New FDA Medical Device Guidance Documents for the 2nd Quarter 2016

Document Center Inc. is pleased to announce that the following new FDA Medical Device Guidance Documents are now available:

• Technical Considerations for Additive Manufactured Devices - Draft Guidance for Industry and Food and Drug Administration Staff
• Infectious Disease Next Generation Sequencing Based Diagnostic Devices: Microbial Identification and Detection of Antimicrobial Resistance and Virulence Markers - Draft Guidance for Industry and Food and Drug Administration Staff
• Postmarket Surveillance Under Section 522 of the Federal Food, Drug, and Cosmetic Act - Guidance for Industry and Food and Drug Administration Staff
• FDA Categorization of Investigational Device Exemption (IDE) Devices to Assist the Centers for Medicare and Medicaid Services (CMS) with Coverage Decisions, Draft Guidance for Sponsors, Clinical Investigators, Industry, Institutional Review Boards and Food and Drug Administration Staff
• Dissemination of Patient-Specific Information from Devices by Device Manufacturers - Draft Guidance for Industry and Food and Drug Administration Staff
• Use of International Standard ISO 10993-1, 'Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process' - Guidance for Industry and Food and Drug Administration Staff
• Evaluation and Reporting of Age, Race, and Ethnicity Data in Medical Device Clinical Studies - Draft Guidance for Industry and Food and Drug Administration Staff
• Leveraging Existing Clinical Data for Extrapolation to Pediatric Uses of Medical Devices - Guidance for Industry and Food and Drug Administration Staff
• Use of Public Human Genetic Variant Databases to Support Clinical Validity for Next Generation Sequencing (NGS)-Based In Vitro Diagnostics - Draft Guidance for Stakeholders and Food and Drug Administration Staff
• Use of Standards in FDA Regulatory Oversight of Next Generation Sequencing (NGS)-Based In Vitro Diagnostics (IVDs) Used for Diagnosing Germline Diseases - Draft Guidance for Stakeholders and Food and Drug Administration Staff
• Information to Support a Claim of Electromagnetic Compatibility (EMC) of Electrically-Powered Medical Devices - Guidance for Industry and Food and Drug Administration Staff

New Physicochemical Methods of Analysis Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Physicochemical Methods of Analysis are now available;

• ASTM D5996, 2016 Edition, Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
• ASTM D6142, 2016 Edition, Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography
• ASTM D6304, 2016 Edition, Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
• ASTM D6733, 2001 Edition Reapproved in 2016, Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
• ASTM D6866, 2016 Edition, Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
• ASTM D7740, 2011 Edition Reapproved in 2016, Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
• ASTM E135, 2016 Edition, Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
• ASTM E169, 2016 Edition, Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
• ASTM E1184, 2010 Edition Reapproved in 2016, Standard Practice for Determination of Elements by Graphite Furnace Atomic Absorption Spectrometry
• ASTM E1642, 2000 Edition Reapproved in 2016, Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
• ASTM E1727, 2016 Edition, Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
• ASTM E1729, 2016 Edition, Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
• ASTM E1775, 2016 Edition, Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
• ASTM E1787, 2016 Edition, Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography
• ASTM E1788, 2016 Edition, Standard Test Method for Acidity in Acrylonitrile
• ASTM E1790, 2004 Edition Reapproved in 2016 with Editorial Correction, Standard Practice for Near Infrared Qualitative Analysis
• ASTM E1792, 2003 Edition Reapproved in 2016, Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
• ASTM E2056, 2004 Edition Reapproved in 2016, Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses
• ASTM E2105, 2000 Edition Reapproved in 2016, Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
• ASTM E2120, 2010 Edition Reapproved in 2016, Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films
• ASTM F1710, 2008 Edition Reapproved in 2016, Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
• ASTM G136, 2003 Edition Reapproved in 2016, Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction

For more standards like these, please refer to our Document Center List of Standards on Physicochemical Methods of Analysis.

New Rubber Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Rubber are now available;

• ASTM D1630, 2016 Edition, Standard Test Method for Rubber Property - Abrasion Resistance (Footwear Abrader)
• ASTM D395, 2016 Edition, Standard Test Methods for Rubber Property - Compression Set
• BS ISO 813, 2016 Edition, Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90° peel method
• BS ISO 2782-1, 2016 Edition, Rubber, vulcanized or thermoplastic. Determination of permeability to gases. Differential-pressure methods
• BS ISO 14558, 2016 Edition, Rubber. Determination of residual unsaturation of hydrogenated nitrile butadiene rubber (HNBR) by infrared spectroscopy
• ISO 813, 5th Edition, Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90 degree peel method
• ISO 2782-1, 2nd Edition, Rubber, vulcanized or thermoplastic - Determination of permeability to gases - Part 1: Differential-pressure methods
• ISO 14558, 2nd Edition, Rubber - Determination of residual unsaturation of hydrogenated nitrile butadiene rubber (HNBR) by infrared spectroscopy

For more standards like these, please refer to our Document Center List of Standards on Rubber.

