New Binders and Sealing Material Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Binders, Sealing Materials are now available:

• ASTM C603, 2014 Edition, Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
• ASTM C711, 2014 Edition, Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
• ASTM C719, 2014 Edition, Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
• ASTM C772, 2003 Edition Reaffirmed in 2014, Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
• ASTM C834, 2014 Edition, Standard Specification for Latex Sealants
• ASTM C916, 2014 Edition, Standard Specification for Adhesives for Duct Thermal Insulation
• ASTM C920, 2014a Edition, Standard Specification for Elastomeric Joint Sealants
• ASTM C1184, 2014 Edition, Standard Specification for Structural Silicone Sealants
• ASTM C1281, 2014 Edition, Standard Specification for Preformed Tape Sealants for Glazing Applications
• ASTM C1311, 2014 Edition, Standard Specification for Solvent Release Sealants
• ASTM C1369, 2007 Edition Reaffirmed in 2014, Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
• ASTM C1401, 2014 Edition, Standard Guide for Structural Sealant Glazing
• ASTM C1442, 2014 Edition, Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
• ASTM C1643, 2014 Edition, Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
• ASTM D36, 2014 Edition with Editorial Correction, Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
• ASTM D402, 2014 Edition, Standard Test Method for Distillation of Cutback Asphalt
• ASTM D545, 2014 Edition, Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
• ASTM D3161, 2014 Edition, Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method)
• ASTM D3909, 2014 Edition, Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules
• ASTM D4637, 2014 Edition with Editorial Correction, Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
• ASTM D6083, Withdrawn, Standard Specification for Liquid Applied Acrylic Coating Used in Roofing (Withdrawn 2014)
• ASTM D6141, 2014 Edition, Standard Guide for Screening Clay Portion and Index Flux of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids
• BS EN 12597, 2014 Edition, Bitumen and bituminous binders. Terminology
• BS ISO 11617, 2014 Edition, Buildings and civil engineering works. Sealants. Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling
• DIN EN 13859-1, 2014 Edition, Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for discontinuous roofing
• DIN EN 13859-2, 2014 Edition, Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for walls\
• ISO 11617, 1st Edition, Buildings and civil engineering works - Sealants - Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling

For more standards like these, please see our Document Center List of Standards on Binders, Sealing Materials.

New Aerospace Electric Equipment and System Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Aerospace Electric Equipment and Systems are now available:

• AS 6174, Revision A, Counterfeit Materiel; Assuring Acquisition of Authentic and Conforming Materiel
• BS EN 3774-004, 2014 Edition, Aerospace series. Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A. UNC thread terminals. Product standard
• BS EN 4008-018, 2014 Edition, Aerospace series. Elements of electrical and optical connection. Crimping tool and associated accessories. Positioner for crimping tool M22520/2-01. Product standard
• BS EN 4056-002, 2014 Edition, Aerospace series. Cable ties for harnesses. Index of product standards
• BS EN 4056-007, 2014 Edition, Aerospace series. Cable ties for harnesses. Peek cable ties. For operating temperatures. -55 °C to 240 °C. Product standard
• BS EN 4604-009, 2014 Edition, Aerospace series. Cable, electrical, for signal transmission. Cable, coaxial, light weight, 50 ohms, 180°C, type KW (light WN). Product standard
• BS EN 6059-504, 2014 Edition, Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Temperature rise within a loom due to self-heating when protected by a sleeve
• IEC 62396-5, Edition 1.0, Process management for avionics - Atmospheric radiation effects - Part 5: Assessment of thermal neutron fluxes and single event effects in  avionics systems
• IEC 62668-1, Edition 2.0, Process management for avionics - Counterfeit prevention - Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components
• IEC 62668-2, Edition 1.0, Process management for avionics - Counterfeit prevention - Part 2: Managing electronic components from non-franchised sources

For more standards like these, please see our Document Center List of Standards on Aerospace Electric Equipment and Systems.

You'll also want to review my previous postings:

New Aerospace Electric Equipment and System Standards for the 2nd Quarter 2014

New Aerospace Electric Equipment and System Standards for the 4th Quarter 2013

New Aerospace Electric Equipment and System Standards for the 3rd Quarter 2013

New Optoelectronics and Laser Equipment Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Optoelectronics and Laser Equipment are now available:

• BS EN 60825-1, 2014 Edition, Safety of laser products. Equipment classification and requirements (replaces BS EN 60825)
• BS EN 62522, 2014 Edition, Calibration of tuneable laser sources
• BS EN 62572-3, 2014 Edition, Fibre optic active components and devices. Reliability standards. Laser modules used for telecommunication
• BS IEC 62629-12-1, 2014 Edition, 3D Display devices. Measuring methods for stereoscopic displays using glasses. Optical
• BS IEC 62679-1-1, 2014 Edition, Electronic paper displays. Terminology
• BS IEC 62679-3-1, 2014 Edition, Electronic paper displays. Optical measuring methods
• BS IEC 62679-3-2, 2014 Edition, Electronic paper display. Measuring method. Electro-optical

For more standards like these, please see our Document Center List of Standards on Optoelectronics and Laser Equipment.

