navigation and radiocommunication equipment and systems. Integrated communication system (ICS). Operational and performance requirements, methods of testing and required test results
• BS ISO 13643-1, 2017 Edition, Ships and marine technology. Manoeuvring of ships. General concepts, quantities and test conditions
• BS ISO 13643-2, 2017 Edition, Ships and marine technology. Manoeuvring of ships. Turning and yaw checking
• BS ISO 13643-3, 2017 Edition, Ships and marine technology. Manoeuvring of ships. Yaw stability and steering
• BS ISO 13643-4, 2017 Edition, Ships and marine technology. Manoeuvring of ships. Stopping, acceleration, traversing
• BS ISO 13643-5, 2017 Edition, Ships and marine technology. Manoeuvring of ships. Submarine specials
• BS ISO 13643-6, 2017 Edition, Ships and marine technology. Manoeuvring of ships. Model test specials
• IEC 62287-2, Edition, 2.0, Maritime navigation and radiocommunication equipment and systems - Class B shipborne equiment of the automatic identification system (AIS) - Part 2: Self-organising time division multiple access (SOTDMA) techniques
• ISO 13643-1, 2nd Edition, Ships and marine technology - Manoeuvring of ships - Part 1: General concepts, quantities and test conditions
• ISO 13643-2, 2nd Edition, Ships and marine technology - Manoeuvring of ships - Part 2: Turning and yaw checking
• ISO 13643-3, 2nd Edition, Ships and marine technology - Manoeuvring of ships - Part 3: Yaw stability and steering
• ISO 13643-4, 2nd Edition, Ships and marine technology - Manoeuvring of ships - Part 4: Stopping, acceleration, traversing
• ISO 13643-5, 2nd Edition, Ships and marine technology - Manoeuvring of ships - Part 5: Submarine specials
• ISO 13643-6, 2nd Edition, Ships and marine technology - Manoeuvring of ships - Part 6: Model test specials

For more standards like these, please refer to our Document Center List of Standards on Navigation and Control Equipment.

New Sterilization and Disinfection Standards for the 1st Quarter 2017

Document Center, Inc. is pleased to announce that the following Standards on Sterilization and Disinfection in General are now available;

• AAMI TIR40, 2009 Edition Reapproved in 2016, Sterilization of health care products - Radiation - Guidance on dose setting utilizing a Modified Method 2
• AAMI TIR56, 2013 Edition Reapproved in 2016, Guidance for the development, validation and routine control of an ethylene oxide sterilization process utilizing flexible bag systems for the sterilization of medical devices
• ISO 11138-1, 3rd Edition, Sterilization of health care products - Biological indicators - Part 1: General requirements
• ISO 11138-2, 3rd Edition, Sterilization of health care products - Biological indicators - Part 2: Biological indicators for ethylene oxide sterilization processes
• ISO 11138-3, 3rd Edition, Sterilization of health care products - Biological indicators - Part 3: Biological indicators for moist heat sterilization processes
• ISO 11138-4, 3rd Edition, Sterilization of health care products - Biological indicators - Part 4: Biological indicators for dry heat sterilization processes
• ISO 11138-5, 2nd Edition, Sterilization of health care products - Biological indicators - Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes

For more standards like these, please refer to our Document Center List of Standards on Sterilization and Disinfection in General.

New Leather and Furs Standards for the 1st Quarter 2017

Document Center, Inc. is pleased to announce that the following Standards on Leather and Furs are now available;

