Document Center, Inc. is pleased to announce that the following Standards on Mechanical Testing of Metals are now available;
- ASTM E1820, 2016 Edition, Standard Test Method for Measurement of Fracture Toughness
- ASTM E740, 2003 Edition Reapproved in 2016, Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
- ASTM G196, 2008 Edition Reapproved in 2016, Standard Test Method for Galling Resistance of Material Couples
- BS EN 10319-1, 2003 Edition, Metallic materials. Tensile stress relaxation testing. Procedure for testing machines
- BS EN ISO 148-1, 2016 Edition, Metallic materials. Charpy pendulum impact test. Test method
- BS EN ISO 148-2, 2016 Edition, Metallic materials. Charpy pendulum impact test. Verification of testing machines
- BS EN ISO 148-3, 2016 Edition, Metallic materials. Charpy pendulum impact test. Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
- BS EN ISO 14577-4, 2016 Edition, Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
- BS ISO 27306, 2016 Edition, Metallic materials. Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
- ISO 148-1, 3rd Edition, Metallic materials - Charpy pendulum impact test - Part 1: Test method
- ISO 148-2, 3rd Edition, Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines
- ISO 148-3, 3rd Edition, Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
- ISO 3928, 3rd Edition, Sintered metal materials, excluding hardmetals - Fatigue test pieces
- ISO 12135, 2nd Edition, Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
- ISO 14577-4, 2nd Edition, Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
- SS EN ISO 6508-1, 2016 Edition, Metallic materials - Rockwell hardness test - Part 1: Test method
For more standards like these, please refer to our Document Center List of Standards on Mechanical Testing of Metals.
Document Center, Inc. is pleased to announce that the following Standards on Liquid Fuels are now available;
- ASTM D93, 2016A Edition, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
- ASTM D322, 1997 Edition Reapproved in 2016, Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation
- ASTM D396, 2016 Edition with Editorial Correction, Standard Specification for Fuel Oils
- ASTM D910, 2016A Edition, Standard Specification for Leaded Aviation Gasolines
- ASTM D975, 2016A Edition, Standard Specification for Diesel Fuel Oils
- ASTM D1655, 2016C Edition, Standard Specification for Aviation Turbine Fuels
- ASTM D2789, 1995 Edition Reapproved in 2016, Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry
- ASTM D3227, 2016 Edition, Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
- ASTM D4814, 2016E Edition with Editorial Correction, Standard Specification for Automotive Spark-Ignition Engine Fuel
- ASTM D5501, 2012 Edition Reapproved in 2016, Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography
- ASTM D5845, 2001 Edition Reapproved in 2016, Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
- ASTM D6898, 2003 Edition Reapproved in 2016, Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig
- ASTM D6986, 2003 Edition Reapproved in 2016, Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
- ASTM D7111, 2016 Edition, Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
- ASTM D7170, 2016 Edition, Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method
- ASTM D7236, 2016A Edition, Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
- ASTM D7328, 2016 Edition, Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
- ASTM D7422, 2016A Edition, Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
- ASTM D7463, 2016 Edition with Editorial Correction, Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
- ASTM D7547, 2015 Edition with Editorial Correction, Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
- ASTM D7548, 2016A Edition, Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
- ASTM D7577, 2012 Edition Reapproved in 2016, Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends
- ASTM D7592, Withdrawn and Replaced by ASTM D7574, Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel
- ASTM D7753, 2012 Edition Reapproved in 2016, Standard Test Method for Hydrocarbon Types and Benzene in Light Petroleum Distillates by Gas Chromatography
- ASTM D7797, 2016A Edition, Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy - Rapid Screening Method
- BS EN 590, 2013 Edition, Automotive fuels. Diesel. Requirements and test methods
- BS EN 16734, 2016 Edition, Automotive fuels. Automotive B10 diesel fuel. Requirements and test methods
- BS EN 16896, 2016 Edition, Petroleum products and related products. Determination of kinematic viscosity. Method by Stabinger type viscosimeter
For more standards like these, please refer to our Document Center List of Standards of Liquid Fuels.
