Document Center, Inc. is pleased to announce that the following Standards on Medicaments are now available;
- BS ISO 18668-2, 2017 Edition, Traditional Chinese medicine. Coding system for Chinese medicines. Codes for decoction pieces
- BS ISO 18668-3, 2017 Edition, Traditional Chinese medicine. Coding system for Chinese medicines. Codes for Chinese Materia Medicaments
- BS ISO 18668-4, 2017 Edition, Traditional Chinese medicine. Coding system for Chinese medicines. Codes for granule forms of individual medicinals for prescriptions
- ISO 18668-2, 1st Edition, Traditional Chinese medicine - Coding system for Chinese medicines - Part 2: Codes for decoction pieces
- ISO 18668-3, 1st Edition, Traditional Chinese medicine - Coding system for Chinese medicines - Part 3: Codes for Chinese Materia Medica
- ISO 18668-4, 1st Edition, Traditional Chinese medicine - Coding system for Chinese medicines - Part 4: Codes for granule forms of individual medicinals for prescriptions
For more standards like these, please refer to our Document Center List of Standards on Medicaments.
Document Center, Inc. is pleased to announce that the following Standards on Emission are now available;
- BS EN 55025, 2017 Edition, Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of on-board receivers
- CISPR 16-1-4-2, Amendment 2 for Edition 3.0, Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements
- CISPR 16-1-6-AM1, Amendment 1 for Edition 1.0, Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration
- IEC 62370-AM1, Amendment 1 for Edition 1.0, Amendment 1 - Electroacoustics - Instruments for the measurement of sound intensity - Electromagnetic and electrostatic compatibility requirements and test procedures
- IEC 62433-2, Edition 2.0, EMC IC modelling - Part 2: Models of integrated circuits for EMI behavioural simulation - Conducted emissions modelling (ICEM-CE)
- IEC 62433-3, Edition 1.0, EMC IC modelling - Part 3: Models of integrated circuits for EMI behavioural simulation - Radiated emissions modelling (ICEM-RE)
For more standards like these, please refer to our Document Center List of Standards on Emission.
Document Center, Inc. is pleased to announce that the following Standards on Explosives, Pyrotechnics, and Fireworks are now available;
- ISO 25947-1, 1st Edition, Fireworks - Categories 1, 2 and 3 - Part 1: Terminology
- ISO 25947-2, 1st Edition, Fireworks - Categories 1, 2 and 3 - Part 2: Categories and types
- ISO 25947-3, 1st Edition, Fireworks - Categories 1, 2 and 3 - Part 3: Minimum labelling requirements
- ISO 25947-4, 1st Edition, Fireworks - Categories 1, 2 and 3 - Part 4: Test methods
- ISO 25947-5, 1st Edition, Fireworks - Categories 1, 2 and 3 - Part 5: Requirements for construction and performance
- ISO 26261-1, 1st Edition, Fireworks - Category 4 - Part 1: Terminology
- ISO 26261-2, 1st Edition, Fireworks - Category 4 - Part 2: Requirements
- ISO 26261-3, 1st Edition, Fireworks - Category 4 - Part 3: Test methods
- ISO 26261-4, 1st Edition, Fireworks - Category 4 - Part 4: Minimum labelling requirements and instructions for use
For more standards like these, please refer to our Document Center List of Standards on Explosives, Pyrotechnics, and Fireworks.