• BS EN 16887, 2017 Edition, Leather. Environmental footprint. Product Category Rules (PCR). Carbon footprints
• BS EN ISO 2420, 2017 Edition, Leather, Physical and mechanical tests, Determination of apparent density and mass per unit area
• BS EN ISO 4044, 2017 Edition, Leather. Chemical tests. Preparation of chemical test samples
• BS EN ISO 5402-1, 2017 Edition, Leather. Determination of flex resistance. Flexometer method
• BS EN ISO 17075, Withdrawn and Replaced by BS EN ISO 17075-1 and BS EN ISO 17075-2, Leather. Chemical tests. Determination of chromium(VI) content
• BS EN ISO 17075-1, 2017 Edition, Leather. Chemical determination of chromium(VI) content in leather. Colorimetric method
• BS EN ISO 17075-2, 2017 Edition, Leather. Chemical determination of chromium(VI) content in leather. Chromatographic method
• BS EN ISO 17232, 2017 Edition, Leather. Physical and mechanical tests. Determination of heat resistance of patent leather
• BS EN ISO 17233, 2017 Edition, Leather. Physical aand mechanical tests. Determination of cold crack temperature of surface coatings
• BS EN ISO 20137, 2017 Edition, Leather. Chemical tests. Guidelines for testing critical chemicals in leather
• BS EN ISO 23910, 2017 Edition, Leather. Physical and mechanical tests. Measurement of stitch tear resistance
• ISO 2418, 3rd Edition, Leather - Chemical, physical and mechanical and fastness tests - Sampling location
• ISO 2420, 3rd Edition, Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area
• ISO 4044, 3rd Edition, Leather - Chemical tests - Preparation of chemical test samples
• ISO 5402-1, 2nd Edition, Leather - Determination of flex resistance - Part 1: Flexometer method
• ISO 17075-1, 1st Edition, Leather - Chemical determination of chromium(VI) content in leather - Part 1: Colorimetric method
• ISO 17075-2, 1st Edition, Leather - Chemical determination of chromium(VI) content in leather - Part 2: Chromatographic method
• ISO 17232, 2nd Edition, Leather - Physical and mechanical tests - Determination of heat resistance of patent leather
• ISO 17233, 2nd Edition,Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings
• ISO 20136, 1st Edition, Leather - Determination of degradability by micro-organisms
• ISO 20137, 1st Edition, Leather - Chemical tests - Guidelines for testing critical chemicals in leather
• ISO 23910, 2nd Edition, Leather - Physical and mechanical tests - Measurement of stitch tear resistance

For more standards like these, please refer to our Document Center List of Standards on Leather and Furs.

New Industrial Process Measurement And Control Standards for the 1st Quarter 2017

Document Center, Inc. is pleased to announce that the following Standards on Industrial Process Measurement and Control are now available;

• BS EN 61003-1, 2016 Edition, Industrial-process control systems. Instruments with analogue inputs and two- or multi-position outputs. Methods for evaluating performance
• BS EN 61003-2, 2016 Edition, Industrial-process control systems. Instruments with analogue inputs and two- or multi-position outputs. Guidance for inspection and routine testing
• BS EN 61360-6, 2017 Edition, Standard data element types with associated classification scheme for electric components. IEC Common Data Dictionary (IEC CDD) quality guidelines
• BS EN 61557-9, 2015 Edition, Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Equipment for insulation fault location in IT systems
• BS EN 61784-3-18, 2011 Edition with Amendment 1, Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF 18
• BS EN 61987-15, 2017 Edition, Industrial-process measurement and control. Data structures and elements in process equipment catalogues. Lists of properties (LOPs) for level measuring equipment for electronic data exchange
• BS EN 62424, 2016 Edition, Representation of process control engineering. Requests in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools
• BS ISO 16739, 2016 Edition, Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries
• IEC 61010-2-201, Edition 2.0, Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment
• IEC 61010-2-201-RL, Edition 2.0 Redline Version, Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment
• IEC 61557-9, Edition 3.0,Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems
• IEC 62453-62, Edition 1.0, Field device tool (FDT) interface specification - Part 62: Field device tool (FDT) styleguide for common language infrastructure

For more standards like these, please refer to our Document Center list of Standards on Industrial Process Measurement and Control.

New Ignitability And Burning Behaviour Of Materials And Products Standards for the 1st Quarter 2017

Document Center, Inc. is pleased to announce that the following Standards on Ignitability and Burning Behavior of Materials and Products are now available;

• ASTM D92, 2016B Edition,  Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
• ASTM E662, 2017 Edition, Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials 
• ASTM E1537, 2016 Edition, Standard Test Method for Fire Testing of Upholstered Furniture
• ASTM E1590, 2017 Edition, Standard Test Method for Fire Testing of Mattresses
• ASTM E1725, 2014 Edition with Editorial Correction, Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
• ASTM E2748, 2012A Edition Reapproved in 2017, Standard Guide for Fire-Resistance Experiments  
• ASTM F1959, 2014 Edition with Editorial Correction, Standard Test Method for Determining the Arc Rating of Materials for Clothing
• BS EN 60695-1-10, 2017 Edition, Fire hazard testing. Guidance for assessing the fire hazard of electrotechnical products. General guidelines
• BS EN 60695-8-1, 2017 Edition, Fire hazard testing. Heat release. General guidance
• BS EN 60695-8-2, 2017 Edition, Fire hazard testing. Heat release. Summary and relevance of test methods
• BS ISO 12992, 2017 Edition, Plastics. Vertical flame spread determination for film and sheet
• IEC 60695-1-30, Edition 3.0, Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines
• ISO 12992, 2nd Edition, Plastics - Vertical flame spread determination for film and sheet

For more standards like these, please refer to our Document Center List of Standards on Ignitability and Burning Behavior of Materials and Products.

