Wednesday, November 26, 2014

New Textile Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Textiles in General are now available:
  • BS EN 15777, Withdrawn and replaced by BS EN ISO 14389, Textiles. Test methods for phthalates
  • BS EN 31092, Withdrawn and replaced by BS EN ISO 11092, Textiles. Physiological effects. Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
  • BS EN ISO 105-B01, 2014 Edition, Textiles. Tests for colour fastness. Colour fastness to light: Daylight
  • BS EN ISO 105-B02, 2014 Edition, Textiles. Tests for colour fastness. Colour fastness to artificial light: Xenon arc fading lamp test
  • BS EN ISO 11092, 2014 Edition, Textiles. Physiological effects. Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
  • BS EN ISO 12945-3, 2014 Edition, Textiles. Determination of the fabric propensity to surface pilling, fuzzing or matting. Random tumble pilling method
  • BS ISO 3074, 2014 Edition, Wool. Determination of dichloromethane-soluble matter in combed sliver
  • BS ISO 13629-2, 2014 Edition, Textiles. Determination of antifungal activity of textile products. Plate count method
  • BS ISO 16533, 2014 Edition, Textiles. Measurement of exothermic and endothermic properties of textiles under humidity change
  • BS ISO 18184, 2014 Edition, Textiles. Determination of antiviral activity of textile products
  • ISO 105-B01, 6th Edition, Textiles - Tests for colour fastness - Part B01: Colour fastness to light: Daylight
  • ISO 105-B02, 6th Edition, Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
  • ISO 3074, 2nd Edition, Wool - Determination of dichloromethane-soluble matter in combed sliver
  • ISO 11092, 2nd Edition, Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
  • ISO 12945-3, 1st Edition, Textiles- Determination of the fabric propensity to surface pilling, fuzzing or matting - Part 3: Random tumble pilling method
  • ISO 16533, 1st Edition, Textiles - Measurement of exothermic and endothermic properties of textiles under humidity change
  • ISO 18184, 1st Edition, Textiles - Determination of antiviral activity of textile products


For more standards like these, please see our Document Center Inc. List of Standards on Textiles in General.

You'll also want to take a look at my previous posts:


Posted by at

Tuesday, November 25, 2014

New Environmental Testing Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Environmental Testing are now available:
  • ASTM D6660, 2001 Edition Reaffirmed in 2014 with an Editorial Correction, Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
  • ASTM D6665, 2009 Edition Reaffirmed in 2014, Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test
  • BS 7527-2.1, Withdrawn and replaced by BS EN 60721-2-1, Classification of environmental conditions. Environmental conditions appearing in nature. Temperature and humidity
  • BS 7527-2.3, Withdrawn and replaced by BS EN 60721-2-3, Classification of environmental conditions. Environmental conditions appearing in nature. Air pressure
  • BS EN 60721-2-1, 2014 Edition, Classification of environmental conditions. Environmental conditions appearing in nature. Temperature and Humidity
  • BS EN 60721-2-3, 2014 Edition, Classification of environmental conditions. Environmental conditions appearing in nature. Air pressure
  • IEC 60068-2-75, Edition 2.0, Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
  • PD CEN 16637-1, 2014 Edition, Construction products. Assessment of release of dangerous substances. Guidance for the determination of leaching tests and additional testing steps
  • PD CEN 16637-2, 2014 Edition, Construction products. Assessment of release of dangerous substances. Horizontal dynamic surface leaching test


For similar standards, please see our Document Center List of Standards on Environmental Testing.