Document Center, Inc. is pleased to announce that the following Standards on Clothes are now available;
- ASTM D4235, Withdrawn Without Replacement, Standard Performance Specification for Women's and Girls' Knitted Blouse and Dress Fabrics
- ASTM F1959, 2014 Edition with Editorial Correction, Standard Test Method for Determining the Arc Rating of Materials for Clothing
- BS ISO 8559-1, 2017 Edition, Size designation of clothes. Anthropometric definitions for body measurement
- BS ISO 8559-2, 2017 Edition, Size designation of clothes. Primary and secondary dimension indicators
- ISO 3636, Withdrawn and Replaced by ISO 8559-2, Size designation of clothes - Mens and boys' outerwear garments
- ISO 3637, Withdrawn and Replaced by ISO 8559-2, Size designation of clothes -- Womens and girls' outerwear garments'
- ISO 3638, Withdrawn and Replaced by ISO 8559-2, Size designation of clothes - Infants' garments
- ISO 4415, Withdrawn and Replaced by ISO 8559-2, Size designation of clothes -- Mens and boys' underwear
- ISO 4418, Withdrawn and Replaced by ISO 8559-2, Size designation of clothes - Gloves
For more standards like these, please refer to our Document Center List of Standards on Clothes.
Document Center, Inc. is pleased to announce that the following Standards on Fiber Optic Interconnecting Devices are now available;
- BS EN 61753-052-3, 2016 Edition, Fibre optic interconnecting devices and passive components. Performance standard. Single-mode fibre non-connectorized fixed attenuator. Category U in uncontrolled environment
- BS EN 61753-052-6, 2016 Edition, Fibre optic interconnecting devices and passive components. Performance standard. Single-mode fibre non-connectorized fixed attenuator. Category O in outside plant environment
- BS EN 61754-32, 2016 Edition, Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Type DiaLink connector family
- BS EN 61754-34, 2016 Edition, Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Type URM connector family
- IEC 61300-2-9, Edition 3.0, Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock
- IEC 61300-2-55, Edition 1.0, Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-55: Tests - Strength of mounted adaptor
- IEC 62343-6-6, Edition 2.0, Dynamic modules - Part 6-6: Design guide - Failure mode effect analysis for optical units of dynamic modules
For more standards like these, please refer to our Document Center List of Standards on Fiber Optic Interconnecting Devices.
Document Center, Inc. is pleased to announce that the following Standards on Earth-Moving Machinery are now available;
- BS 6912-1, Withdrawn and Replaced by BS ISO 8643, Safety of earth-moving machinery. Specification for hydraulic excavator and backhoe loader boom lowering control device
- BS 6913-9, Withdrawn and Replaced by BS ISO 6405-2, Operation and maintenance of earth-moving machinery. Specification for specific symbols for machines, equipment and accessories
- BS ISO 6405-1, 2017 Edition, Earth-moving machinery. Symbols for operator controls and other displays. Common symbols
- BS ISO 6405-2, 2017 Edition, Earth-moving machinery. Symbols for operator controls and other displays. Symbols for specific machines, equipment and accessories
- BS ISO 8643, 2017 Edition, Earth-moving machinery. Hydraulic excavator and backhoe loader lowering control device. Requirements and tests
- BS ISO 14990-1, 2016 Edition, Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems. General requirements
- BS ISO 14990-2, Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems. Particular requirements for externally-powered machines
- BS ISO 14990-3, 2016 Edition, Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems. Particular requirements for self-powered machines
- ISO 6405-1, 3rd Edition, Earth-moving machinery - Symbols for operator controls and other displays - Part 1: Common symbols
- ISO 6405-2, 2nd Edition, Earth-moving machinery - Symbols for operator controls and other displays - Part 2: Symbols for specific machines, equipment and accessories
- ISO 8643, 3rd Edition, Earth-moving machinery - Hydraulic excavator and backhoe loader lowering control device - Requirements and tests
- ISO 15818, 1st Edition, Earth-moving machinery - Lifting and tying-down attachment points - Performance requirements
Document Center, Inc. is pleased to announce that the following Standards on Medical Diagnostic Equipment are now available;
- BS EN 61010-2-101, Edition 2.0, Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
- ISO 13154, 2nd Edition, Medical electrical equipment - Deployment, implementation and operational guidelines for identifying febrile humans using a screening thermograph
- ISO 80601-2-56, 2nd Edition, Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement
- SS EN ISO 11073-10441, 2017 Edition, Health informatics - Personal health device communication - Part 10441: Device specialization - Cardiovascular fitness and activity monitor
For more standards like these, please refer to our Document Center List of Standards on Medical Diagnostic Equipment.
