New Chemical Analysis Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Chemical Analysis are now available:

• ASTM D2650, 2010 Edition Reapproved in 2015, Standard Test Method for Chemical Composition of Gases by Mass Spectrometry
• ASTM D5902, 2005 Edition Reapproved in 2015, Standard Test Method for Rubber - Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
• ASTM D6843, 2010 Edition Reapproved in 2015, Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)
• ASTM D6854, 2015 Edition, Standard Test Method for Silica-Oil Absorption Number
• ASTM E1386, 2015 Edition, Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction
• BS EN 61207-7, Corrigendum 1 for 2013 Edition, Expression of performance of gas analyzers. Tuneable semiconductor laser gas analyzers
• BS EN ISO 6142, Withdrawn and replaced by BS EN ISO 6142-1, Gas analysis. Preparation of calibration gas mixtures. Gravimetric method
• BS EN ISO 6142-1, 2015 Edition, Gas analysis. Preparation of calibration gas mixtures. Gravimetric method for Class I mixtures
• ISO 6142, Withdrawn and replaced by ISO-6142-1, Gas analysis -- Preparation of calibration gas mixtures -- Gravimetric method
• ISO 6142-1, 1st Edition, Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures
• ISO 13083, 1st Edition, Surface chemical analysis - Scanning probe microscopy - Standards on the definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes
• ISO 17109, 1st Edition, Surface chemical analysis - Depth profiling - Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films
• ISO 18507, 1st Edition, Surface chemical analysis - Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis

For more standards like these, please see our Document Center List of Standards on Chemical Analysis.

New Food Technology Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Food Technology are now available:

• ASTM D5974, 2015 Edition, Standard Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography
• ASTM E253, 2015a Edition, Standard Terminology Relating to Sensory Evaluation of Materials and Products
• BS EN 1674, 2015 Edition, Food processing machinery. Dough sheeters. Safety and hygiene requirements
• BS EN 13870, 2015 Edition, Food processing machinery, Portion cutting machines. Safety and hygiene requirements
• BS EN ISO 10504, 2015 Edition, Starch derivatives. Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups. Method using high-performance liquid chromatography
• BS EN ISO 10519, 2015 Edition with Corrigendum 1, Rapeseed. Determination of chlorophyll content. Spectrometric method
• BS EN ISO 11085, 2015 Edition, Cereals, cereals-based products and animal feeding stuffs. Determination of crude fat and total fat content by the Randall extraction method
• DIN EN 14108, 2015 Edition, Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of sodium content by atomic absorption spectrometry
• ISO 10519, 3rd Edition, Rapeseed - Determination of chlorophyll content - Spectrometric method
• ISO 11085, 2nd Edition, Cereals, cereals-based products and animal feeding stuffs - Determination of crude fat and total fat content by the Randall extraction method
• ISO 16488, 1st Edition, Marine finfish farms - Open net cage - Design and operation
• ISO 16541, 1st Edition, Methods for sea lice surveillance on marine finfish farms
• ISO 16741, 1st Edition, Traceability of crustacean products - Specifications on the information to be recorded in farmed crustacean distribution chains
• ISO 16779, 1st Edition, Sensory analysis - Assessment (determination and verification) of the shelf life of foodstuffs
• ISO 17780, 1st Edition, Animal and vegetable fats and oils - Determination of aliphatic hydrocarbons in vegetable oils
• ISO 18363-1, 1st Edition, Animal and vegetable fats and oils - Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS - Part 1: Method using fast alkaline transesterification and measurement for 3-MCPD and differential measurement for glycidol
• ISO 18538, 1st Edition, Traceability of molluscan products - Specifications on the information to be recorded in farmed molluscan distribution chains
• ISO 18539, 1st Edition, Traceability of molluscan products - Specifications on the information to be recorded in captured molluscan distribution chains

For more documents like these, please see our Document Center List of Standards on Food Technology.

And today at StandardsForum.com I have posted about Food Safety Standards News.  Take a look!

New Textile Fabric Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Textile Fabrics are now available:

• ASTM D1777, 1996 Edition Reapproved in 2015, Standard Test Method for Thickness of Textile Materials
• ASTM D3050, 2007 Edition Reapproved in 2015, Standard Guide for Measuring Soil Removal from Artificially Soiled Fabrics (Not Suitable for Detergent Ranking)
• ASTM D3511, 2015 Edition, Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
• ASTM D3787, 2015 Edition, Standard Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test
• ASTM D3885, 2007a Edition Reapproved in 2015, Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
• ASTM D3886, 1999 Edition Reapproved in 2015, Standard Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus)
• ASTM D4685, 2015 Edition, Standard Test Method for Pile Fabric Abrasion
• ASTM D5035, 2011 Edition Reapproved in 2015, Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
• ASTM D5587, 2015 Edition, Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
• ASTM D6413, 2015 Edition, Standard Test Method for Flame Resistance of Textiles (Vertical Test)
• ASTM D6479, 2015 Edition, Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints
• ASTM D6614, 2007 Edition Reapproved in 2015, Standard Test Method for Stretch Properties of Textile Fabrics - CRE Method
• ASTM D6770, 2007 Edition Reapproved in 2015, Standard Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method)
• ASTM D6797, 2015 Edition, Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
• ASTM D6828, 2002 Edition Reapproved in 2015, Standard Test Method for Stiffness of Fabric by Blade/Slot Procedure
• ISO 17608, 1st Edition, Textiles - Bare elastane yarns - Determination of resistance to chlorinated water (swimming-pool water)

For more standards like these, please see our Document Center List of Standards on Textile Fabrics.

New Agricultural Machines, Implements and Equipment Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on  Agricultural Machines, Implements and Equipment are now available:

• ASTM D5093, 2015 Edition, Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
• ASTM E1519, 2015a Edition, Standard Terminology Relating to Agricultural Tank Mix Adjuvants
• BS EN ISO 16231-2, 2015 Edition, Self-propelled agricultural machinery. Assessment of stability. Determination of static stability and test procedures
• BS EN ISO 17962, 2015 Edition, Agricultural machinery. Equipment for sowing. Minimization of the environmental effects of fan exhaust from pneumatic systems
• ISO 789-3, 3rd Edition, Agricultural tractors - Test procedures - Part 3: Turning and clearance diameters
• ISO 3600, 4th Edition, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Operators manuals - Content and format
• ISO 5131, 3rd Edition, Tractors for agriculture and forestry - Measurement of noise at the operators position - Survey method
• ISO 6535, 4th Edition, Portable chain-saws - Chain brake performance
• ISO 11783-10, 2nd Edition, Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 10: Task controller and management information system data interchange
• ISO 16230-1, 1st Edition, Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements
• ISO 16231-2, 1st Edition, Self-propelled agricultural machinery - Assessment of stability - Part 2: Determination of static stability and test procedures
• ISO 17962, 1st Edition, Agricultural machinery - Equipment for sowing - Minimization of the environmental effects of fan exhaust from pneumatic systems
• ISO 19858, 1st Edition, Forestry machines - Portable chain-saws - Test method for evaluating saw chain oil lubricity

For more standards like these, please see our Document Center List of Standards on  Agricultural Machines, Implements and Equipment.

New Sports Equipment And Facility Standards for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following New Standards on Sports Equipment And Facilities are now available:

• ASTM F381, 2015 Edition, Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
• ASTM F910, 2004 Edition Reapproved in 2015, Standard Specification for Face Guards for Youth Baseball
• ASTM F1081, 2009 Edition Reapproved in 2015, Standard Specification for Competition Wrestling Mats
• ASTM F1107, 2004 Edition Reapproved in 2015, Standard Terminology Relating to Snowboarding
• ASTM F1492, 2015 Edition, Standard Specification for Helmets Used in Skateboarding and Trick Roller Skating
• ASTM F1722, 2015 Edition, Standard Test Method for Determining Mass and Moment of Inertia of Alpine Skis
• ASTM F1882, 2015 Edition, Standard Specification for Residential Basketball Systems
• ASTM F2225, 2015 Edition, Standard Safety Specification for Consumer Trampoline Enclosures
• ASTM F2571, 2011 Edition Reapproved in 2015, Standard Specification for Paintball Marker Barrel Blocking Devices
• BS EN 16582-1, 2015 Edition, Domestic swimming pools. General requirements including safety and test methods
• BS EN 16582-2, 2015 Edition, Domestic swimming pools. Specific requirements including safety and test methods for inground pools
• BS EN 16582-3, 2015 Edition, Domestic swimming pools. Specific requirements including safety and test methods for aboveground pools
• BS EN 16664, 2015 Edition, Playing field equipment. Lightweight goals. Functional, safety requirements and test methods
• PAS 520, 2015 Edition, Safeguarding 0 to 4 year old children within the teaching of swimming, including any associated professional photography. Code of practice
• ISO 8783, 2nd Edition, Alpine skis - Guidelines for conducting slope performance tests
• ISO 9523, 3rd Edition, Touring ski-boots for adults - Interface with touring ski-bindings - Requirements and test methods
• ISO 9838, 3rd Edition, Alpine and touring ski-bindings - Test soles for ski-binding tests
• ISO 11087, 3rd Edition, Alpine ski-bindings - Retention devices - Requirements and test methods
• ISO 11110, 2nd Edition, Winter-sports equipment - Test devices for the setting of the functional unit ski/boot/binding - Requirements and tests
• SS EN 16582-1, 2015 Edition, Domestic swimming pools. General requirements including safety and test methods (English Language)
• SS EN 16582-2, 2015 Edition, Domestic swimming pools. Specific requirements including safety and test methods for inground pools (English Language)
• SS EN 16582-3, 2015 Edition, Domestic swimming pools. Specific requirements including safety and test methods for aboveground pools (English Language)
• SS EN 16664, 2015 Edition, Playing field equipment. Lightweight goals. Functional, safety requirements and test methods (English Language)