Document Center, Inc. is pleased to announce that the following Standards on Wastes are now available;
- ASTM D4844, 2016 Edition, Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection
- ASTM D4978, 2016 Edition, Standard Test Methods for Screening of Reactive Sulfides in Waste
- ASTM D5210, Withdrawn Without Replacement, Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge
- ASTM D5468, Withdrawn Without Replacement, Standard Test Method for Gross Calorific and Ash Value of Waste Materials
- ASTM D5608, 2016 Edition, Standard Practices for Decontamination of Sampling and Non Sample Contacting Equipment Used at Low Level Radioactive Waste Sites
- ASTM D5681, 2016A Edition, Standard Terminology for Waste and Waste Management
- ASTM D6050, 2009 Edition Reapproved in 2016, Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
- ASTM D6340, Withdrawn Without Replacement, Standard Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment
- ASTM D6498, Withdrawn Without Replacement, Standard Guide for Household Hazardous Waste Training Outline for Household Hazardous Waste Collection Operations
For more standards like these, please refer to our Document Center List of Standards on Wastes.
Document Center, Inc. is pleased to announce that the following Standards on Miscellaneous Domestic And Commercial Equipment are now available;
- BS ISO 27668-1, 2016 Edition, Gel ink ball pens and refills. General use
- ISO 12756, 2nd Edition, Drawing and writing instruments - Ball point pens and roller ball pens - Vocabulary
- ISO 12757-1, 2nd Edition, Ball point pens and refills - Part 1: General use
- ISO 14145-1, 2nd Edition, Roller ball pens and refills - Part 1: General use
- ISO 27668-1, 2nd Edition, Gel ink ball pens and refills - Part 1: General use
Document Center, Inc. is pleased to announce that the following Standards on Protective Clothing are now available;
- ASTM E1549, 2013 Edition Reapproved in 2016, Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
- ASTM F1359, 2012 Edition, Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies
- ASTM F2668, 2016 Edition, Standard Practice for Determining the Physiological Responses of the Wearer to Protective Clothing Ensembles
- BS EN 367, Withdrawn and Replaced by BS EN ISO 9151, Protective clothing. Protection against heat and fire. Method for determining heat transmission on exposure to flame
- BS EN ISO 9151, 2016 Edition, Protective clothing against heat and flame. Determination of heat transmission on exposure to flame
- BS EN ISO 15025, 2016 Edition, Protective clothing. Protection against flame. Method of test for limited flame spread
- BS EN ISO 20471, 2013 Edition with Amendment 1, High visibility clothing. Test methods and requirements
- BS ISO 17493, 2016 Edition, Clothing and equipment for protection against heat. Test method for convective heat resistance using a hot air circulating oven
- ISO 9151, 2nd Edition, Protective clothing against heat and flame - Determination of heat transmission on exposure to flame
- ISO 15025, 2nd Edition, Protective clothing - Protection against flame - Method of test for limited flame spread
- ISO 17493, 2nd Edition, Clothing and equipment for protection against heat - Test method for convective heat resistance using a hot air circulating oven
- ISO 20471-AM1, 1st Edition Amendment 1, High visibility clothing - Test methods and requirements
Document Center, Inc. is pleased to announce that the following Standards on Software are now available;
- BS EN ISO/IEC 30121, Corrigendum 1 for the 2016 Edition, Information technology. Governance of digital forensic risk framework
- BS ISO/IEC 29110-2-1, 2015 Edition, Software Engineering. Lifecycle profiles for Very Small Entities (VSEs). Framework and taxonomy
- BS ISO/IEC 29155-4, 2016 Edition, Systems and software engineering. Information technology project performance benchmarking framework. Guidance for data collection and maintenance
- BS ISO/IEC 30105-1, 2016 Edition, Information technology. IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes. Process reference model (PRM)
- BS ISO/IEC 30105-2, 2016 Edition, Information technology. IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes. Process assessment model (PAM)
- BS ISO/IEC 30105-3, 2016 Edition, Information technology. IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes. Measurement framework (MF) and organization maturity model (OMM)