New Implants for Surgery, Prosthetics, and Orthotics Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Implants for Surgery, Prosthetics, and Orthotics are now available;

• AAMI/ISO TIR-12417, 2011 Edition Reprint (ANSI Designation Dropped), Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products
• AAMI/ISO TIR37137, 2014 Edition Reprint (ANSI Designation Dropped), Cardiovascular biological evaluation of medical devices - Guidance for absorbable implants
• ANSI/AAMI/ISO 5840-1, 2015 Edition, Cardiovascular implants-Cardiac valve prostheses - Part 1: General requirements
• ANSI/AAMI/ISO 5840-2, 2015 Edition, Cardiovascular implants-Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes
• ASTM F629, 2015 Edition, Standard Practice for Radiography of Cast Metallic Surgical Implants
• ASTM F703, Withdrawn Without Replacement, Standard Specification for Implantable Breast Prostheses
• ASTM F981, 2004 Edition Reapproved in 2016, Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Insertion into Bone
• ASTM F1264, 2016 Edition, Standard Specification and Test Methods for Intramedullary Fixation Devices
• ASTM F1814, 2015 Edition, Standard Guide for Evaluating Modular Hip and Knee Joint Components
• ASTM F1829, 2016 Edition, Standard Test Method for Static Evaluation of Anatomic Glenoid Locking Mechanism in Shear
• ASTM F2065, Withdrawn Without Replacement, Standard Practice for Testing for Alternative Pathway Complement Activation in Serum by Solid Materials
• ASTM F2385, 2015 Edition, Standard Practice for Determining Femoral Head Penetration into Acetabular Components of Total Hip Replacement Using Clinical Radiographs
• ASTM F2527, 2016 Edition, Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)
• ASTM F3129, 2016 Edition, Standard Guide for Characterization of Material Loss from Conical Taper Junctions in Total Joint Prostheses
• BS EN ISO 13959, Corrigendum 1 for the 2015 Edition, Water for haemodialysis and related therapies
• BS ISO 7206-4, 2010 Edition with Amendment 1, Implants for surgery. Partial and total hip joint prostheses. Determination of endurance properties and performance of stemmed femoral components
• BS ISO 29783-3, 2016 Edition, Prosthetics and orthotics. Vocabulary. Pathological gait (excluding prosthetic gait)
• DIN EN ISO 5480, Withdrawn and Replaced by DIN EN ISO 5840-2, Cardiovascular implants - Cardiac valve prostheses
• ISO 7206-4-AM1, Amendment to the 3rd Edition, AMENDMENT 1, Part 4: Determination of endurance properties and performance of stemmed femoral components, Implants for surgery - Partial and total hip joint prostheses
• ISO 10328, 2nd Edition, Prosthetics - Structural testing of lower-limb prostheses - Requirements and test methods
• ISO 16955, 1st Edition, Prosthetics - Quantification of physical parameters of ankle foot devices and foot units
• ISO 22675, 2nd Edition, Prosthetics - Testing of ankle-foot devices and foot units - Requirements and test methods
• ISO 29783-3, 1st Edition, Prosthetics and orthotics - Vocabulary - Part 3: Pathological gait (excluding prosthetic gait)
• PD ISO 16955, 2016 Edition, Prosthetics. Quantification of physical parameters of ankle foot devices and foot units

For more standards like these, please refer to our Document Center List of Standards on Implants for Surgery, Prosthetics, and Orthotics.