New Lubricants, Industrial Oils, and Related Products Standards for the 1st Quarter 2017

Document Center, Inc. is pleased to announce that the following Standards on Lubricants, Industrial Oils, and Related Products are now available;

• ASTM D2509, 2014 Edition with Editorial Correction, Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)
• ASTM D2595, Withdrawn Without Replacement, Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range 
• ASTM D2983, 2016 Edition, Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
• ASTM D4048, 2016 Edition, Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
• ASTM D4049, 2016 Edition, Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray
• ASTM D4170, 2016 Edition, Standard Test Method for Fretting Wear Protection by Lubricating Greases
• ASTM D4175, 2017 Edition, Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
• ASTM D4485, 2016 Edition, Standard Specification for Performance of Active API Service Category Engine Oils
• ASTM D4628, 2016 Edition, Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
• ASTM D4683, 2017 Edition, Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150°C
• ASTM D4741, 2017 Edition, Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
• ASTM D5706, 2016 Edition, Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
• ASTM D5707, 2016 Edition, Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
• ASTM D6139, 2017 Edition, Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask
• ASTM D7217, 2016 Edition, Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
• ASTM D7421, 2016 Edition, Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine
• ASTM D7594, 2016 Edition, Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
• ASTM D7751, 2016 Edition, Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
• ASTM D8048, 2016A Edition, Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine
• DIN 51396-1, Withdrawn Without Replacement, Testing of lubricants - Determination of wear elements - Part 1: Direct Determination by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES)
• DIN EN ISO 2719, 2016 Edition, Determination of flash point - Pensky-Martens closed cup method

For more standards like these, please refer to our Document Center List of Standards on Lubricants, Industrial Oils, and Related Products.

New Non-Destructive Testing Standards for the 1st Quarter 2017

Document Center, Inc. is pleased to announce that the following Standards on Non-Destructive Testing are now available;

• ASTM E1316, 2017 Edition, Standard Terminology for Nondestructive Examinations
• BS EN 1330-4, Withdrawn and Replaced by BS EN ISO 5577, Non-destructive testing. Terminology. Terms used in ultrasonic testing
• BS EN ISO 5577, 2017 Edition, Non-destructive testing. Ultrasonic testing. Vocabulary
• BS EN ISO 16946, 2017 Edition, Non-destructive testing. Ultrasonic testing. Specification for step wedge calibration block
• BS ISO 10880, 2017 Edition, Non-destructive testing. Infrared thermographic testing. General principles
• BS ISO 15708-1, 2017 Edition, Non-destructive testing. Radiation methods for computed tomography. Terminology
• BS ISO 15708-2, 2017 Edition, Non-destructive testing. Radiation methods for computed tomography. Principles, equipment and samples
• BS ISO 15708-3, 2017 Edition, Non-destructive testing. Radiation methods for computed tomography. Operation and interpretation
• BS ISO 15708-4, 2017 Edition, Non-destructive testing. Radiation methods for computed tomography. Qualification
• BS ISO 18251-1, 2017 Edition, Non-destructive testing. Infrared thermography. Characteristics of system and equipment
• BS ISO 19675, 2017 Edition, Non-destructive testing. Ultrasonic testing. Specification for a calibration block for phased array testing (PAUT)
• BS ISO 20669, 2017 Edition, Non-destructive testing. Pulsed eddy current testing of ferromagnetic metallic components
• ISO 5577, 2nd Edition, Non-destructive testing - Ultrasonic testing - Vocabulary
• ISO 10880, 1st Edition, Non-destructive testing - Infrared thermographic testing - General principles
• ISO 15708-1, 2nd Edition, Non-destructive testing - Radiation methods for computed tomography - Part 1: Terminology
• ISO 15708-2, 2nd Edition, Non-destructive testing - Radiation methods for computed tomography - Part 2: Principles, equipment and samples
• ISO 15708-3, 1st Edition, Non-destructive testing - Radiation methods for computed tomography - Part 3: Operation and interpretation
• ISO 15708-4, 1st Edition, Non-destructive testing - Radiation methods for computed tomography - Part 4: Qualification
• ISO 16946, 2nd Edition, Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
• ISO 18251-1, 1st Edition, Non-destructive testing - Infrared thermography - Part 1: Characteristics of system and equipment
• ISO 19675, 1st Edition, Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT)
• ISO 20339, 1st Edition, Non-destructive testing - Equipment for eddy current examination - Array probe characteristics and verification
• ISO 20669, 1st Edition, Non-destructive testing - Pulsed eddy current testing of ferromagnetic metallic components

For more standards like these, please refer to our Document Center List of Standards on Non-Destructive Testing.

