New Latex and Raw Rubber Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Latex and Raw Rubber are now available;

• ASTM D2702, 2005 Edition Reapproved in 2016, Standard Practice for Rubber Chemicals - Determination of Infrared Absorption Characteristics
• BS ISO 249, 2016 Edition, Rubber, raw natural. Determination of dirt content
• BS ISO 6235, 2016 Edition, Rubber, raw. Determination of block polystyrene content. Ozonolysis method
• BS ISO 19246, 2016 Edition, Rubber compounding ingredients. Silica. Oil absorption of precipitated silica
• ISO 249, 5th Edition, Rubber, raw natural - Determination of dirt content
• ISO 6235, 3rd Edition, Rubber, raw - Determination of block polystyrene content - Ozonolysis method
• ISO 19246, 1st Edition, Rubber compounding ingredients - Silica - Oil absorption of precipitated silica

For more standards like these, please refer to our Document Center List of Standards on Latex and Raw Rubber

New Food Microbiology Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following standards on Food Microbiology are now available;

• ASTM E2449, Withdrawn and Replaced by ASTM F1356, Standard Guide for Irradiation of Pre-packaged Processed Meat and Poultry Products to Control Pathogens and Other Microorganisms
• BS EN ISO 16140, Withdrawn and Replaced by BS EN ISO 16140-1, BS EN ISO 16140-2, Microbiology of food and animal feeding stuffs. Protocol for the validation of alternative methods
• BS EN ISO 16140-1, 2016 Edition, Microbiology of the food chain. Method validation. Vocabulary
• BS EN ISO 16140-2, 2016 Edition, Microbiology of the food chain. Method validation. Protocol for the validation of alternative (proprietary) methods against a reference method
• BS EN ISO 17468, 2016 Edition, Microbiology of the food chain. Technical requirements and guidance on establishment or revision of a standardized reference method

For more standards like these, please refer to our Document Center List of Standards on Food Microbiology. 

New Iron and Steel Pipes Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Iron and Steel Pipes are now available;

• ASTM A249, 2016A Edition, Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
• ASTM A268, 2010 Edition Reapproved in 2016, Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
• ASTM A312, 2016A Edition, Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
• ASTM A369, 2011 Edition Reapproved in 2016, Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
• ASTM E309, 2016 Edition, Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation
• ASTM E2096, 2016 Edition, Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing
• JIS G 3457, 2016 Edition, Arc welded carbon steel pipes

For more standards like these, please refer to our Document Center List of Standards on Iron and Steel Pipes.

New Analytical Chemistry Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Analytical Chemistry are now available;

• ASTM C1561, 2010 Edition Reapproved in 2016, Standard Guide for Determination of Plutonium and Neptunium in Uranium Hexafluoride and U-Rich Matrix by Alpha Spectrometry
• ASTM D3802, 2016 Edition, Standard Test Method for Ball-Pan Hardness of Activated Carbon
• ASTM D4638, 2016 Edition, Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
• ASTM D5228, 2016 Edition, Standard Test Method for Determination of Butane Working Capacity of Activated Carbon
• ASTM D5542, 2016 Edition, Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
• ASTM D5544, 2016 Edition, Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water
• ASTM D5742, 2016 Edition, Standard Test Method for Determination of Butane Activity of Activated Carbon
• ASTM D5871, 2016 Edition, Standard Specification for Benzene for Cyclohexane Feedstock
• ASTM D6042, 2009 Edition Reapproved in 2016, Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)
• ASTM D6304, 2016 Edition with Editorial Correction, Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
• ASTM D6656, 2016 Edition, Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation)
• ASTM D7183, 2016 Edition, Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
• ASTM E95, 1968 Edition Reapproved in 2016, Standard Specification for Cell-Type Oven with Controlled Rates of Ventilation
• ASTM E124, 1994 Edition Reapproved in 2016, Standard Specification for Weighing and Drying Apparatus for Microchemical Analysis
• ASTM E133, 1992 Edition Reapproved in 2016, Standard Specification for Distillation Equipment
• ASTM E715, 1980 Edition Reapproved in 2016, Standard Specification for Gravity-Convection and Forced-Circulation Water Baths
• ASTM E2729, 2016 Edition, Standard Practice for Rectification of Spectrophotometric Bandpass Differences
• BS ISO 15471, 2016 Edition, Surface chemical analysis. Auger electron spectroscopy. Description of selected instrumental performance parameters
• BS ISO 17973, 2016 Edition, Surface chemical analysis. Medium-resolution Auger electron spectrometers. Calibration of energy scales for elemental analysis
• ISO 15471, 2nd Edition, Surface chemical analysis - Auger electron spectroscopy - Description of selected instrumental performance parameters
• ISO 17973, 2nd Edition, Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis
• IWA-23, 1st Edition, Interoperability of microfluidic devices - Guidelines for pitch spacing dimensions and initial device classification