New IT Applications in Health Care Technology Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on IT Applicationsin Health Care Technology are now available;

• AAMI/IEC 80001-2-1, 2012 Edition Reprint (ANSI Designation Dropped), Application of risk management for IT-networks incorporating medical devices - Part 2-1: Step by step risk management of medical IT-networks; Practical applications and examples (ANSI/AAMI/IEC TIR80001-2-1:2012)
• AAMI/IEC 80001-2-2, 2012 Edition Reprint (ANSI Designation Dropped), Application of risk management for IT-networks incorporating medical devices - Part 2-2: Guidance for the disclosure and communication of medical device security
• AAMI/IEC 80001-2-3, 2012 Edition Reprint (ANSI Designation Dropped), Application of risk management for IT-networks incorporating medical devices - Part 2-3: Guidance for wireless networks (ANSI/AAMI/IEC TIR80001-2-3:2012)
• AAMI/IEC 80001-2-4, 2012 Edition Reprint (ANSI Designation Dropped), Application of risk management for IT-networks incorporating medical devices, Part 2-4: Application guidance, General implementation guidance for healthcare delivery organizations
• AAMI/IEC 80001-2-5, 2014 Edition Reprint (ANSI Designation Dropped), Application of risk management for IT-networks incorporating medical devices - Part 2-5: Application guidance - Guidance on distributed alarm systems
• AAMI/IEC 80001-2-7, 2014 Edition Reprint (ANSI Designation Dropped), Application of risk management for IT-networks incorporating medical devices - Application guidance - Part 2-7: Guidance for Healthcare Delivery Organizations (HDOs) on how to self-assess their conformance with IEC 80001-1
• BS EN ISO 15225, 2016 Edition, Medical devices. Quality management. Medical device nomenclature data structure
• BS EN ISO 21549-5, 2016 Edition, Health informatics. Patient healthcard data. Identification data
• ISO 17251, 1st Edition, Health informatics - Business requirements for a syntax to exchange structured dose information for medicinal products
• ISO 17523, 1st Edition, Health informatics - Business requirements for a syntax to exchange structured dose information for medicinal products
• ISO 19256, 1st Edition, Health informatics - Requirements for medicinal product dictionary systems for health care
• ISO 20440, 1st Edition, Health informatics - Identification of medicinal products - Implementation guide for ISO 11239 data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms, units of presentation, routes of administration and packaging
• ISO/IEEE 11073-10419, 1st Edition, Health informatics - Personal health device communication - Part 10419: Device specialization - Insulin pump
• ISO/IEEE 11073-10424, 1st Edition, Health informatics - Personal health device communication - Part 10424: Device specialization - Sleep apnoea breathing therapy equipment (SABTE)
• ISO/IEEE 11073-10425, 1st Edition, Health informatics - Personal health device communication - Part 10425: Device specialization - Continuous glucose monitor (CGM)

For more standards like these, please refer to our Document Center List of Standards on IT Applications in Health Care Technology.

New Non-Destructive Testing Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Non-Destructive Testing are now available;

• ASTM A1038, 2013 Edition with Editorial Correction, Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
• ASTM E1417, 2016 Edition, Standard Practice for Liquid Penetrant Testing
• ASTM E1444, 2016 Edition with Editorial Correction, Standard Practice for Magnetic Particle Testing
• ASTM E2446, 2016 Edition, Standard Practice for Manufacturing Characterization of Computed Radiography Systems
• ASTM E2861, 2016 Edition, Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams
• ASTM E2971, 2016 Edition, Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements
• BS EN 1330-7, Withdrawn and Replaced by BS EN ISO 12707, Non-destructive testing. Terminology. Terms used in magnetic particle testing
• BS EN ISO 12707, 2016 Edition, Non-destructive testing. Magnetic particle testing. Vocabulary
• BS EN ISO 18081, 2016 Edition, Non-destructive testing. Acoustic emission testing (AT). Leak detection by means of acoustic emission
• ISO 18081, 1st Edition, Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission
• UNE EN ISO 16946, 2016 Edition, Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
• UNE EN ISO 18563-1, 2016 Edition, Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments

For more standards like these, please refer to our Document Center List of Standards on Non-Destructive Testing.

New Quality Standards for the 2nd Quarter 2016

Document Center Inc. is pleased to announce that the following New Standards on Quality are now available:

• ASTM D6300, 2016 Edition, Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
• ASTM E1970, 2016 Edition, Standard Practice for Statistical Treatment of Thermoanalytical Data
• ASTM E2119, 2016 Edition, Standard Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices
• ASTM E2334, 2009 Edition Reaffirmed in 2013 with an Editorial Correction, Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample
• ASTM E2587, 2016 Edition, Standard Practice for Use of Control Charts in Statistical Process Control
• ASTM F2688, 2008 Edition Reapproved in 2014 with Editorial Correction, Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers
• BS EN 9104-002, 2016 Edition, Aerospace series. Quality management systems. Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs
• BS EN 61882, 2016 Edition, Hazard and operability studies (HAZOP studies). Application guide
• IEC 62775, Edition 1.0, Application guidelines - Technical and financial processes for implementing asset management systems
• ISO/IEC 27009, 1st Edition, Information technology - Security techniques - Sector-specific application of ISO/IEC 27001 - Requirements

For more standards on this topic, please see our Document Center List of Standards on Quality and it's links.