You can also take a look at my previous postings:




Posted by at

Monday, November 24, 2014

New Switchgear And Controlgear Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Switchgear And Controlgear are now available:
  • BS EN 60265-1, Withdrawn and replaced by BS EN 62271-103, Specification for high-voltage switches. Switches for rated voltages above 1 kV and less than 52 kV
  • BS EN 60947-4-3, 2014 Edition, Low-voltage switchgear and controlgear. Contactors and motor-starters. AC semiconductor controllers and contactors for non-motor loads
  • BS EN 60947-6-1, 2005 Edition with Amendment 1, Low-voltage switchgear and controlgear. Multiple function equipment. Transfer switching equipment
  • BS EN 62271-102, Corrigendum 1 for 2002 Edition with Amendment A2, High-voltage switchgear and controlgear. Alternating current disconnectors and earthing switches
  • BS EN 62271-106, Corrigendum 1 for 2011 Edition, High-voltage switchgear and controlgear. Alternating current contactors, contactor-based controllers and motor-starters
  • BS EN 62271-201, 2014 Edition, High-voltage switchgear and controlgear. AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
  • IEC 60947-1 Amendment 2, Amendment 2 for Edition 5.0, Amendment 2, Part 1: General rules, Low-voltage switchgear and controlgear
  • IEC 61439-5, Edition 2.0, Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks
  • IEC 61641, Edition 3.0, Enclosed low-voltage switchgear and controlgear assemblies - Guide for testing under conditions of arcing due to internal fault
  • IEC 62026-3, Edition 3.0, Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet


For more standards like these, see our Document Center List of Standards on Switchgear And Controlgear.  You'll also be able to follow the links to the various sub-topics available.
Posted by at

Friday, November 21, 2014

New Road Vehicle System Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Road Vehicle Systems are now available:
  • ASTM A504, 2014 Edition, Standard Specification for Wrought Carbon Steel Wheels
  • ASTM D6478, 2010 Edition Reaffirmed in 2014, Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints
  • ASTM D7559, 2009 Edition Reaffirmed in 2014, Standard Test Method for Determining Pressure Decay of Inflatable Restraint Cushions
  • BS EN ISO 18541-1, 2014 Edition, Road vehicles. Standardized access to automotive repair and maintenance information (RMI). General information and use case definition
  • BS EN ISO 18541-2, 2014 Edition, Road vehicles. Standardized access to automotive repair and maintenance information (RMI). Technical requirements
  • BS EN ISO 18541-3, 2014 Edition, Road vehicles. Standardized access to automotive repair and maintenance information (RMI). Functional user interface requirements
  • BS ISO 17215-2, 2014 Edition, Road vehicles. Video communication interface for cameras (VCIC). Service discovery and control
  • BS ISO 17215-3, 2014 Edition, Road vehicles. Video communication interface for cameras (VCIC). Camera message dictionary
  • BS ISO 17215-4, 2014 Edition, Road vehicles. Video communication interface for cameras (VCIC). Implementation of communication requirements
  • BS ISO 17324, 2014 Edition, Rubber hoses for automotive turbochargers. Specification
  • BS ISO 19072-1, 2014 Edition, Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections. Pocket interface definition
  • IEC 62485-3, Edition 2.0, Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries
  • ISO 2575 Amendment 3, Amendment 3 for the 8th Edition, Amendment 3 - Road vehicles - Symbols for controls, indicators and tell-tales
  • ISO 15007-2, 2nd Edition, Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 2: Equipment and procedures
  • ISO 17324, 1st Edition, Rubber hoses for automotive turbochargers - Specification
  • ISO 18541-1, 1st Edition, Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 1: General information and use case definition
  • ISO 18541-2, 1st Edition, Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 2: Technical requirements
  • ISO 18541-3, 1st Edition, Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 3: Functional user interface requirements
  • ISO 18571, 1st Edition, Road vehicles - Objective rating metric for non-ambiguous signals


For more standards like these, please see our Document Center List of Standards on Road Vehicle Systems.  Here you'll find additional links to the sub-topics on this subject.

You'll also want to review my previous postings:



Posted by at

Thursday, November 20, 2014

New Welding, Brazing And Soldering Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Welding, Brazing And Soldering are now available:
  • BS EN 29455-5, Withdrawn and replaced by BS EN ISO 9455-5, Soft soldering fluxes. Test methods. Copper mirror test
  • BS EN 60974-10, 2014 Edition, Arc welding equipment. Electromagnetic compatibility (EMC) requirements
  • BS EN ISO 9453, 2014 Edition, Soft solder alloys. Chemical compositions and forms
  • BS EN ISO 9455-5, 2014 Edition, Soft soldering fluxes. Test methods. Copper mirror test
  • BS EN ISO 14555, Corrigendum 1 for 2014 Edition, Welding. Arc stud welding of metallic materials
  • BS EN ISO 15614-12, 2014 Edition, Specification and qualification of welding procedures for metallic materials. Welding procedure test. Spot, seam and projection welding
  • BS ISO 13469, 2014 Edition, Mechanical joining. Form-fit blind rivets and (lock) bolt joints. Specifications and qualification of testing procedures
  • DIN EN 12814-3, 2014 Edition, Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test (English language edition)
  • DIN EN 14700, 2014 Edition, Welding consumables - Welding consumables for hard-facing (English language edition)
  • DIN EN ISO 5817, 2014 Edition, Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) – Quality levels for imperfections (English language edition)
  • DIN EN ISO 14555, 2014 Edition, Welding. Arc stud welding of metallic materials (English language edition)
  • IEC 60050-851 Amendment 1, Amendment 1 for Edition 2.0, International Electrotechnical Vocabulary - Part 851: Electric welding
  • ISO 9453, 3rd Edition, Soft solder alloys - Chemical compositions and forms
  • ISO 13392, 1st Edition, Health and safety in welding and allied processes - Arc welding fume components
  • ISO 13469, 1st Edition, Mechanical joining - Form-fit blind rivets and (lock) bolt joints - Specifications and qualification of testing procedures
  • ISO 14555, 3rd Edition Corrected Reprint, Welding. Arc stud welding of metallic materials
  • ISO 15614-12, 2nd Edition, Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding
  • ISO 18786, 1st Edition, Health and safety in welding - Guidelines for risk assessment of welding fabrication activities


For more standards like these, please see our Document Center List of Standards on Welding, Brazing And Soldering.  You can also follow links on that page to additional sub-sets of this classification.

And don't forget to take a look at our previous posts:



Posted by at

Wednesday, November 19, 2014

New Petroleum Products Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Petroleum Products in General are now available:
  • ASTM D323, 2008 Edition reaffirmed in 2014, Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
  • ASTM D445, 2014 Edition with 2 Editorial Corrections, Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
  • ASTM D483, 2004 Edition reaffirmed in 2014, Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils
  • ASTM D1552, 2008 Edition reaffirmed in 2014 with an editorial correction, Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
  • ASTM D1747, 2009 Edition reaffirmed in 2014, Standard Test Method for Refractive Index of Viscous Materials
  • ASTM D2501, 2014 Edition, Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
  • ASTM D3120, 2008 Edition reaffirmed in 2014, Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
  • ASTM D5292, 1999 Edition reaffirmed in 2014, Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy
  • ASTM D5384, 2014 Edition, Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
  • ASTM D5505, 2014 Edition, Standard Practice for Classifying Emulsified Recycling Agents
  • ASTM D6300, 2014a Edition, Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
  • BS EN ISO 22854, 2014 Edition, Liquid petroleum products. Determination of hydrocarbon types and oxygen ates in automotive-motor gasoline and in ethanol (E85) automotive fuel. Multidimensional gas chromatography method (Co-numbered BS 2000-566)
  • ISO 19686-1, 1st Edition, Petroleum products - Equivalency of test method determining the same property - Part 1: Atmospheric distillation of petroleum products



You'll also want to review my  two previous blogs:


Posted by at

Tuesday, November 18, 2014

New Acoustic and Acoustic Measurement Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Acoustic and Acoustic Measurements are now available:
  • ASTM F1334, 2014 Edition, Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
  • BS EN 16272-3-2, 2014 Edition, Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance. Normalized railway noise spectrum and single number ratings for direct field applications
  • BS EN 61260, Withdrawn and replaced by BS EN 61260-1, Electroacoustics. Octave-band and fractional-octave-band filters
  • BS EN 61260-1, 2014 Edition, Electroacoustics. Octave-band and fractional-octave-band filters. Specifications
  • BS EN ISO 9902-1, 2001 Edition with Amendments 1 and 2, Textile machinery. Noise test code. Common requirements
  • BS EN ISO 9902-2, 2001 Edition with Amendments 1 and 2, Textile machinery. Noise test code. Spinning preparatory and spinning machinery
  • BS EN ISO 9902-3, 2001 Edition with Amendments 1 and 2, Textile machinery. Noise test code. Nonwoven machinery
  • BS EN ISO 9902-4, 2001 Edition with Amendments 1 and 2, Textile machinery. Noise test code. Yarn processing, cordage and rope manufacturing machinery
  • BS EN ISO 9902-5, 2001 Edition with Amendments 1 and 2, Textile machinery. Noise test code. Weaving and knitting preparatory machinery
  • BS EN ISO 9902-6, 2001 Edition with Amendments 1 and 2, Textile machinery. Noise test code. Fabric manufacturing machinery
  • BS EN ISO 9902-7, 2001 Edition with Amendments 1 and 2, Textile machinery. Noise test code. Dyeing and finishing machinery
  • BS EN ISO 11200, 2014 Edition, Acoustics. Noise emitted by machinery and equipment. Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
  • BS ISO 9902, Withdrawn and replaced by BS EN IS 9902-4, Textile machinery acoustics. Determination of sound pressure levels and sound power levels emitted by textile machines. Engineering and survey methods
  • BS ISO 12913-1, 2014 Edition, Acoustics. Soundscape. Definition and conceptual framework
  • DIN EN ISO 3095, 2014 Edition, Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles (ISO 3095:2013) English language edition
  • ISO 9902-1 Amendment 2, Amendment 2 for the 1st Edition, Amendment 2 - Textile machinery - Noise test code - Part 1: Common requirements
  • ISO 12913-1, 1st Edition, Acoustics - Soundscape - Part 1: Definition and conceptual framework
  • ISO 17534-2, 1st Edition, Acoustics - Software for the calculation of sound outdoors - Part 2: General recommendations for test cases and quality assurance interface
  • ISO 20283-4 Amendment 1, Amendment 1 for the 1st Edition, Amendment 1, Part 4: Measurement and evaluation of vibration of the ship propulsion machinery, Mechanical vibration - Measurement of vibration on ships


For more standards like these, please see our Document Center List of Standards on Acoustic and Acoustic Measurements.  There you'll find a series of links to the various sub-topics for this classification.

And don't forget to take a look at my previous postings:


Posted by at

Monday, November 17, 2014

New Anaesthetic, Respiratory And Reanimation Equipment for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Anaesthetic, Respiratory And Reanimation Equipment are now available:
  • ASTM F1208, Withdrawn without replacement, Standard Specification for Minimum Performance and Safety Requirements for Anesthesia Breathing Systems
  • ASTM F1850, Withdrawn without replacement, Standard Specification for Particular Requirements for Anesthesia Workstations and Their Components
  • BS EN ISO 8359, Withdrawn and replaced by BS EN ISO 80601-2-69, Oxygen concentrators for medical use. Safety requirements
  • BS EN ISO 10079-3, Corrigendum 1 for 2014 Edition, Medical suction equipment. Suction equipment powered from a vacuum or positive pressure gas source
  • BS EN ISO 80601-2-69, 2014 Edition, Medical electrical equipment. Particular requirements for basic safety and essential performance of oxygen concentrator equipment
  • ISO 8359, Withdrawn and replaced by ISO 80601-2-69, Oxygen concentrators for medical use - Safety requirements
  • ISO 80601-2-69, 1st Edition, Medical electrical equipment - Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment



You'll also want to take a look at my two previous postings:


Posted by at

Friday, November 14, 2014

New Agricultural Machines, Implements and Equipment Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Agricultural Machines, Implements and Equipment are now available:
  • BS 2769-2.14, Withdrawn and replaced by BS EN 50636-2-94, Hand-held electric motor-operated tools. Particular requirements. Specification for hedge trimmers and scissor-type grass shears
  • BS EN 50434, 2014 Edition, Safety of household and similar appliances. Particular requirements for mains operated shredders and chippers
  • BS EN 50636-2-94, 2014 Edition, Household and similar electrical appliances. Safety. Particular requirements for scissors type grass shears
  • BS EN 50636-2-100, 2014 Edition, Household and similar electrical appliances. Safety. Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums
  • BS ISO 730, 2009 Edition with Amendment 1, Agricultural wheeled tractors. Rear-mounted three-point linkage. Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4
  • BS ISO 8779, 2010 Edition with Amendment 1, Plastics piping systems. Polyethylene (PE) pipes for irrigation. Specifications
  • BS ISO 11783-6, 2014 Edition, Tractors and machinery for agriculture and forestry. Serial control and communications data network. Virtual terminal
  • BS ISO 11783-12, 2014 Edition, Tractors and machinery for agriculture and forestry. Serial control and communications data network. Diagnostics services
  • ISO 730 Amendment 1, Amendment 1 for the 1st Edition, Agricultural wheeled tractors - Rear-mounted three-point linkage - Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4
  • ISO 11783-6, 3rd Edition, Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 6: Virtual terminal
  • ISO 11783-12, 2nd Edition, Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 12: Diagnostics services


For more standards like these, please see our Document Center List of Standards on Agricultural Machines, Implements and Equipment.  Here you'll find links to the various sub-classifications on this subject.

You'll also want to review my previous blog postings:


Posted by at

Thursday, November 13, 2014

New Ophthalmic Equipment Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Ophthalmic Equipment are now available:
  • BS 3062, Withdrawn without replacement, Specification for ophthalmic lens materials
  • BS EN ISO 10343, 2014 Edition, Ophthalmic instruments. Ophthalmometers
  • BS EN ISO 11979-2, 2014 Edition, Ophthalmic implants. Intraocular lenses. Optical properties and test methods
  • BS EN ISO 11979-7, 2014 Edition, Ophthalmic implants. Intraocular lenses. Clinical investigations
  • BS EN ISO 11979-9, 2006 Edition with Amendment 1, Ophthalmic implants. Intraocular lenses. Multifocal intraocular lenses
  • BS EN ISO 11979-10, 2006 Edition with Amendment 1, Ophthalmic implants. Intraocular lenses. Phakic intraocular lenses
  • BS EN ISO 13212, 2014 Edition, Ophthalmic optics. Contact lens care products. Guidelines for determination of shelf-life
  • IEC 80601-2-58, Edition 2.0, Medical electrical equipment -- Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
  • ISO 8598-1, 1st Edition, Optics and optical instruments - Focimeters - Part 1: General purpose instruments
  • ISO 10343, 3rd Edition, Ophthalmic instruments - Ophthalmometers
  • ISO 11979-2, 2nd Edition, Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods
  • ISO 11979-6, 3rd Edition, Ophthalmic implants - Intraocular lenses - Part 6: Shelf-life and transport stability testing
  • ISO 11979-7, 3rd Edition, Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations
  • ISO 11979-9 Amendment 1, Amendment 1 for the 1st Edition, AMENDMENT 1, Part 9: Multifocal intraocular lenses, Ophthalmic implants - Intraocular lenses
  • ISO 11979-10 Amendment 1, Amendment 1 for the 1st Edition, AMENDMENT 1, Part 10: Phakic intraocular lenses, Ophthalmic implants - Intraocular lenses
  • ISO 13212, 3rd Edition, Ophthalmic optics - Contact lens care products - Guidelines for determination of shelf-life


For other standards on this topic, please see our Document Center List of Standards on Ophthalmic Equipment.

You'll also want to review my previous postings:


And to learn about even more new standards:

 New Ophthalmic Equipment Standards for the 1st Quarter 2015
Posted by at

Wednesday, November 12, 2014

New Ignitability And Burning Behavior Of Materials And Products Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on  Ignitability And Burning Behavior Of Materials And Products are now available:
  • ASTM D4391, 1993a Edition Reaffirmed in 2014 with an Editorial Correction, Standard Terminology Relating to The Burning Behavior of Textiles
  • ASTM E662, 2014 Edition, Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
  • ASTM E1725, 2014 Edition, Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
  • ASTM E2336, 2014 Edition, Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
  • BS EN 60695-2-11, 2014 Edition, Fire hazard testing. Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products (GWEPT)
  • BS EN 60695-2-12, 2010 Edition with Amendment 1, Fire hazard testing. Glowing/hot-wire based test methods. Glow-wire flammability index (GWFI) test method for materials
  • BS EN 60695-2-13, 2010 Edition with Amendment 1, Fire hazard testing. Glowing/hot-wire based test methods. Glow-wire ignition temperature (GWIT) test method for materials
  • BS EN ISO 8030, 2014 Edition, Rubber and plastics hoses. Method of test for flammability
  • BS ISO 14934-4, 2014 Edition, Fire tests. Calibration and use of heat flux meters. Guidance on the use of heat flux meters in fire tests
  • DIN EN 71-2, 2014 Edition, Safety of toys - Part 2: Flammability
  • IEC 60695-11-10, Corrigendum 1 for Edition 2.0, Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
  • ISO 8030, 3rd Edition, Rubber and plastics hoses - Method of test for flammability
  • ISO 14934-4, 1st Edition, Fire tests - Calibration and use of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests



You'll also want to take a look at my previous postings:




Posted by at

Tuesday, November 11, 2014

New Implants For Surgery, Prosthetics And Orthotics Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Implants For Surgery, Prosthetics And Orthotics are now available:
  • ASTM F1223, 2014 Edition, Standard Test Method for Determination of Total Knee Replacement Constraint
  • ASTM F1926, 2014 Edition, Standard Test Method for Dissolution Testing of Calcium Phosphate Granules, Fabricated Forms, and Coatings
  • ASTM F2028, 2014 Edition, Standard Test Methods for Dynamic Evaluation of Glenoid Loosening or Disassociation
  • ASTM F2052, 2014 Edition, Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment
  • BS 7252-4, Withdrawn and replaced by BS ISO 5832-4, Metallic materials for surgical implants. Specification for cobalt-chromium-molybdenum casting alloy
  • BS 7252-11, Withdrawn and replaced by BS ISO 5832-11, Metallic materials for surgical implants. Specification for wrought titanium 6-aluminium 7-niobium alloy
  • BS ISO 5832-4, 2014 Edition, Implants for surgery. Metallic materials. Cobalt-chromium-molybdenum casting alloy
  • BS ISO 5832-11, 2014 Edition, Implants for surgery. Metallic materials. Wrought titanium 6-aluminium 7-niobium alloy
  • BS ISO 5841-2, 2014 Edition, Implants for surgery. Cardiac pacemakers. Reporting of clinical performance of populations of pulse generators or leads
  • ISO 5832-4, 3rd Edition, Implants for surgery - Metallic materials - Part 4: Cobalt-chromium-molybdenum casting alloy
  • ISO 5832-11, 2nd Edition, Implants for surgery - Metallic materials - Part 11: Wrought titanium 6-aluminium 7-niobium alloy
  • ISO 5841-2, 3rd Edition, Implants for surgery - Cardiac pacemakers - Part 2: Reporting of clinical performance of populations of pulse generators or leads
  • ISO 12891-2, 2nd Edition, Retrieval and analysis of surgical implants - Part 2: Analysis of retrieved surgical implants
  • ISO 14708-1, 2nd Edition, Implants for surgery - Active implantable medical devices - Part 1: General requirements for safety, marking and for information to be provided by the manufacturer



You'll also want to review my previous postings:





Posted by at

Monday, November 10, 2014

New Protective Equipment Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Protective Equipment are now available:
  • ASTM F803, 2014 Edition, Standard Specification for Eye Protectors for Selected Sports
  • ASTM F1670, 2008 Edition Reapproved in 2014 with an Editorial Correction, Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood
  • ASTM F1776, 2014 Edition, Standard Specification for Eye Protective Devices for Paintball Sports
  • ASTM F2681, 2008 Edition Reapproved in 2014, Standard Specification for Body Protectors Used in Equine Racing
  • BS 3783, Withdrawn without replacement, Specification for X-ray lead-rubber protective aprons for personal use
  • BS 8478, Withdrawn and replaced by BS EN 12021, Respiratory protective devices. Breathing gases for diving and hyperbaric applications. Requirements and test methods
  • BS 2606, Withdrawn without replacement, Specification for X-ray protective gloves for medical diagnostic purposes up to 150 kV peak
  • BS EN 469, 2014 Edition, Protective clothing for firefighters. Performance requirements for protective clothing for firefighting
  • BS EN 12021, 2014 Edition, Respiratory equipment. Compressed gases for breathing apparatus
  • BS EN ISO 12311, Corrigendum 1 for the 2013 Edition, Personal protective equipment. Test methods for sunglasses and related eyewear
  • BS EN ISO 20345, Corrigendum 1 for the 2011 Edition, Personal protective equipment. Safety footwear
  • BS EN ISO 20346, 2014 Edition, Personal protective equipment. Protective footwear
  • BS EN ISO 20347, Corrigendum 1 for the 2012 Edition, Personal protective equipment. Occupational footwear
  • DIN EN 250, 2014 Edition, Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing and marking
  • ISO 12311, 1st Edition Reprint, Personal protective equipment - Test methods for sunglasses and related eyewear


For more standards like these, please see our Document Center List of Standards on Protective Equipment.  You'll find links to the various sub-topics on this subject.

And you may want to also review my previous blogs:



Posted by at

Friday, November 7, 2014

New Cycle Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Cycles are now available:
  • BS 6102-5, Withdrawn and replaced by BS ISO 5775-1, Cycles. Specification for bicycle tyre designations and dimensions
  • BS EN 14764, Withdrawn and replaced by the BS EN ISO 4210 Series, City and trekking bicycles. Safety requirements and test methods
  • BS EN 14766, Withdrawn and replaced by the BS EN ISO 4210 Series, Mountain-bicycles. Safety requirements and test methods
  • BS EN 14781, Withdrawn and replaced by the BS EN ISO 4210 Series, Racing bicycles. Safety requirements and test methods
  • BS EN ISO 4210-1, 2014 Edition, Cycles. Safety requirements for bicycles. Terms and definitions
  • BS EN ISO 4210-2, 2014 Edition, Cycles. Safety requirements for bicycles. Requirements for city and trekking, young adult, mountain and racing bicycles
  • BS EN ISO 4210-3, 2014 Edition, Cycles. Safety requirements for bicycles. Common test methods
  • BS EN ISO 4210-4, 2014 Edition, Cycles. Safety requirements for bicycles. Braking test methods
  • BS EN ISO 4210-5, 2014 Edition, Cycles. Safety requirements for bicycles. Steering test methods
  • BS EN ISO 4210-6, 2014 Edition, Cycles. Safety requirements for bicycles. Frame and fork test methods
  • BS EN ISO 4210-7, 2014 Edition, Cycles. Safety requirements for bicycles. Wheels and rims test methods
  • BS EN ISO 4210-8, 2014 Edition, Cycles. Safety requirements for bicycles. Pedal and drive system test methods
  • BS EN ISO 4210-9, 2014 Edition, Cycles. Safety requirements for bicycles. Saddles and seat-post test methods
  • BS ISO 5775-1, 2014 Edition, Bicycle tyres and rims. Tyre designations and dimensions
  • ISO 4210-1, 1st Edition, Cycles - Safety requirements for bicycles - Part 1: Terms and definitions
  • ISO 4210-2, 1st Edition, Cycles - Safety requirements for bicycles - Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles
  • ISO 4210-3, 1st Edition, Cycles - Safety requirements for bicycles - Part 3: Common test methods
  • ISO 4210-4, 1st Edition, Cycles - Safety requirements for bicycles - Part 4: Braking test methods
  • ISO 4210-5, 1st Edition, Cycles - Safety requirements for bicycles - Part 5: Steering test methods
  • ISO 4210-6, 1st Edition, Cycles - Safety requirements for bicycles - Part 6: Frame and fork test methods
  • ISO 4210-7, 1st Edition, Cycles - Safety requirements for bicycles - Part 7: Wheels and rims test methods
  • ISO 4210-8, 1st Edition, Cycles - Safety requirements for bicycles - Part 8: Pedal and drive system test methods
  • ISO 4210-9, 1st Edition, Cycles - Safety requirements for bicycles - Part 9: Saddles and seat-post test methods