For more standards like these, please refer to our Document Center List of Standards on Analytical Chemistry.

New Ventilation and Air-Conditioning Systems Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Ventilation and Air-Conditioning Systems are now available;

• BS EN 12735-2, 2016 Edition, Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration. Tubes for equipment
• BS EN 14037-4, 2016 Edition, Free hanging heating and cooling surfaces for water with a temperature below 120°C. Pre-fabricated ceiling mounted radiant panels. Test method for cooling capacity
• BS EN ISO 15858, 2016 Edition, UV-C Devices. Safety information. Permissible human exposure
• BS EN ISO 16170, 2016 Edition, In situ test methods for high efficiency filter systems in industrial facilities
• ISO 15858, 1st Edition, UV-C Devices - Safety information - Permissible human exposure
• ISO 16170, 1st Edition, In situ test methods for high efficiency filter systems in industrial facilities

For more standards like these, please refer to our Document Center List of Standards on Ventilation and Air-Conditioning Systems.

New Plastics Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Plastics in General are now available;

• ASTM D1043, 2016 Edition, Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
• ASTM D2857, 2016 Edition, Standard Practice for Dilute Solution Viscosity of Polymers
• ASTM D5226, 2016 Edition, Standard Practice for Dissolving Polymer Materials
• ASTM D6701, 2016 Edition, Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers
• BS ISO 14853, 2016 Edition, Plastics. Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system. Method by measurement of biogas production
• BS ISO 18830, 2016 Edition, Plastics. Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface. Method by measuring the oxygen demand in closed respirometer
• BS ISO 19679, 2016 Edition, Plastics. Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface. Method by analysis of evolved carbon dioxide
• ISO 11357-1, 3rd Edition, Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
• ISO 11469, 3rd Edition, Plastics - Generic identification and marking of plastics products
• ISO 14853, 2nd Edition, Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production
• ISO 18830, 1st Edition, Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface - Method by measuring the oxygen demand in closed respirometer
• ISO 19679, 1st Edition, Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide

For more standards like these, please refer to our Document Center List of Standards on Plastics in General.

New Syringes, Needles, and Catheters Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Syringes, Needles, and Catheters are now available;

• BS EN ISO 6009, 2016 Edition, Hypodermic needles for single use. Colour coding for identification
• BS EN ISO 7864, 2016 Edition, Sterile hypodermic needles for single use. Requirements and test methods
• BS EN ISO 80369-3, 2016 Edition, Small-bore connectors for liquids and gases in healthcare applications. Connectors for enteral applications
• BS ISO 18746, 2016 Edition, Traditional Chinese medicine. Sterile intradermal acupuncture needles for single use
• ISO 6009, 4th Edition, Hypodermic needles for single use - Colour coding for identification
• ISO 7864, 4th Edition, Sterile hypodermic needles for single use - Requirements and test methods
• ISO 9626, 2nd Edition, Stainless steel needle tubing for the manufacture of medical devices - Requirements and test methods
• ISO 11608-7, 1st Edition, Needle-based injection systems for medical use - Requirements and test methods - Part 7: Accessibility for persons with visual impairment
• ISO 18746, 1st Edition, Traditional Chinese medicine - Sterile intradermal acupuncture needles for single use
• ISO 80369-3, 1st Edition, Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications

For more standards like these, please refer to our Document Center List of Standards on Syringes, Needles, and Catheters.