New Nanotechnology Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Physics, Chemistry (including Nanotechnology) are now available;

• ASTM F2625, 2010 Edition Reapproved in 2016, Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
• ISO 19716, 1st Edition, Nanotechnologies - Characterization of cellulose nanocrystals
• PD CEN 16937, 2016 Edition, Nanotechnologies. Guidance for the responsible development of nanotechnologies
• PD ISO 19337, 2016 edition, Nanotechnologies. Characteristics of working suspensions of nano-objects for in vitro assays to evaluate inherent nano-object toxicity
• PD ISO 19716, 2016 Edition, Nanotechnologies. Characterization of cellulose nanocrystals
• PD ISO 80004-12, 2016 Edition, Nanotechnologies. Vocabulary. Quantum phenomena in nanotechnology

For more standards like these, please refer to our Document Center List of Standards on Physics, Chemisty (including Nanotechnology).

New Optical Equipment Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Optical Equipment are now available;

• ASTM E766, 2014 Edition with Editorial Correction, Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
• ASTM F1863, 2016 Edition, Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts
• BS ISO 9022-9, 2016 Edition, Optics and photonics. Environmental test methods. Solar radiation and weathering
• BS ISO 14133-1, 2016 Edition, Optics and photonics. Specifications for binoculars, monoculars and spotting scopes. General purpose instruments
• BS ISO 14133-2, 2016 Edition, Optics and photonics. Specifications for binoculars, monoculars and spotting scopes. High performance instruments
• ISO 9022-9, 2nd Edition, Optics and photonics - Environmental test methods - Part 9: Solar radiation and weathering
• ISO 14133-1, 2nd Edition, Optics and photonics - Specifications for binoculars, monoculars and spotting scopes - Part 1: General purpose instruments
• ISO 14133-2, 2nd Edition, Optics and photonics - Specifications for binoculars, monoculars and spotting scopes - Part 2: High performance instruments

For more standards like these, please refer to our Document Center List of Standards on Optical Equipment.

New Packing Materials and Accessories Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Packing Materials and Accessories are now available;

• ASTM D3332, 1999 Edition Reapproved in 2016, Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
• ASTM D3950, 2016 Edition, Standard Specification for Strapping, Nonmetallic (and Joining Methods)
• ASTM D3981, 2009A Edition Reapproved in 2016, Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
• ASTM D4169, 2016 Edition, Standard Practice for Performance Testing of Shipping Containers and Systems
• ASTM E2609, 2008 Edition Reapproved in 2016, Standard Test Method for Odor or Flavor Transfer or Both from Rigid Polymeric Packaging
• ASTM F1608, 2016 Edition, Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)
• ASTM F2391, 2005 Edition Reapproved in 2016, Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas

For more standards like these, please refer to our Document Center List of Standards on Packing Materials and Accessories.

New Equipment for Children Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Equipment for Children are now available;

• ASTM F2012, 2016 Edition, Standard Consumer Safety Performance Specification for Stationary Activity Centers
• ASTM F2167, 2016 Edition, Standard Consumer Safety Specification for Infant Bouncer Seats
• ASTM F2194, 2016 Edition with Editorial Correction, Standard Consumer Safety Specification for Bassinets and Cradles
• ASTM F2236, 2016 Edition, Standard Consumer Safety Specification for Soft Infant and Toddler Carriers
• ASTM F2613, 2016 Edition with Editorial Correction, Standard Consumer Safety Specification for Children's Chairs and Stools
• ASTM F2670, 2016 Edition, Standard Consumer Safety Specification for Infant Bath Tubs
• ASTM F3084, 2016 Edition, Standard Consumer Safety Specification for Infant and Infant/Toddler Rockers

For more standards like these, please refer to our Document Center List of Standards on Equipment for Children.