You can also review my previous postings:

New Optoelectronics and Laser Equipment Standards for the 2nd Quarter 2014

New Optoelectronics and Laser Equipment Standards for the 1st Quarter 2014

New Optoelectronics and Laser Equipment Standards for the 3rd Quarter 2013

New Optoelectronics and Laser Equipment Standards for the 2nd Quarter 2013

New Electrical Engineering Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Electrical Engineering are now available:

• ASTM E1725, 2014 Edition, Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
• BS EN 60695-2-11, 2014 Edition, Fire hazard testing. Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products (GWEPT)
• BS EN 60695-2-12, 2010 Edition with Amendment A1, Fire hazard testing. Glowing/hot-wire based test methods. Glow-wire flammability index (GWFI) test method for materials
• BS EN 60695-2-13, 2010 Edition with Amendment A1, Fire hazard testing. Glowing/hot-wire based test methods. Glow-wire ignition temperature (GWIT) test method for materials
• BS EN 61936-1, 2010 Edition with Amendment A1, Power installations exceeding 1 kV a.c. Common rules
• IEC 60050-151 Amendment 2, Amendment 2 for Edition 2.0, Amendment 2 - International Electrotechnical Vocabulary - Part 151: Electrical and magnetic devices
• IEC 60050-161 Amendment 4, Amendment 4 for Edition 1.0, Amendment 4 - International Electrotechnical Vocabulary - Part 161: Electromagnetic compatibility
• IEC 60050-903 Amendment 1, Amendment 1 for Edition 1.0, Amendment 1 - International Electrotechnical Vocabulary - Part 903: Risk assessment
• IEC 60695-11-10, Corrigendum 1 for the Edition 2.0, Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
• IEC 62726, Edition 1.0, Guidance on quantifying greenhouse gas emission reductions from the baseline for electrical and electronic products and systems

For more standards like these, please see our Document Center List of Standards on Electrical Engineering.

You can also review my previous posts:

New Electrical Engineering Standards for the 2nd Quarter 2014

New Electrical Engineering Standards for the 1st Quarter 2014

New Electrical Engineering Standards for the 3rd Quarter 2013

New Electrical Engineering Standards for the 1st Quarter 2013

New Radiation Protection Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Radiation Protection are now available:

• BS 2606, Withdrawn without replacement, Specification for X-ray protective gloves for medical diagnostic purposes up to 150 kV peak
• BS 3783, Withdrawn without replacement, Specification for X-ray lead-rubber protective aprons for personal use
• BS 4031, Withdrawn without replacement, Specification for X-ray protective lead glasses
• BS EN 60601-1-3, Corrigendum 1 for 2008 Edition with Amendment 1, Medical electrical equipment. General requirements for basic safety and essential performance. Collateral Standard: Radiation protection in diagnostic X-ray equipment
• BS EN 60825-1, 2014 Edition, Safety of laser products. Equipment classification and requirements
• IEC 60860, Edition 2.0, Radiation protection instrumentation - Warning equipment for criticality accidents
• IEC 61005, Edition 3.0, Radiation protection instrumentation - Neutron ambient dose equivalent (rate) meters
• IEC 61577-2, Edition 2.0, Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specific requirements for 222Rn and 220Rn measuring instruments

Want to see more standards like these?  Please visit our Document Center List of Standards on Radiation Protection.

You may also want to review my previous postings:

New Radiation Protection Standards for the 1st Quarter 2014

New Radiation Protection Standards for the 3rd Quarter 2013

New Car Informatics and On Board Computer System Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Car Informatics and On Board Computer Systems are now available:

• BS EN ISO 18541-1, 2014 Edition, Road vehicles. Standardized access to automotive repair and maintenance information (RMI). General information and use case definition
• BS EN ISO 18541-2, 2014 Edition, Road vehicles. Standardized access to automotive repair and maintenance information (RMI). Technical requirements
• BS EN ISO 18541-3, 2014 Edition, Road vehicles. Standardized access to automotive repair and maintenance information (RMI). Functional user interface requirements
• BS ISO 17215-2, 2014 Edition, Road vehicles. Video communication interface for cameras (VCIC). Service discovery and control
• BS ISO 17215-3, 2014 Edition, Road vehicles. Video communication interface for cameras (VCIC). Camera message dictionary
• BS ISO 17215-4, 2014 Edition, Road vehicles. Video communication interface for cameras (VCIC). Implementation of communication requirements
• ISO 15007-2, 2nd Edition, Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 2: Equipment and procedures
• ISO 18541-1, 1st Edition, Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 1: General information and use case definition
• ISO 18541-2, 1st Edition, Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 2: Technical requirements
• ISO 18541-3, 1st Edition, Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 3: Functional user interface requirements

For more standards like these, please see our Document Center List of Standards on Car Informatics and On Board Computer Systems.

New Stainless Steel Standards for the 3rd Quarter 2014

Document Center Inc. is pleased to announce that the following New Standards on Stainless Steel are now available:

• ASTM A262, 2014 Edition, Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
• ASTM A1022, 2014a Edition, Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
• ASTM F2328, 2014 Edition, Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
• ASTM F2328M, 2014 Edition, Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)
• ISO 630-5, 1st Edition, Structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
• ISO 683-4, 1st Edition, Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels
• ISO 683-18, 3rd Edition, Heat-treatable steels, alloy steels and free-cutting steels - Part 18: Bright steel products
• ISO 16143-1, 2nd Edition Corrected Reprint, Stainless steels for general purposes - Part 1: Corrosion-resistant flat products

Want to see more standards like these?  Please go to our Document Center List of Standards on Stainless Steel.

You'll also want to review my previous postings:

New Stainless Steel Standards for the 2nd Quarter 2014

Want to take a look at the latest releases?  Please review my new post:

New Stainless Steel Standards for the 1st Quarter 2015