New Particle Size Analysis and Sieving Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Particle Size Analysis and Sieving are now available;

• ASTM D502, 1989 Edition Reapproved in 2016, Standard Test Method for Particle Size of Soaps and Other Detergents
• ASTM D2862, 2016 Edition, Standard Test Method for Particle Size Distribution of Granular Activated Carbon
• ASTM E11, 2016 Edition, Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
• ASTM E323, 2011 Edition Reapproved in 2016, Standard Specification for Perforated-Plate Sieves for Testing Purposes
• ASTM E454, 2012 Edition Reapproved in 2016, Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
• ASTM E674, 2012 Edition Reapproved in 2016, Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
• BS 410-1, Withdrawn and Replaced by BS ISO 3310-1, Test sieves. Technical requirements and testing. Test sieves of metal wire cloth
• ISO 3310-1, 5th Edition, Test sieves - Technical requirements and testing - Part 1: Test sieves of metal wire cloth

For more standards like these, please refer to our Document Center List of Standards on Particle Size Analysis and Sieving. 

New Telecontrol and Telemetering Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Telecontrol and Telemetering are now available;

• BS EN 62325-351, 2016 Edition, Framework for energy market communications. CIM European market model exchange profile
• BS EN 62325-451-6, 2016 Edition, Framework for energy market communications. Publication of information on market, contextual and assembly models for European style market
• BS EN 62361-100, 2016 Edition, Power systems management and associated information exchange. Interoperability in the long term. CIM profiles to XML schema mapping
• IEC 61850-80-1, Edition 2.0, Communication networks and systems for power utility automation - Part 80-1: Guideline to exchanging information from a CDC-based data model using IEC 60870-5-101 or IEC 60870-5-104
• IEC 61970-552, Edition 2.0, Energy management system application program interface (EMS-API) - Part 552: CIMXML Model exchange format
• IEC 61970-555, Edition 1.0, Energy management system application program interface (EMS-API) - Part 555: CIM based efficient model exchange format (CIM/E)
• IEC 61970-556, Edition 1.0, Energy management system application program interface (EMS-API) - Part 556: CIM based graphic exchange format (CIM/G)
• IEC 62325-451-2, Corrigendum 1 for Edition 1.0, Framework for energy market communications - Part 451-2: Scheduling business process and contextual model for CIM European market
• IEC 62351-11, Edition 1.0, Power systems management and associated information exchange - Data and communications security - Part 11: Security for XML documents
• IEC 62351-13, Edition 1.0, Power systems management and associated information exchange - Data and communications security - Part 13: Guidelines on security topics to be covered in standards and specifications

For more standards like these, please refer to our Document Center List of Standards on Telecontrol and Telemetering.

New Fiber Optic Interconnecting Devices Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Fiber Optic Interconnecting Devices are now available;

• BS EN 61300-2-37, 2016 Edition, Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Cable bending for fibre optic closures
• BS EN 61300-2-47, 2016 Edition, Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Thermal shocks
• BS EN 62343-3-1, 2016 Edition, Dynamic modules. Performance specification templates. Dynamic channel equalizers
• IEC 61300-1, Edition 4.0, Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance
• IEC 61300-3-25, Edition 3.0, Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of non-angled ferrules and non-angled ferrules with fibre installed
• IEC 61753-052-3, Edition 2.0, Fibre optic interconnecting devices and passive components - Performance standard - Part 052-3: Single-mode fibre non-connectorized fixed attenuator - Category U in uncontrolled environment
• IEC 61753-052-6, Edition 1.0, Fibre optic interconnecting devices and passive components - Performance standard - Part 052-6: Single-mode fibre non-connectorized fixed attenuator - Category O in outside plant environment
• IEC 61754-32, Edition 1.0, Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 32: Type DiaLink connector family
• IEC 61754-34, Edition 1.0, Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 34: Type URM connector family

For more standards like these, please refer to our Document Center List of Standards on Fiber Optic Interconnecting Devices.