New Dentistry Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Dentistry are now available;

• BS 6828-8.1, Withdrawn and Replaced by BS EN ISO 7787-1, Dental rotary instruments. Cutters. Specification for steel laboratory cutters
• BS EN ISO 2157, 2016 Edition, Dentistry. Nominal diameters and designation code numbers for rotary instruments
• BS EN ISO 3950, 2016 Edition, Dentistry. Designation system for teeth and areas of the oral cavity
• BS EN ISO 7787-1, 2016 Edition, Dentistry. Laboratory cutters. Steel laboratory cutters
• BS EN ISO 18556, 2016 Edition, Dentistry. Intraoral spatulas
• BS EN ISO 18739, 2016 Edition, Dentistry. Vocabulary of process chain for CAD/CAM systems
• ISO 2157, 4th Edition, Dentistry - Nominal diameters and designation code numbers for rotary instruments
• ISO 7787-1, 2nd Edition, Dentistry - Laboratory cutters - Part 1: Steel laboratory cutters
• ISO 10139-2, 3rd Edition, Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use
• ISO 18130, 1st Edition, Dentistry - Screw loosening test using cyclic torsional loading for implant body/implant abutment connection of endosseous dental implants
• ISO 18556, 1st Edition, Dentistry - Intraoral spatulas
• PD ISO 18130, 2016 Edition, Dentistry. Screw loosening test using cyclic torsional loading for implant body/implant abutment connection of endosseous dental implants

For more standards like these, please refer to our Document Center List of Standards on Dentistry.

New Corrosion of Metals Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Corrosion of Metals are now available;

• ASTM B117, 2016 Edition, Standard Practice for Operating Salt Spray (Fog) Apparatus
• ASTM D1838, 2016 Edition, Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
• ASTM D7376, 2010A Edition Reapproved in 2016, Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals
• ASTM G30, 1997 Edition Reapproved in 2016, Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens
• ASTM G37, 1998 Edition Reapproved in 2016, Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress-Corrosion Cracking Susceptibility of Copper-Zinc Alloys
• ASTM G39, 1999 Edition Reapproved in 2016, Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
• ASTM G119, 2009 Edition Reapproved in 2016, Standard Guide for Determining Synergism Between Wear and Corrosion
• ASTM G158, 1998 Edition Reapproved in 2016, Standard Guide for Three Methods of Assessing Buried Steel Tanks
• ASTM G186, 2005 Edition Reapproved in 2016, Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
• BS 8701, 2016 Edition, Full ring ovalization test for determining the susceptibility to cracking of linepipe steels in sour service. Test method

For more standards like these, please refer to our Document Center List of Standards on Corrosion of Metals.

New Geotextiles Standards for the 2nd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Geotextiles are now available;

• ASTM D1987, 2007 Edition Reapproved in 2016, Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters
• ASTM D4886, 2010 Edition Reapproved in 2016, Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method)
• ASTM D5262, 2016 Edition, Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics
• ASTM D5493, 2006 Edition Reapproved in 2016, Standard Test Method for Permittivity of Geotextiles Under Load
• ASTM D5596, 2003 Edition Reapproved in 2016, Standard Test Method For Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics
• ASTM D5819, 2005 Edition Reapproved in 2016, Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
• ASTM D6389, 1999 Edition Reapproved in 2016, Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids
• ASTM D6707, 2006 Edition Reapproved in 2016 with Editorial Correction, Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications
• ASTM D7178, 2016 Edition, Standard Practice for Determining the Number of Constrictions 'm' of Non-Woven Geotextiles as a Complementary Filtration Property
• ASTM D7748, 2014 Edition with Editorial Correction, Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products
• BS EN 13719, 2016 Edition, Geosynthetics. Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers
• UNE-EN-13254, 2014 Edition with Amendment 1, Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams

For more standards like these, please refer to our Document Center List of Standards on Geotextiles.

New Plastics Pipes Standards for the 1st Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Plastics Pipes are now available;

• ASTM D1598, 2015A Edition, Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
• ASTM D2852, 2016 Edition, Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
• ASTM F449, 2016 Edition, Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
• ASTM F667, 2016 Edition, Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
• ASTM-F1055, 2015 Edition, Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
• ASTM F1412, 2016 Edition, Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
• ASTM F2023, 2015 Edition, Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water
• BS EN ISO 9967, 2016 Edition, Thermoplastics pipes. Determination of creep ratio
• BS EN ISO 9969, 2016 Edition, Thermoplastics pipes. Determination of ring stiffness
• BS ISO 21307, Corrigendum 1 for the 2011 Edition, Plastics pipes and fittings. Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
• BS ISO 8513, 2016 Edition, Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test methods for the determination of the initial longitudinal tensile strength
• ISO 8513, 3rd Edition, Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test methods for the determination of the initial longitudinal tensile strength
• ISO 9967, 3rd Edition, Thermoplastics pipes - Determination of creep ratio
• ISO 9969, 3rd Edition, Thermoplastics pipes - Determination of ring stiffness

For more standards like these, please refer to our Document Center List of Standards on Plastics Pipes.