- BS ISO/IEC 30105-4, 2016 Edition, Information technology. IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes. Terms and concepts
- BS ISO/IEC 30105-5, 2016 Edition, Information technology. IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes. Guidelines
- ISO/IEC/IEEE 29119-5, 1st Edition, Software and systems engineering - Software testing - Part 5: Keyword-Driven Testing
- ISO/IEC 24748-6, 1st Edition, Systems and software engineering - Life cycle management - Part 6: System integration engineering
- ISO/IEC 26557, 1st Edition, Software and systems engineering - Methods and tools for variability mechanisms in software and systems product line
- ISO/IEC 29110-3-3, 1st Edition, Systems and software engineering - Lifecycle profiles for Very Small Enterprises (VSEs) - Part 3-3: Certification requirements for conformity assessments of VSE profiles using process assessment and maturity models
- ISO/IEC 29155-4, 1st Edition, Systems and software engineering - Information technology project performance benchmarking framework - Part 4: Guidance for data collection and maintenance
- ISO/IEC 30105-1, 1st Edition, Information technology - IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes - Part 1: Process reference model (PRM)
- ISO/IEC 30105-2, 1st Edition, Information technology - IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes - Part 2: Process assessment model (PAM)
- ISO/IEC-30105-3, 1st Edition, Information technology - IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes - Part 3: Measurement framework (MF) and organization maturity model (OMM)
- ISO/IEC 30105-4, 1st Edition, Information technology - IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes - Part 4: Terms and concepts
- ISO/IEC 30105-5, 1st Edition, Information technology - IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes - Part 5: Guidelines
Document Center, Inc. is pleased to announce that the following Standards on Transfusion, Infusion, and Injection Equipment are now available;
- BS EN 80369-5, 2016 Edition, Small-bore connectors for liquids and gases in healthcare applications. Connectors for limb cuff inflation applications
- BS EN ISO 8536-13, 2016 Edition, Infusion equipment for medical use. Graduated flow regulators for single use with fluid contact
- BS EN ISO 8871-5, 2016 Edition, Elastomeric parts for parenterals and for devices for pharmaceutical use. Functional requirements and testing
- BS ISO 11418-1, 2016 Edition, Containers and accessories for pharmaceutical preparations. Drop-dispensing glass bottles
- BS ISO 11418-2, 2016 Edition, Containers and accessories for pharmaceutical preparations. Screw-neck glass bottles for syrups
- BS ISO 11418-3, 2016 Edition, Containers and accessories for pharmaceutical preparations. Screw-neck glass bottles (veral) for solid and liquid dosage forms
- ISO 1135-3, 2nd Edition, Transfusion equipment for medical use - Part 3: Blood-taking sets for single use
- ISO 8536-6, 3rd Edition, Infusion equipment for medical use - Part 6: Freeze drying closures for infusion bottles
- ISO 8536-13, 1st Edition, Infusion equipment for medical use - Part 13: Graduated flow regulators for single use with fluid contact
- ISO 8536-14, 1st Edition, Infusion equipment for medical use - Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact
- ISO 8871-5, 2nd Edition, Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 5: Functional requirements and testing
- ISO 11418-1, 3rd Edition, Containers and accessories for pharmaceutical preparations - Part 1: Drop-dispensing glass bottles
- ISO 11418-2, 3rd Edition, Containers and accessories for pharmaceutical preparations - Part 2: Screw-neck glass bottles for syrups
- ISO 11418-3, 3rd Edition, Containers and accessories for pharmaceutical preparations - Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms
- SS EN ISO 1135-5, 2016 Edition, Transfusion equipment for medical use - Part 5: Transfusion sets for single use with pressure infusion apparatus (ISO 1135-5:2015)
- SS EN ISO 8536-13, 2016 Edition, Infusion equipment for medical use - Part 13: Graduated flow regulators for single use with fluid contact (ISO 8536-13:2016)
- SS EN ISO 9626, 2016 Edition, Stainless steel needle tubing for the manufactureof medical devices (ISO 9626:1991)