New Mechanical Testing of Metals Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Mechanical Testing of Metals are now available;

• ASTM E8, 2016A Edition, Standard Test Methods for Tension Testing of Metallic Materials
• ASTM E345, 2016 Edition, Standard Test Methods of Tension Testing of Metallic Foil
• ASTM E647, 2015 Edition with Editorial Correction, Standard Test Method for Measurement of Fatigue Crack Growth Rates
• ASTM E1921, 2016 Edition, Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
• BS EN ISO 3928, 2016 Edition, Sintered metal materials, excluding hardmetals. Fatigue test pieces
• BS EN ISO 6508-1, 2016 Edition, Metallic materials. Rockwell hardness test. Test method
• BS EN ISO 6892-1, 2016 Edition, 2016 Edition, Metallic materials. Tensile testing. Method of test at room temperature
• DIN EN ISO 7438, 2016 Edition, Metallic materials - Bend test
• ISO 6508-1, 4th Edition, Metallic materials - Rockwell hardness test - Part 1: Test method
• ISO 6892-1, 2nd Edition, Metallic materials - Tensile testing - Part 1: Method of test at room temperature
• ISO 27306, 2nd Edition, Metallic materials - Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components

For more standards like these, please refer to our Document Center List of Standards on Mechanical Testing of Metals.

New Fasteners for Aerospace Construction Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Fasteners for Aerospace Construction are now available;

• BS 2SP-90, 2008 Edition with Amendment 1, Specification for corrosion-resisting steel split cotter pins for aircraft. Inch series
• BS EN 6080, 2016 Edition, Aerospace series. Rivet, 100° normal flush head, close tolerance. Inch series
• BS EN 6090, 2016 Edition, Aerospace series. Washer, retaining
• BS EN 6092, 2016 Edition, Aerospace series. Receptacle, floating, double lug
• BS EN 6094, 2016 Edition, Aerospace series. Washer, spring, countersunk
• BS EN 6101, 2016 Edition, Aerospace series. Rivet, 100° medium flush head, close tolerance. Inch series
• BS EN 6105, 2016 Edition, Aerospace series. Stud with shoulder
• BS EN 6129, 2016 Edition, Aerospace series. Blind bolt, protruding head, high strength, pulltype
• BS ISO 8168, 2016 Edition, Aerospace. Bolts, with MJ threads, made of heat and corrosion resisting steel, strength class 1 100 MPa. Procurement specification
• ISO 8168, 3rd Edition, Aerospace - Bolts, with MJ threads, made of heat and corrosion resisting steel, strength class 1 100 MPa - Procurement specification

For more standards like these, please refer to our Document Center List of Standards on Fasteners for Aerospace Construction. 

New Implants For Surgery, Prosthetics, And Orthotics Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Implants for Surgery, Prosthetics, and Orthotics are now available;