For more standards like these, please see the Document Center List of Standards on Cycles.
Posted by at

Thursday, November 6, 2014

New Construction Equipment Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Construction Equipment are now available:
  • BS EN 791, Withdrawn and replaced by BS EN 16228 Series, Drill rigs. Safety
  • BS EN 16228-1, 2014 Edition, Drilling and foundation equipment. Safety. Common requirements
  • BS EN 16228-2, 2014 Edition, Drilling and foundation equipment. Safety. Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
  • BS EN 16228-3, 2014 Edition, Drilling and foundation equipment. Safety. Horizontal directional drilling equipment (HDD)
  • BS EN 16228-4, 2014 Edition, Drilling and foundation equipment. Safety. Foundation equipment
  • BS ISO 21573-1, 2014 Edition, Building construction machinery and equipment. Concrete pumps. Terminology and commercial specifications
  • ISO 18650-2, 2nd Edition, Building construction machinery and equipment - Concrete mixers - Part 2: Procedure for examination of mixing efficiency
  • ISO 21573-1, 2nd Edition, Building construction machinery and equipment - Concrete pumps - Part 1: Terminology and commercial specifications


For similar standards, please take a look at our page: Document Center List of Standards on Construction Equipment.
Posted by at

Tuesday, November 4, 2014

New Optical Equipment Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Optical Equipment are now available:
  • BS 7012-10.4, Withdrawn and replaced by BS ISO 15362, Light microscopes. Minimum requirements for stereo microscopes. Information provided to the user
  • BS ISO 9345-2, 2014 Edition, Microscopes. Imaging distances related to mechanical reference planes. Infinity-corrected optical systems
  • BS ISO 10109, 2014 Edition, Optics and photonics. Guidance for the selection of environmental tests
  • BS ISO 14135-1, 2014 Edition, Optics and photonics. Specifications for telescopic sights. General-purpose instruments
  • BS ISO 14135-2, 2014 Edition, Optics and photonics. Specifications for telescopic sights. High-performance instruments
  • BS ISO 15362, 2014 Edition, Stereomicroscopes. Information provided to the user
  • ISO 9345-2, 2nd Edition, Microscopes - Imaging distances related to mechanical reference planes - Part 2: Infinity-corrected optical systems
  • ISO 10109, 1st Edition, Optics and photonics - Guidance for the selection of environmental tests
  • ISO 10109-1, Withdrawn and replaced by ISO 10109, Optics and optical instruments -- Environmental requirements -- Part 1: General information, definitions, climatic zones and their parameters
  • ISO 10109-6, Withdrawn and replaced by ISO 10109, Optics and optical instruments -- Environmental requirements -- Part 6: Test requirements for medical optical devices
  • ISO 10109-7, Withdrawn and replaced by ISO 10109, Optics and optical instruments -- Environmental requirements -- Part 7: Test requirements for optical measuring instruments
  • ISO 10109-8, Withdrawn and replaced by ISO 10109, Optics and optical instruments -- Environmental requirements -- Part 8: Test requirements for extreme conditions of use
  • ISO 10109-11, Withdrawn and replaced by ISO 10109, Optics and optical instruments -- Environmental requirements -- Part 11: Optical instruments for outdoor conditions of use
  • ISO 10109-12, Withdrawn and replaced by ISO 10109, Optics and optical instruments -- Environmental requirements -- Part 12: Conditions of transport for optical instruments
  • ISO 14135-1, 2nd Edition, Optics and photonics - Specifications for telescopic sights - Part 1: General-purpose instruments
  • ISO 14135-2, 2nd Edition, Optics and photonics - Specifications for telescopic sights - Part 2: High-performance instruments
  • ISO 15362, 2nd Edition, Stereomicroscopes - Information provided to the user


For similar standards, please see our Document Center List of Standards on Optical Equipment.

And you'll also want to review my previous blog:

Posted by at
Subscribe to: Posts (Atom)