For more standards like these, please see our Document Center List of Standards on Sports Equipment And Facilities.

You can also review my previous post:

New Sports Equipment And Facility Standards for the 2nd Quarter 2015

New FDA Medical Device Guidance Documents for the 3rd Quarter 2015

Document Center Inc. is pleased to announce that the following FDA Medical Device Guidance Documents are now available:

• Intent to Exempt Certain Unclassified, Class II, and Class I Reserved Medical Devices from Premarket Notification Requirements - Guidance for Industry and Food and Drug Administration Staff
• Heparin-Containing Medical Devices and Combination Products: Recommendations for Labeling and Safety Testing - Draft Guidance for Industry and Food and Drug Administration Staff
• Submission of Premarket Notifications for Magnetic Resonance Diagnostic Devices; Draft Guidance for Industry and Food and Drug Administration Staff
• FY 2016 Medical Device User Fee Small Business Qualification and Certification - Guidance for Industry, Food and Drug Administration Staff and Foreign Governments
• Refuse to Accept Policy for 510(k)s - Guidance for Industry and Food and Drug Administration Staff
• Draft Guidance for Industry and Food and Drug Administration Staff - Establishing the Performance Characteristics of In Vitro Diagnostic Devices for the Detection or Detection and Differentiation of Human Papillomaviruses
• Endotoxin Testing Recommendations for Single-Use Intraocular Ophthalmic Devices - Guidance for Industry and Food and Drug Administration Staff
• Global Unique Device Identification Database (GUDID): Data Submission Compliance Date of September 24, 2015 - Guidance for Industry and Food and Drug Administration Staff
• Select Updates for Non-Clinical Engineering Tests and Recommended Labeling for Intravascular Stents and Associated Delivery Systems - Guidance for Industry and Food and Drug Administration Staff
• Class II Special Controls Guideline: Nucleic Acid Amplification Assays for the Detection of Trichomonas vaginalis - Guideline for Industry and Food and Drug Administration Staff
• Class II Special Controls Guideline Document: Toxin Gene Amplification Assays for the Detection of Clostridium difficile - Guideline for Industry and Food and Drug Administration Staff

You may also want to review my previous post:

New FDA Medical Device Guidance Documents for the 2nd Quarter 2015

New Semiconductor Standards for 2015

Document Center Inc. is pleased to announce that the following New Standards on Semiconductor Devices are now available:

• BS EN 60747-5-5, 2011 Edition with Amendment A1, Semiconductor devices. Discrete devices. Optoelectronic devices. Photocouplers
• BS EN 62007-1, 2015 Edition, Semiconductor optoelectronic devices for fibre optic system applications. Specification template for essential ratings and characteristics
• BS EN 62031, 2008 Edition with Amendment A2, LED modules for general lighting. Safety specifications
• BS EN 62047-15, 2015 Edition, Semiconductor devices. Micro-electromechanical devices. Test method of bonding strength between PDMS and glass
• BS EN 62047-16, 2015 Edition, Semiconductor devices. Micro-electromechanical devices. Test methods for determining residual stresses of MEMS films. Wafer curvature and cantilever beam deflection methods
• BS EN 62047-17, 2015 Edition, Semiconductor devices. Micro-electromechanical devices. Bulge test method for measuring mechanical properties of thin films
• IEC 60700-1, Edition 2.0, Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
• IEC 62007-1, Edition 3.0, Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics
• IEC 62047-15, Edition 1.0, Semiconductor devices - Micro-electromechanical devices - Part 15: Test method of bonding strength between PDMS and glass
• IEC 62047-16, Edition 1.0, Semiconductor devices - Micro-electromechanical devices - Part 16: Test methods for determining residual stresses of MEMS films - Wafer curvature and cantilever beam deflection methods
• IEC 62047-17, Edition 1.0, Semiconductor devices - Micro-electromechanical devices - Part 17: Bulge test method for measuring mechanical properties of thin films

For more standards like these, please see our Document Center List of Standards on Semiconductor Devices.