Document Center, Inc. is pleased to announce that the following Standards on Indoor Sports Equipment are now available;
- ASTM F3022, 2016 Edition, Standard Test Method for Evaluating the Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments
- BS EN 957-5, Withdrawn and Replaced by BS EN ISO 20957-5, Stationary training equipment. Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods
- BS EN ISO 20957-5, 2016 Edition, Stationary training equipment. Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods
- DIN EN 957-4, Withdrawn and Replaced by DIN EN ISO 20957-4, Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods
For more standards like these, please refer to our Document Center List of Standards on Indoor Sports Equipment.
Document Center, Inc. is pleased to announce that the following Standards on Binders and Sealing Materials are now available;
- ASTM C717, 2017 Edition, Standard Terminology of Building Seals and Sealants
- ASTM C732, 2017 Edition, Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
- ASTM C793, 2005 Edition Reapproved in 2017, Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
- ASTM C834, 2017 Edition, Standard Specification for Latex Sealants
- ASTM C877, 2016 Edition, Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
- ASTM C1266, 2017 Edition, Standard Test Method for Flow Characteristics of Preformed Tape Sealants
- ASTM C1481, 2012 Edition Reapproved in 2017, Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
- ASTM C1589, 2017A Edition, Standard Practice for Outdoor Weathering of Construction Seals and Sealants
- ASTM C17353, 2017 Edition, Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
- ASTM D2493, 2016 Edition, Standard Practice for Viscosity-Temperature Chart for Asphalt Binders
- ASTM D3019, 2017 Edition, Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non-Fibered, and Fibered
- ASTM D3105, 2017 Edition, Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
- ASTM D3289, 2017 Edition, Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)
- ASTM D3617, 2017 Edition, Standard Practice for Sampling and Analysis of Built-Up Roof Systems During Application
- ASTM D4068, 2017 Edition, Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane
- ASTM D4957, Withdrawn Without Replacement, Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Bitumens by Vacuum Capillary Viscometer
- ASTM D7643, 2016 Edition, Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders
- BS EN 14891, 2017 Edition, Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, evaluation of conformity, classification and designation
- BS EN 15651-1, 2017 Edition, Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for facade elements
- BS EN 15651-2, 2017 Edition, Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for glazing
- BS EN 15651-3, 2017 Edition, Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for sanitary joints
- BS EN 15651-4, 2017 Edition, Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for pedestrian walkways
- BS EN 15651-5, 2017 Edition, Sealants for non-structural use in joints in buildings and pedestrian walkways. Assessment and verification of constancy of performance, marking and labelling
- DIN EN 13075-1, 2017 Edition, Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method
- DIN EN 13075-2, 2017 Edition, Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions
- DIN EN 13587, 2016 Edition, Bitumen and bituminous binders. Determination of the tensile properties of bituminous binders by the tensile test method
- DIN EN 13703, Withdrawn and Replaced by DIN EN 13587, Bitumen and bituminous binders - Determination of deformation energy
- DIN EN 13719, 2016 Edition, Geosynthetics. Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers
Document Center, Inc. is pleased to announce that the following Standards on IT Applications in Health Care Technology are now available;
- BS EN ISO 21298, 2017 Edition, Health informatics. Functional and structural roles
- BS EN ISO 25237, 2017 Edition, Health informatics. Pseudonymization
- BS IEC 82304-1, 2016 Edition, Health software. General requirements for product safety
- DIN EN ISO 15225, 2016 Edition, Medical devices - Quality management - Medical device nomenclature data structure
- IEC 80001-2-9, Edition 1.0, Application of risk management for IT-networks incorporating medical devices - Part 2-9: Application guidance - Guidance for use of security assurance cases to demonstrate confidence in IEC TR 80001-2-2 security capabilities