• ASTM F1634, 1995 Edition Reapproved in 2016, Standard Practice for In-Vitro Environmental Conditioning of Polymer Matrix Composite Materials and Implant Devices
• ASTM F2777, 2016 Edition, Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion
• BS EN ISO 10328, 2016 Edition, Prosthetics. Structural testing of lower-limb prostheses. Requirements and test methods
• BS EN ISO 22675, 2016 Edition, Prosthetics. Testing of ankle-foot devices and foot units. Requirements and test methods
• BS ISO 5832-1, 2016 Edition, Implants for surgery. Metallic materials. Wrought stainless steel
• BS ISO 7206-12, 2016 Edition, Implants for surgery. Partial and total hip joint prostheses. Deformation test method for acetabular shells
• BS ISO 7206-13, 2016 Edition, Implants for surgery. Partial and total hip joint prostheses. Determination of resistance to torque of head fixation of stemmed femoral components
• BS ISO 7207-2, 2011 Edition with Amendment 1, Implants for surgery. Components for partial and total knee joint prostheses. Articulating surfaces made of metal, ceramic and plastics materials
• BS ISO 14242-2, 2016 Edition, Implants for surgery. Wear of total hip-joint prostheses. Methods of measurement
• BS ISO 14243-2, 2016 Edition, Implants for surgery. Wear of total knee-joint prostheses. Methods of measurement
• BS ISO 15674, 2016 Edition, Cardiovascular implants and artificial organs. Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags
• BS ISO 15675, 2016 Edition, Cardiovascular implants and artificial organs. Cardiopulmonary bypass systems. Arterial blood line filters
• BS ISO 15676, 2016 Edition, Cardiovascular implants and artificial organs. Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO)
• BS ISO 18241, 2016 Edition, Cardiovascular implants and extracorporeal systems. Cardiopulmonary bypass systems. Venous bubble traps
• BS ISO 18242, 2016 Edition, Cardiovascular implants and extracorporeal systems. Centrifugal blood pumps
• ISO 5832-1, 5th Edition, Implants for surgery - Metallic materials - Part 1: Wrought stainless steel
• ISO 7198, 2nd Edition, Cardiovascular implants and extracorporeal systems - Vascular prostheses - Tubular vascular grafts and vascular patches
• ISO 7206-2, Amendment 1 for the 3rd Edition, Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 2: Articulating Surfaces Made of Metallic, Ceramic and Plastics Materials
• ISO 7206-12, 1st Edition, Implants for surgery - Partial and total hip joint prostheses - Part 12: Deformation test method for acetabular shells
• ISO 7206-13, 1st Edition, Implants for surgery - Partial and total hip joint prostheses - Part 13: Determination of resistance to torque of head fixation of stemmed femoral components
• ISO 7207-2, Amendment 1 for the 2nd Edition, Implants for surgery - Components for partial and total knee joint prostheses - Part 2: Articulating surfaces made of metal, ceramic and plastics materials
• ISO 14242-2, 2nd Edition, Implants for surgery - Wear of total hip-joint prostheses - Part 2: Methods of measurement
• ISO 14243-2, 3rd Edition, Implants for surgery - Wear of total knee-joint prostheses - Part 2: Methods of measurement
• ISO 15674, 3rd Edition, Cardiovascular implants and artificial organs - Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags
• ISO 15675, 3rd Edition, Cardiovascular implants and artificial organs - Cardiopulmonary bypass systems - Arterial blood line filters
• ISO 15676, 2nd Edition, Cardiovascular implants and artificial organs - Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO)
• ISO 18241, 1st Edition, Cardiovascular implants and extracorporeal systems - Cardiopulmonary bypass systems - Venous bubble traps
• ISO 18242, 1st Edition, Cardiovascular implants and extracorporeal systems - Centrifugal blood pumps
• ISO 19024, 1st Edition, Evaluation of CPB devices relative to their capabilities of reducing the transmission of gaseous microemboli (GME) to a patient during cardiopulmonary bypass

For more standards like these, please refer to our Document Center List of Standards on Implants for Surgery, Prosthetics, and Orthotics.

New Kitchen Equipment Standards for the 3rd Quarter 2016

Document Center, Inc. is pleased to announce that the following Standards on Kitchen Equipment are now available;

• ASTM C329, 1988 Edition Reapproved in 2016, Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
• ASTM C368, 1988 Edition Reapproved in 2016, Standard Test Method for Impact Resistance of Ceramic Tableware
• ASTM C373, 2016 Edition, Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products
• ASTM F2143, 2016 Edition,  Standard Test Method for Performance of Refrigerated Buffet and Preparation Tables
• BS EN 203-1, Corrigendum 1 for 2014 Edition, Gas heated catering equipment. General safety rules
• BS EN 60335-2-25, Corrigendum 1 for 2012 Edition, Household and similar electrical appliances. Safety. Particular requirements for microwave ovens, including combination microwave ovens
• BS EN 60335-2-35, Corrigendum 1 for 2016 Edition, Household and similar electrical appliances. Safety. Particular requirements for instantaneous water heaters
• BS EN 60350-1, Corrigendum 1 for 2013 Edition, Household electric cooking appliances. Ranges, ovens, steam ovens and grills. Methods for measuring performance
• DIN EN 14749, 2016 Edition, Furniture - Domestic and kitchen storage units and kitchen-worktops - Safety requirements and test methods

For more standards like these, please refer to our Document Center List of Standards on Kitchen Equipment.