New Nanotechnologies Standards for the 1st Quarter 2017

Document Center, Inc. is pleased to announce that the following Standards on Nanotechnologies are now available:

• IEC 62607-3-2, Edition 1.0, Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion
• IEC 62607-4-5, Edition 1.0, Nanomanufacturing - Key control characteristics - Part 4-5: Cathode nanomaterials for nano-enabled electrical energy storage - Electrochemical characterization, 3-electrode cell method
• IEC 80004-9, Edition 1.0, Nanotechnologies - Vocabulary - Part 9: Nano-enabled electrotechnical products and systems
• ISO 19590, 1st Edition, Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry

For more standards like these, please refer to our Document Center List of Standards on Nanotechnologies.

New Solar Energy Engineering Standards for the 1st Quarter 2017

Document Center, Inc. is pleased to announce that the following Standards on Solar Energy Engineering are now available;

• BS EN 12976-1, 2017 Edition, Thermal solar systems and components. Factory made systems. General requirements
• BS EN 12976-2, 2017 Edition, Thermal solar systems and components. Factory made systems. Test methods
• BS EN 61215-1, 2016 Edition, Terrestrial photovoltaic (PV) modules. Design qualification and type approval. Test requirements
• BS EN 61215-2, 2017 Edition, Terrestrial photovoltaic (PV) modules. Design qualification and type approval. Test procedures
• BS EN 61853-2, 2016 Edition, Photovoltaic (PV) module performance testing and energy rating. Spectral responsivity, incidence angle and module operating temperature measurements
• BS EN 62108, 2016 Edition, Concentrator photovoltaic (CPV) modules and assemblies. Design qualification and type approval
• BS EN 62788-1-4, 2016 Edition, Measurement procedures for materials used in photovoltaic modules. Encapsulants. Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
• IEC 61724-1, Edition 1.0, Photovoltaic system performance - Part 1: Monitoring
• IEC 62670-3, Edition 1.0, Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating
• IEC 62788-1-6, Edition 1.0, Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate

For more standards like these, please refer to our Document Center List of Standards on Solar Energy Engineering.

New FDA Medical Device Guidance Documents for the 4th Quarter 2016

Document Center, Inc. is pleased to announce that the following New FDA Medical Device Guidance Documents are now available;

• Current Good Manufacturing Practice Requirements for Combination Products: Guidance for Industry and FDA Staff
• Factors to Consider When Making Benefit-Risk Determinations for Medical Device Investigational Device Exemptions - Guidance for Investigational Device Exemption Sponsors, Sponsor-Investigators and Food and Drug Administration Staff
• Medical Device Accessories - Describing Accessories and Classification Pathway for New Accessory Types - Guidance for Industry and Food and Drug Administration Staff
• Postmarket Management of Cybersecurity in Medical Devices - Guidance for Industry and Food and Drug Administration Staff
• Public Notification of Emerging Postmarket Medical Device Signals (Emerging Signals) - Guidance for Industry and Food and Drug Administration Staff
• Immediately in Effect Guidance Document: Conditions for Sale for Air-Conduction Hearing Aids - Guidance for Industry and Food and Drug Administration Staff 
• Mitigating the Risk of Cross-Contamination from Valves and Accessories Used for Irrigation Through Flexible Gastrointestinal Endoscopes - Guidance for Industry and Food and Drug Administration Staff 
• Submission of Premarket Notifications for Magnetic Resonance Diagnostic Devices - Guidance for Industry and Food and Drug Administration Staff
• Medical Device Reporting for Manufacturers - Guidance for Industry and Food and Drug Administration Staff
• Clinical Considerations for Investigational Device Exemptions (IDEs) for Neurological Devices Targeting Disease Progression and Clinical Outcomes - Guidance for Industry and Food and Drug Administration Staff 
• Labeling for Permanent Hysteroscopically-Placed Tubal Implants Intended for Sterilization - Guidance for Industry and Food and Drug Administration Staff
• Collection of Race and Ethnicity Data in Clinical Trials - Guidance for Industry and FDA Staff
• Self-Monitoring Blood Glucose Test Systems for Over-the-Counter Use - Guidance for Industry and Food and Drug Administration Staff 
• Blood Glucose Monitoring Test Systems for Prescription Point-of-Care Use - Guidance for Industry and Food and Drug Administration Staff 
• Premarket Notification (510(k)) Submissions for Bone Anchors - Draft Guidance for Industry and Food and Drug Administration Staff
• Product Labeling for Certain Ultrasonic Surgical Aspirator Devices - Draft Guidance for Industry and Food and Drug Administration Staff
• Software as a Medical Device (SaMD): Clinical Evaluation - Draft Guidance 

Want to know more about other recently released FDA Medical Device Guidance Documents?  Please see my previous blog posts:

New FDA Guidance Documents for the 2nd Quarter 2016

New FDA Guidance Documents for the 1st Quarter 2016