- ISO 21298, 1st Edition, Health informatics - Functional and structural roles
- ISO 25237, 1st Edition, Health informatics - Pseudonymization
Document Center, Inc. is pleased to announce that the following Standards on Conduits for Electrical Purposes are now available;
- IEC 61084-1, Edition 2.0, Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements
- IEC 61084-2-1, Edition 2.0, Cable trunking systems and cable ducting systems for electrical installations - Part 2-1: Particular requirements - Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings
- IEC 61084-2-2, Edition 2.0, Cable trunking systems and cable ducting systems for electrical installations - Part 2-2: Particular requirements - Cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor
- IEC 61084-2-3, Edition 1.0, Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements - Slotted cable trunking systems intended for installation in cabinets
- IEC 61084-2-4, Edition 2.0, Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements - Service poles and service posts
Document Center, Inc. is pleased to announce that the following Standards on Medical Equipment in General are now available;
- BS EN 80601-2-35, 2009 Edition with Amendment 1, Medical electrical equipment. Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use
- BS EN ISO 13485, 2016 Edition with Corrigendum 2, Medical devices. Quality management systems. Requirements for regulatory purposes
- IEC 80001-2-9, Edition 1.0, Application of risk management for IT-networks incorporating medical devices - Part 2-9: Application guidance - Guidance for use of security assurance cases to demonstrate confidence in IEC TR 80001-2-2 security capabilities
- SIS EN ISO 13485, Corrigendum 1 for 2016 Edition, Medical devices - Quality management systems - Requirements for regulatory purposes
For more standards like these, please refer to our Document Center List of Standards on Medical Equipment in General.
Document Center, Inc. is pleased to announce that the following Standards on Aerospace Electric Equipment and Systems are now available;
- BS EN 2713-012, 2017 Edition, Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55 °C and 200 °C. MNA (1 core), MNB (pair), MNC (3 cores), MND (4 cores), cables family. Silver plated copper screened (spiral) and jacketed, UV laser printable. Product standard
- BS EN 2714-002, 2017 Edition, Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between - 55 °C and 260 °C. Screened and jacketed. General
- BS EN 3646-005, 2017 Edition, Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous. Receptacle, hermetic, square flange mounting. Product standard
- BS EN 3745-510, 2017 Edition, Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Bending test
- BS EN 4008-003, 2017 Edition, Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Positioner for crimping tool M22520/2-01. Product standard
- BS EN 4165-024, 2017 Edition, Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous. Single module plug. Product standard
- BS EN 4165-025, 2017 Edition, Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous. Single module receptacle. Product standard
- BS EN 4531-001, 2017 Edition, Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts. Technical specification
- BS EN 4604-009, 2017 Edition, Aerospace series. Cable, electrical, for signal transmission. Cable, coaxial, light weight, 50 ohms, 180 °C, type KW (light WN). Product standard
- BS EN 4644-002, 2016 Edition, Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous. Specification of performance and contact arrangements
- BS EN 4644-142, 2016 Edition, Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous. Size 4 receptacle for rack and panel application, class C and D. Product standard
- BS EN 4674-001, 2017 Edition, Aerospace series. Electrical cables, installation. Self-wrapping shielding (EMI) protective sleeve. Technical specification
- BS EN 4708-101, 2017 Edition, Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification. Polyolefin sleeving. Operating temperatures -55 °C to 135 °C. Product standard
- BS EN 6059-202, 2016 Edition, Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Dimensions and mass
- BS EN 50389, Withdrawn and Replaced by BS EN 16602-70-30, Space product assurance. Wire-wrapping of high reliability electrical connections
- IEC 62239-2, Edition 1.0, Process management for avionics - Management plan - Part 2: Preparation and maintenance of an electronic COTS assembly management plan
Document Center, Inc. is pleased to announce that the following Standards on Organic Coatings are now available;
- ASTM A1055, 2016 Edition, Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
- ASTM D968, 2016 Edition, Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
- ASTM D2197, 2016 Edition, Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
- ASTM D3003, 2001 R16 Edition, Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
- ASTM D4828, 1994 Edition Reapproved in 2016, Standard Test Methods for Practical Washability of Organic Coatings
- ASTM D5178, 2016 Edition, Standard Test Method for Mar Resistance of Organic Coatings
- BS 6496, Withdrawn and Replaced by BS EN 12206-1, Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with powder organic coatings
- BS EN 13523-1, 2017 Edition, Coil coated metals. Test methods. Film thickness
- BS EN 13523-10, 2017 Edition, Coil coated metals. Test methods. Resistance to fluorescent UV radiation and water condensation
- BS EN 13523-12, 2017 Edition, Coil coated metals. Test methods. Resistance to scratching
- BS EN 13523-22, 2017 Edition, Coil coated metals. Test methods. Colour difference. Visual comparison
- BS EN 13523-29, 2017 Edition, Coil coated metals. Test methods. Resistance to environmental soiling (Dirt pick-up and striping)
For more standards like these, please refer to our Document Center List of Standards on Organic Coatings.
Document Center, Inc. is pleased to announce that the following Standards on Alkaline Secondary Cells and Batteries are now available;
- IEC 61951-1, Edition 4.0, Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-Cadmium
- IEC 61951-2, Edition 4.0, Secondary cells and batteries containing alkaline or other non acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride
- IEC 62133, Withdrawn and Replaced by IEC 62133-1 and IEC 62133-2, Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
- IEC 62133-1, Edition 1.0, Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 1: Nickel systems
- IEC 62133-2, Edition 1.0, Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary lithium cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems
- IEC 62619, Edition 1.0, Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications
For more standards like these, please refer to our Document Center List of Standards on Alkaline Secondary Cells and Batteries.
Document Center, Inc. is pleased to announce that the following Standards on Sterilized Packaging are now available;
- BS EN 868-2, 2017 Edition, Packaging for terminally sterilized medical devices. Sterilization wrap. Requirements and test methods
- BS EN 868-3, 2017 Edition, Packaging for terminally sterilized medical devices. Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5). Requirements and test methods
- BS EN 868-4, 2017 Edition, Packaging for terminally sterilized medical devices. Paper bags. Requirements and test methods.
- BS EN 868-6, 2017 Edition, Packaging for terminally sterilized medical devices. Paper for low temperature sterilization processes. Requirements and test methods
- BS EN 868-7, 2017 Edition, Packaging for terminally sterilized medical devices. Adhesive coated paper for low temperature sterilization processes. Requirements and test methods
For more standards like these, please refer to our Document Center List of Standards on Sterilized Packaging.
Document Center, Inc. is pleased to announce that the following Standards on Sports Facilities are now available;
- ASTM F2461, 2016 Edition with Editorial Correction, Standard Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment
- BS EN 12572-1, 2017 Edition, Artificial climbing structures. Safety requirements and test methods for ACS with protection points
- BS EN 12572-2, 2017 Edition, Artificial climbing structures. Safety requirements and test methods for bouldering walls
- BS EN 12572-3, 2017 Edition, Artificial climbing structures. Safety requirements and test methods for climbing holds
- BS EN 13865, 2017 Edition, Surfaces for sports areas. Determination of angled ball behaviour. Tennis
- BS EN 16899, 2016 Edition, Sports and recreational equipment. Parkour equipment. Safety requirements and test methods
- BS EN 16927, 2017 Edition, Mini-pools. Specific requirements including safety and test methods for mini-pools
For more standards like these, please refer to our Document Center List of Standards on Sports Facilities.
Document Center, Inc. is pleased to announce that the following Standards on Measurement of Volume, Mass, Density, and Viscosity are now available;
- ASTM C1005, 2017 Edition, Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
- ASTM D445, 2017 Edition,
Standard Test Method for Kinematic Viscosity of Transparent and Opaque
Liquids (and Calculation of Dynamic Viscosity)
- ASTM D4052, 2016 Edition, Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
- ASTM D6606, 2000 Edition Reapproved in 2017, Standard Test Method for Viscosity and Yield of Vehicles and Varnishes by the Duke Viscometer
- ASTM D6616, 2017 Edition, Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100°C
- ASTM D7394, 2017 Edition, Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers
- ASTM D7961, 2017 Edition, Standard Practice for Calibrating U-tube Density Cells over Large Ranges of Temperature and Pressure
- ASTM E2975, 2016 Edition, Standard Test Method for Calibration or Calibration Verification of Concentric Cylinder Rotational Viscometers
For more standards like these, please refer to our Document Center List of Standards on Measurement of Volume, Mass, Density, and Viscosity.
Document Center, Inc. is pleased to announce that the following Standards on Flat Steel Products and Semi-Products are now available;
- ASTM A480, 2016B Edition, Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
- ASTM A623, 2016 Edition, Standard Specification for Tin Mill Products, General Requirements
- ASTM A879, 2012 Edition Reapproved in 2017, Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
- ASTM A929, Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
- ASTM A1046, 2017 Edition, Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
- ASTM A1063, 2017 Edition, Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
- ASTM A1079, 2017 Edition, Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
- BS EN 10152, 2017 Edition, Electrolytically zinc coated cold rolled steel flat products for cold forming. Technical delivery conditions
For more standards like these, please refer to our Document Center List of Standards on Flat Steel Products and Semi-Products.
Document Center, Inc. is pleased to announce that the following Standards on Implants for Surgery, Prosthetics, and Orthotics are now available;
- ASTM F451, 2016 Edition,Standard Specification for Acrylic Bone Cement
- ASTM F1058, 2016 Edition, Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008)
- ASTM F1264, 2016 Edition with Editorial Correction, Standard Specification and Test Methods for Intramedullary Fixation Devices
- ASTM F1635, 2016 Edition, Standard Test Method for in vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants
- ASTM F2129, 2017 Edition, Standard Test Method for in vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants
- ASTM F2183, Withdrawn Without Replacement, Standard Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants
- ASTM F2694, 2016 Edition, Standard Practice for Functional and Wear Evaluation of Motion-Preserving Lumbar Total Facet Prostheses
- ASTM F2902, 2016 Edition,Standard Guide for Assessment of Absorbable Polymeric Implants
- BS EN 12006-2, Withdrawn and Replaced by BS EN ISO 7198, Non active surgical implants. Particular requirements for cardiac and vascular implants. Vascular prostheses including cardiac valve conduits
- BS EN 50527-1, 2016 Edition, Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices. General
- BS EN 50527-2-1, 2016 Edition, Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices. Specific assessment for workers with cardiac pacemakers
- BS EN ISO 7198, 2017 Edition, Cardiovascular implants and extracorporeal systems. Vascular prostheses. Tubular vascular grafts and vascular patches
- BS EN ISO 7199, 2017 Edition, Cardiovascular implants and artificial organs. Blood-gas exchangers (oxygenators)
- BS EN ISO 21535, 2009 Edition with Amendment 1, Non-active surgical implants. Joint replacement implants. Specific requirements for hip-joint replacement implants
- BS EN ISO 25539-1, 2017 Edition, Cardiovascular implants. Endovascular devices. Endovascular prostheses
- BS ISO 7198, Withdrawn and Replaced by BS EN ISO 7198,
- ISO 25539-1, 2nd Edition, Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses
For more standards like these, please refer to our Document Center List of Standards on Implants for Surgery, Prosthetics, and Orthotics.
